DOI QR코드

DOI QR Code

Magnetic Field and Electric Field Generated in an HTS Tape of a High Temperature Superconducting Magnet

고온 초전도 마그넷의 선재에서 발생되는 자장과 전계 해석

  • 김영민 (순천향대 전기통신공학과) ;
  • 구명환 (순천향대 전기통신공학과) ;
  • 차귀수 (순천향대 전기통신공학과) ;
  • 전창완 (순천향대 전기통신공학과) ;
  • 백경호 (순천향대 전기통신공학과)
  • Received : 2010.12.02
  • Accepted : 2011.02.28
  • Published : 2011.04.01

Abstract

Magnetic field and Electric field of High Temperature Superconducting magnet are very important to analysis of superconducting magnet. The maximum perpendicular magnetic field was applied to the outermost pancake windings. The critical current of all the magnet windings is limited by the critical current of the outermost pancake windings. The E-J relation was used to determine the critical current, and an evolution s trategy was adopted for the optimization of gap length between each pancake windins. The results of calculations show that the critical current and the central magnetic field and uniformity increased by 82.6% and 31.6% and 50.8%, respectively, for a magnet consisting of ten pancake windings. This paper did an analysis the cause of increase the critical current and central magnetic field and uniformity in no gap and optimal gap model.

Keywords

References

  1. C. Wang et al., "Electromagnetic optimization design of a HTS magnet using the improved hybrid genetic algorithm," Cryogenics, vol. 46, pp. 349-353, 2006. https://doi.org/10.1016/j.cryogenics.2005.08.007
  2. M. Tsuchiya, et al., "Development of Superconducting Split Magnets for NMR Spectrometer", IEEE Trans. Appl. Supercond. Vol.18, no.2, pp.840-843, 2008. https://doi.org/10.1109/TASC.2008.920683
  3. Myunghun Kang, et al., "Current Estimation of an HTS BSCCO magnet Having Multiple Power Sources Based on the Field dependent E-J Relation," IEEE Trans. Appl. Supercond. Vol.19, no.3, pp.1257-1261, 2009. https://doi.org/10.1109/TASC.2009.2018042
  4. P. E. Richens and H. Jones, "A detailed study of the design, construction and cryo-operation of an HTS magnet," IEEE Trans. Appl. Superconduct., vol. 12, no. 1, pp. 1741-1746, 2002. https://doi.org/10.1109/TASC.2002.1018744
  5. M. Kang, M. Koo, H. Lee, and G. Cha, "Increment of the central magnetic field of an YBCO magnet by using multiple power sources," IEEE Trans. Appl. Superconduct., vol. 19, no. 3, pp. 1253-1256, 2009. https://doi.org/10.1109/TASC.2009.2017833
  6. M. Kang, M. Koo, H. Lee, and G. Cha, "The effects of the air gap between pancake windings on the central magnetic field in a high temperature superconducting magnet," Cryogenics, vol. 50, no. 2, pp. 78-83, 2010. https://doi.org/10.1016/j.cryogenics.2009.11.007
  7. Y. Jo, Y. Kwon, Y. Kim and J. Hong, "Design of high temperature superconducting magnet," IEEE Trans. Appl. Superconduct., vol. 12, no. 1, pp. 721-724, 2002. https://doi.org/10.1109/TASC.2002.1018503
  8. T. M. Qu, C. Gu, M.Y.Li, and Z. Han, "V-I properties and n value of degraded Bi-2223/Ag superconducting tapes," Physica C 426 (2005), p. 1159-1163.
  9. H. Kumakura, A. Matsumoto, Y.S. Sung and H. Kitaguchi, "E-J characteristics of Bi-2212/Ag and Bi-2223/Ag tape conductors," Physica C 384 (2003), p. 283-290. https://doi.org/10.1016/S0921-4534(02)01880-4
  10. M. Kasper, "Shape optimization by evolution strategy," IEEE Trans. Magn., vol. 28, no. 2, pp. 1556-1559, 1992. https://doi.org/10.1109/20.123995