Journal of Construction Engineering and Project Management

Korea Institute of Construction Engineering and Management (한국건설관리학회)
권호 표지
DOI QR코드

DOI QR Code

3-D Temporary Facility Visualization Using BIM(Building Information Modeling) Technology

  • Published : 2011.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

The key role in safety management is to identify any possible hazard before it occurs by identifying any possible risk factors which are critical to risk assessment. It is well known that falsework (temporary facilities) in construction projects is fundamentally important. This planning/assessment process is considered to be tedious and requires a lot of attention due to the following reasons: firstly, the installation and dismantling of those facilities are one of the high risk activities in the job sites. Secondly, temporary facilities are generally not clearly delineated on the building drawings. Therefore, it is our strong belief that safety tools have to be simple and convenient enough for the jobsite people to manage them easily and be flexible for any occasions to be occurred at various degrees. In order to develop a safety identification system of temporary facilities, this research utilizes the BIM technology in retrieving important information by importing data from BIM models and use it in the safety planning stage.

Keywords

References

  1. Jaselskis, E., Anderson, S., and Russel, J., "Strategies for Achieving Excellence in Construction Safety Performance", Journal of Construction Engineering and Management, Vol.122, pp.61-70, 1996. https://doi.org/10.1061/(ASCE)0733-9364(1996)122:1(61)
  2. Hinze, J. and Russel, D., "Analysis of Fatalities Recorded by OSHA", Journal of Construction Engineering and Management, Vol. 121, pp. 209-214, 1995 https://doi.org/10.1061/(ASCE)0733-9364(1995)121:2(209)
  3. Carter, G., and Smith, S., "Safety Hazard Identification on Construction Projects", Journal of Construction Engineering and Management, Vol. 132, pp. 197-205, 2006. https://doi.org/10.1061/(ASCE)0733-9364(2006)132:2(197)
  4. Garza, J., Hancher, D., and Decker, L.."Analysis of Safety Indicators in Construction",,, Journal of Construction Engineering and Management, Vol. 124, pp. 312-314. https://doi.org/10.1061/(ASCE)0733-9364(1998)124:4(312)
  5. Hadikusumo, B., Rowlinson, S. (2002). "Integration of virtually real Construction model and design-for-safety-process database", Automation in Construction, 11, 501-509. https://doi.org/10.1016/S0926-5805(01)00061-9
  6. Hinze, J., and Gambatese, J., "Factors That Influence Safety Performance of Specialty Contractors", Journal of Construction Management and Engineering, Vol. 129, pp. 159-164, 2003. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:2(159)
  7. Huang, T., Kong, C., Guo, H., Baldwin, A., Li, H. (2007). A virtual prototyping system for simulating the construction process, Automation in Construction, 16, 576-585. https://doi.org/10.1016/j.autcon.2006.09.007
  8. Jannadi, O. and Almishari, S. "Risk Assessment in Construction", Journal of Construction Management and Engineering, Vol. 129, pp. 492-500, 2003. https://doi.org/10.1061/(ASCE)0733-9364(2003)129:5(492)
  9. Kartam, N. "Integrating Safety and Health Performance into Construction CPM", Journal of Construction Management and Engineering, Vol. 123, pp. 121-126, 1997 https://doi.org/10.1061/(ASCE)0733-9364(1997)123:2(121)
  10. Reese, C.D. & Eidson, J.V. (2006), "Handbook of OSHA Construction Safety and Health", pp. 1 -5
  11. Slaughter, S. (2005). "The link between design and process: Dynamic process simulation models of construction activities", 4D CAD and visualization in construction :developments and applications, Gainesville, 145-164.

Cited by

  1. Cyber-physical systems for temporary structure monitoring vol.66, 2016, https://doi.org/10.1016/j.autcon.2016.02.005