DOI QR코드

DOI QR Code

반구형 극소 드로인 제품의 두께분포 비교

Thickness Distribution of Hemispherical Cup in Meso-Scale Deep Drawing Process

  • 이기성 (서울과학기술대학교 산업대학원 정밀기계공학과) ;
  • 정효기 (서울과학기술대학교 제품설계금형공학과) ;
  • 김종봉 (서울과학기술대학교 자동차공학과) ;
  • 김종호 (서울과학기술대학교 제품설계금형공학과)
  • 투고 : 2010.12.27
  • 심사 : 2011.01.24
  • 발행 : 2011.02.01

초록

Meso-scale or micro-scale forming of sheet metal parts has been recently considered as one of the important forming technologies with growing demand on meso/micro products for electric or medical devices. Experimental investigation on the cylindrical meso-cup drawing with hemispherical punch is carried out to examine the limit drawing ratio and thickness distribution of drawn cups. The working parameters chosen in this study are blank diameter, die-corner radius and blankholding force. It is found from the experiments that the limit drawing ratio of 2.4 can be achieved in the case of hemispherical cup drawing and uniform thickness distribution in wider region can be obtained compared with the results of conventional cup drawing.

키워드

참고문헌

  1. N. K. Lee, H. J. Lee, S. O. Choi, 2005, Development of micro metal forming system technology in micro factory, Proc. of the Kor. Soc. of Mech. Tool Eng. Conf., pp. 420-425.
  2. D. W. Jung, J. S. Hwang, 2004, A study of forming analysis by using dynamic-explicit finite element method in auto-body stamping, J. Kor. Soc. Manuf. Process. Eng., Vol. 3, No. 4, pp. 63-72.
  3. J. K. Lee, M. S. Kang, 1989, A study on the effect of die profile radius on formability in deep-drawing process with spring-type blankholder system, Trans. of The Kor. Soc. of Automot. Eng., Vol. 11, No. 4, pp. 35-42.
  4. J. K. Lee, M. S. Kang, 1989, A study on the blankholding force in deep drawing process, Trans. Kor. Soc. Mech. Eng., Vol. 13, No. 5, pp. 886-900.
  5. C. H. Lee, H. B. Shim, D. Y. Yang, 1983, Analysis of stretch-forming by hemispherical punch with friction, Proc. of the KSME Conf., No. 1, pp. 329-333.
  6. Yasumasa Chino, Kensuke Sassa, Mamoru Mabuchi, 2009, Enhanced stretch formability of Mn-free AZ31 Mg alloy rolled by cross-roll rolling, J. Mater. Sci. Vol. 44, No. 7, pp. 1821-1827. https://doi.org/10.1007/s10853-009-3248-7
  7. Tung-Sheng Yang, Tze-Chi Hsu, 2001, Forming limit analysis of hemispherical-punch stretch forming, J. Mater. Process. Technol., Vol. 117, Issues 1-2, pp. 32-36. https://doi.org/10.1016/S0924-0136(01)01104-9
  8. Sinnathamby Thiruvarudchelvan, Thirumany Sritharan, 2003, Properties of hemispherical cups drawn using a flexible tool, J. Mater. Process. Technol., Vol. 134, Issue 3, pp. 310-317. https://doi.org/10.1016/S0924-0136(02)01115-9
  9. S. S. Park, K. B. Hwang, J. B. Kim, J. H. Kim, 2010, Investigation of deep drawability and product qualities of ultra thin beryllium copper sheet metal, Trans. Mater. Process., Vol. 19, No. 3, pp. 179-184. https://doi.org/10.5228/KSPP.2010.19.3.179
  10. K. S. Lee, J. H. Kim, J. B. Kim, W. J. Jung, 2010, Influence of blankholding force on deep drawability of thin sheet metal, Proc. of KSPE Autumn Conf., pp. 165-167.

피인용 문헌

  1. Influence of Drawing Speed and Blank Holding Force in Rectangular Drawing of Ultra Thin Sheet Metal vol.21, pp.6, 2012, https://doi.org/10.5228/KSTP.2012.21.6.348
  2. Formability and Dimensional Characteristics of Stretch-Drawn Beryllium-Copper Sheet Products vol.20, pp.5, 2011, https://doi.org/10.5228/KSTP.2011.20.5.357