초록
본 논문에서는 차량 후면 유리에 여러 주파수 대역의 안테나를 집적화할 수 있는 유리접지를 이용한 안테나 급전 방법을 제안하였다. 유리접지가 가능하도록 동축 선로를 유리접지면에 직접 연결할 수 있는 어댑터를 설계하였으며, 차체 접지 방식과 반사 손실을 비교 분석하였다. Azimuth 방향에서 높은 복사 이득을 얻기 위해 유리 접지의 크기와 위치를 최적화 하였으며, 도출된 유리접지면을 이용하여 삼각 패치 형상의 WiBro 안테나를 상용세단의 후면 유리에 인쇄하고 반사 손실과 복사 패턴 성능을 측정하였다. 제안된 유리접지를 이용한 급전 방식은 차체 접지를 이용한 급전 방식과 유사한 반사 손실을 보이며, 2 dB 높은 azimuth 복사 이득이 나타내었다. 측정 결과, 제안된 유리접지면을 이용한 안테나 급전 방식을 이용하면 여러 주파수에서 동작하는 다양한 형태의 온-글래스 안테나를 후면 유리에 효과적으로 적용할 수 있음을 확인하였다.
In this paper, we propose a novel feeding method that uses a windshield ground in a vehicle. The feeding method enables for various antennas to integrate easily in a vehicle windshield. To connect a coaxial feeding cable directly to the windshield ground, we inserted a coaxial-to-ground adapter between the cable and the ground, and reflection coefficients using the proposed feeding method were compared to that using a conventional feeding method. The size and position of the windshield ground were optimized in order to achieve a high radiation gain in the azimuth direction. Then the triangular WiBro patch antenna, incorporating the proposed feeding method, was designed and installed on a rear windshield of a commercial sedan. The antenna using the proposed feeding method shows a similar reflection coefficient, and it shows 2 dB increased average azimuth radiation gain compared to that using a conventional sash ground method. These results demonstrate that the proposed feeding method can be applicable for integrating multiple antennas in a rear windshield.