DOI QR코드

DOI QR Code

Mod. 9Cr-1Mo강의 크리프 균열 성장 법칙의 파라메터 B와 q의 통계적 성질에 관한 연구

On the Statistical Properties of the Parameters B and q in Creep Crack Growth Law, da/dt=B(C*)q, in the Case of Mod. 9Cr-1Mo Steel

  • Kim, Seon-Jin (Dept. of Mechanical & Automotive Engineering, Pukyong Nat'l Univ.) ;
  • Park, Jae-Young (Dept. of Mechanical & Automotive Engineering, Pukyong Nat'l Univ.) ;
  • Kim, Woo-Gon (Korea Atomic Energy Research Institute)
  • 투고 : 2010.09.13
  • 심사 : 2011.01.05
  • 발행 : 2011.03.01

초록

본 연구는 차세대 원자로의 후보 재료인 수정 9Cr-1Mo 강에 대한 크리프 균열 성장률 법칙, da/dt=B$(C^*)^q$의 파라메터 B와 q에 대한 통계적 성질에 대하여 취급하였다. 본 해석에 이용된 크리프 균열 성장 데이터는 $600^{\circ}C$의 일정 온도에서 5000N의 동일 하중하의 1/2 CT 시험편에 대하여 크리프 균열 성장 실험을 수행하였다. 크리프 균열 성장 거동은 크리프 균열 성장률 da/dt 와 파괴역학 파라메터 $C^*$와의 실험적 관계식으로부터 통계적으로 해석하였다. 각각의 시험편에 대한 파라메터 B와 q는 최소자승법에 의하여 결정하였다. B와 q에 대한 확률분포함수를 정규분포, 대수정규분포 그리고 와이블분포에 대하여 조사하였다. 본 연구에 의하면, B와 q의 확률분포함수는 대수정규분포와 와이블분포에 비교적 잘 따름을 알았다. 또한 이들 사이에는 강한 양의 선형적인 상관이 있음을 알았다.

This paper deals with the statistical properties of parameters B and q in the creep crack growth rate (CCGR) law, da/dt=B$(C^*)^q$, in Mod. 9Cr-1Mo (ASME Gr.91) steel which is considered a candidate materials for fabricating next generation nuclear reactors. The CCGR data were obtained by creep crack growth (CCG) tests performed on 1/2-inch compact tension (CT) specimens under an applied load of 5000N at a temperature of $600^{\circ}C$. The CCG behavior was analyzed statistically using the empirical equation between CCGR, da/dt and the creep fracture mechanics parameter, $C^*$. The B and q values were determined for each specimen by the least-squares fitting method. The probability distribution functions for B and q were investigated using normal, log-normal, and Weibull distributions. As far as this study is considered, it can be appeared that B and q followed the log-normal and Weibull distributions. Moreover, a strong positive linear correlation was found between B and q.

키워드

참고문헌

  1. Orr, J. and Burton, D., 1994, "Improving the Elevated Temperature Strength of Steel 91(9%CrMoNbVN)," Materials for Advanced Power Engineering, Vol. 1, pp. 263-280.
  2. Cadek, J., Sustek, V. and Pahutova, M., 1997, "An Analysis of Set of Creep Data for a 9Cr-1Mo-0.2V (P91 type) Steel," Material Science and Engineering: A, Vol. 225, pp. 22-28. https://doi.org/10.1016/S0921-5093(96)10569-4
  3. Lee, H. Y. and Lee, J. H., 2010, "Development of Assessment Methodology on Creep-Fatigue Crack Behavior for a Grade 91 Steel Structure," Trans. of the KSME(A), Vol. 34, No. 1, pp. 103-110.
  4. Hamata, N., Mat L. and Shibli IA, 2001,"Creep Crack Growth of Seam Welded P22/P91 Pipes with Artificial Defects. Part II. Data Analysis," International Journal of Pressure Vessels and Piping, Vol. 78, pp. 827-835. https://doi.org/10.1016/S0308-0161(01)00097-7
  5. Nikbin, K. M., Yatomi, M., Wasmer, K. andWebster G. A., 2003, "Probabilistic Analysis of Creep Crack initiation and Growth in Pipe Components," International Journal of Pressure Vessels and Piping, Vol. 80, pp. 585-595. https://doi.org/10.1016/S0308-0161(03)00111-X
  6. Deschanels, H., Escaravage, C., Thiry, J. M.,Hamata, N. and Colantoni, D., 2006, "Assessment of Industrial Components in High Temperature Plant Using the ALIAS-HIDA- A Case Study," Engineering Failure Analysis, Vol. 13, pp. 767-779. https://doi.org/10.1016/j.engfailanal.2005.02.017
  7. Dogan, B. and Ptrovski, B., 2001, "Creep Crack Growth of High Temperature Weldment," International Journal of Pressure Vessels and Piping, Vol. 78, pp. 795-805. https://doi.org/10.1016/S0308-0161(01)00092-8
  8. Yamamoto, M., Miura, N. and Ogata, T., 2010, "Applicability of C* Parameter in Assessing Type IV Creep Cracking in Mod. 9Cr-1Mo steel Welded Joint," Engineering Fracture Mechanics, (In Press)
  9. Hyde, T. H., Saber, M. and Sun, W., 2010, "Testing and Modelling of Creep Crack Growth in Compact tension Specimens from a P91 Weld at $650^{\circ}C$," Engineering Fracture Mechanics, (In Press)
  10. Maleki, S., Zhang, Y. and Nikbin, K., 2010, "Prediction of Creep Crack Growth Properties of P91 Parent and Welded Steel Using Remaining Failure Strain Criteria," Engineering Fracture Mechanics, (In Press)
  11. Jung, I. H., Kim, W. G., Yin, S. N., Ryu, W. S. and Kim, S. J., 2009, "Statistical Analysis for Creep Crack Growth Behavior of Mod. 9Cr-1Mo Steel," J. Kor. Inst. Met & Mater., Vol. 47, No. 5, pp. 283-289.
  12. Jung, I. H., 2009, "Statistical Analysis of Creep Crack Growth Behavior by Monte-Carlo Simulation for Grade 9Cr-1Mo Steel," Master Thesis, Pukyong National University
  13. Cliniak, J. T., Harlow, D. G. and Delph, T. J., "A Probabilistic Model for the Growth of Creep Crack," Engineering Fracture Mechanics, Vol. 57, No. 1, pp. 25-39.
  14. Ozmat, B., Argon, A. S. and Parks, D. M., 1991, "Growth Modes of Cracks in Creeping Type 304 Stainless Steel,", Mech. Mater., Vol. 11, pp. 1-17. https://doi.org/10.1016/0167-6636(91)90036-Y
  15. ASTM E1457-07, 2007, "Standard Test Method for Measurement of Creep Crack Growth Rates in Metals", ASTM
  16. Yatomi, M., 2003, "Factors Affecting the Failure Cracked Components at Elevated Temperature," Imperial College London, pp. 43-59.
  17. Jeong, H. C. and Kim, S. J., 2003, "Probabilistic Fatigue Crack Growth Behavior under Constant Amplitude Loads," Trans. of the KSME(A), Vol. 27, No. 6, pp. 923-929. https://doi.org/10.3795/KSME-A.2003.27.6.923