Acknowledgement
Supported by : 금오공과대학교
References
- Malloy, R.A., "Plastic Part Design for Injection Molding": An Introduction, Hanser / Gardner Publishers, Inc., Cincinnati, pp. 75-84, 1994.
- Ni, S., "Reducing shrinkage and warpage for printer parts by injection molding simulation analysis", Journal of Injection Molding Technology, Vol. 6, No. 3, pp. 177-186, 2002.
- Subramanian, N.R., Tingyu, L. and Seng, Y.A., "Optimizing warpage analysis for an optical housing", Mechatronics, Vol. 15, pp. 111-127, 2005. https://doi.org/10.1016/j.mechatronics.2004.05.004
- 신남호, 오희성, 강승규, "CAE를 응용한 사출성형 최적화", 대광서림, pp. 319-326, 2007.
- Park, S.H, "Robust Design and Analysis for Quality Engineering", Chapman & Hall, pp. 65-120, 1996.
- 박성현, "현대실험계획법", 민영사, pp. 377-433, 2006.
- Chen, R.S., Lee, H.H. and Yu, C.Y., "Application of Taguchi's method on the optimal process design of an injection molded PC/PBT automobile bumper", Composite Structures, Vol. 39, Nos 3-4, pp. 209-214, 1997. https://doi.org/10.1016/S0263-8223(97)00110-4
- 권태헌, 박성진, 윤경환, 이상봉, 정영득, "사출성형 CAE 설계지침", 문운당, pp. 138-219, 2001.
- Lee, B.H. and Kim, B.H., "Optimization of Part Wall Thickness to Reduce Part Warpage Based on the Modified Complex Method", Polym.-Plast. Tech. Eng., Vol. 34, No. 5, pp. 793-811, 1995. https://doi.org/10.1080/03602559508009600
- Phadke, M.S., "Quality Engineering using Robust Design, AT&T Bell Laboratories", pp. 41-59, 1992.
- ED&C, Autodesk Moldflow Insight: The 4th edition of AMI Korean Manual, 2009.