DOI QR코드

DOI QR Code

산소감응성 입자 제조 및 특성 분석 연구

Fabrication of Oxygen Sensitive Particles and Characteristic Analysis

  • 투고 : 2011.12.08
  • 심사 : 2011.12.20
  • 발행 : 2011.12.31

초록

Oxygen sensitive functional particles(OSParticle) were fabricated by three different methods for using the particles as oxygen sensors and PIV tracers. The used methods were a physical coating method, an ion-exchange method and a dispersion polymerization method. The physical coating method is dipping $SiO_2$ hollow particles into dye solution then drying. This method is very simple, but particles are not uniform in diameter and luminescence. The particles fabricated by the ion-exchange method have very uniform diameter and well doped. However, it can not be used in water since the particles are hydrophobic. In case of the dispersion polymerization method, the diameter of OSParticles is quite uniform. The diameter of OSParticles can be changed by controlling the quantity of AIBN (2,2'-azobis isobutyronitrile). For the purpose of dissolved oxygen concentration measurement in micro scale water flows, the dispersion polymerized OSParticles turn out to be the most superior functional particles. The luminescent intensity of OSParticles was tested with the variation of dissolved oxygen concentration in water samples. As a result, the luminescent intensity of OSParticles is monotonically decreased with increasing DO (Dissolved oxygen) concentration of water.

키워드

참고문헌

  1. R. J. Adrian, 1984, "Scattering Particle Characteristics and Their Effect on Pulsed Laser Measurements of Fluid Flow: Speckle Velocimetry vs. Particle Image Velocimetry", Applied Optics, Vol 23, pp.1690-1691. https://doi.org/10.1364/AO.23.001690
  2. T. Liu, B.T. Campbell, S.P. Burns and J.P. Sullivan, 1997, "Temperature and Pressure-Sensitive Luminescent Paints in Aerodynamics", Applied Mechanics Reviews, Vol.50, pp.227-246, https://doi.org/10.1115/1.3101703
  3. J. G. Santiago, S. T. Wereley, C. D. Meinhart, D. J. Beebe and R. J. Adrian, 1998, "A Particle Image Velocimetry System for Microfluidics", Exp. Fluids, Vol.25, pp.316-319. https://doi.org/10.1007/s003480050235
  4. D. H. Song, H. D. Kim and K. C. Kim, 2011, "Quantitative Visualization of Dissolved Oxygen Concentration Field in Micro Flows using PtOEP/PS Membrane", Journal of The Korean Society of Visualization, Vol.9(1), pp.36-41. https://doi.org/10.5407/JKSV.2011.9.1.036
  5. D. H. Song, H. D. Kim and K. C. Kim, 2011, "Measurement of Dissolved Oxygen Concentration Field in a Microchannel using PtOEP/PS Film", Jounal of Visualization, Vol.14(3), pp.295-304. https://doi.org/10.1007/s12650-011-0096-8
  6. S. Someya, S. Yoshida, Y. Li and K. Okamoto, 2009, "Combined Measurement of Velocity and Temperature Distributions in Oil based on The Luminescent Lifetimes of Seeded Particles," Meas. Sci. Technol. Vol. 20, 025403 (9pp).
  7. S. Someya, Y. Li, K. Ishii and K. Okamoto, 2011, "Combined Two-dimensional Velocity and Temperature Measurements of Natural Convection using a Highspeed Camera and Temperature-sensitive Particles", Exp Fluids, Vol. 50, pp.65-73. https://doi.org/10.1007/s00348-010-0894-0
  8. S. H. Im, G. E. Khalill, J. Callis, B. H. Ahn, M. Gouterman and Y. Xia, 2005, "Synthesis of Polystyrene Beads loaded with Dual Luminophors for Selfreferenced Oxygen Sensing," Talanta, Vol. 67 pp 492- 497. https://doi.org/10.1016/j.talanta.2005.06.046