참고문헌
- J. W. Kim, D. G. Kim, and S. B. Jung, "Valuation of Thermomechanical Reliability of Flip Chip Solder Joints (II)", J. Kor. Inst. Met. & Mater., 44(8), 587 (2006).
- Kim, J. W., Kim, D. G., Ha, S. S., Moon, W. C., Yoo, C. S., Moon, J. H., and Jung, S. B., "Valuation of Thermo-mechanical Reliability of Flip Chip Solder Joints (I)", J. Kor. Inst. Met. & Mater.,44(8), 581 (2006).
- F. Song and S. W. Ricky Lee, "Investigation of IMC Thickness Effect on the Lead-free Solder Ball Attachment Strength", Proc. 56th Electronic Components and Technology Conference (ECTC), San Diego, 1196, IEEE Components, Packaging and Manufacturing Technology Society (CMPT) (2006).
- W. S. Hong, W. S. Kim, N. C. Park, and K. B. Kim, "Activation Energy for Intermetallic Compound Formation of Sn- 40Pb/Cu and Sn-3.0Ag-0.5Cu/Cu Solder Joints", Journal of KWJS, 25(2), 184 (2007).
- H. Nishikawa, K. Miki, and T. Takemoto, "Effect of Aging Conditions on Impact Strength of Sn-3.5 Based Solder Joint", 9th Electronics Packaging Technology Conference (EPTP), Sanghai, 553, IEEE Components, Packaging and Manufacturing Technology (CMPT) (2007).
- Y. L. Huang, K. L. Lin and D. S. Liu, "Effect of Impact Rate on the Strength of Lead-free Solder Joints", 10th Electronics Packaging Technology Conference (EPTP), Sanghai, 1369, IEEE Components, Packaging and Manufacturing Technology (CMPT) (2008).
- H. F. Zou, and Z. F. Zhang, "Ductile-to-brittle transition induced by increasing strain rate in Sn-3Cu/Cu joints", J. Mater. Res., 23(6), 1614 (2008). https://doi.org/10.1557/JMR.2008.0214
- Y. L. Huang, and K. L. Lin, "The micro-impact fracture behavior of lead-free solder ball joints", J. Mater. Res., 23(4), 1057 (2008). https://doi.org/10.1557/jmr.2008.0129
- G. Tang, B. An, Y. Wu, and F. Wu, "Finite Element Analysis of Sn-Ag-Cu Solder Joint Failure under Impact Test", International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP), Sanghai, 1220, IEEE Components, Packaging and Manufacturing Technology Society (CMPT) (2009).
- B. Y. Wu, H. W. Zhong, Y. C. Chan, and M. O. Alam, "Shearing tests of solder joints on tape ball grid array substrates", J. Mater. Res., 21(9) 2224 (2006). https://doi.org/10.1557/jmr.2006.0296
- D. H. Jung, Y. G. Lee, and J. P. Jung, "Shearing Characteristics of Sn3.0Ag0.5Cu Solder Ball for Standardization of High Speed Shear Test", J. Microelectron. Packag. Soc., 18(1), 35 (2011).
- C. Y. Lin, Y. R. Chen, and G. S. Shen, "Failure Mode Analysis of Lead-free Solder Joints under Differential Reflow Profiles by High Speed Impact Testing", International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP), Sanghai, 1024, IEEE Components, Packaging and Manufacturing Technology Society (CMPT) (2008).
- J. H. Ahn, K. S. Kim, Y. C. Lee, Y. G. Kim and S. B. Jung, "Regulation in Shear Test Method for BGA of Flip-chip Package", J. Microelectron. Packag. Soc., 17(3), 1 (2010).