초록
본 연구는 임도 설계자가 보다 간편하고 정확하게 임도 배수시설을 설계하는 데에 기여할 수 있는 임도 배수시설 규격 산정 프로그램을 개발하는 데에 목적이 있다. 본 프로그램의 특징은 임도설계자가 현장 측량을 하기에 앞서 실내에서 임도의 예측을 실시할 때 현장 측량을 통해 취득해야 하는 데이터가 없이도 간편하게 강우강도를 이용하여 유역 내 유출량을 산출할 수 있도록 하였다. 그리고 이를 통해 배수구조물의 최소 규격을 산출해 줌으로써 과도한 설계를 억제할 수 있게 하였다. 또한 임도가 시설되는 지역의 각 유역별 유출량을 산출함으로써 배수구조물의 적절한 배치에 기여코자 하였다. 특히 배수관의 설치에 따른 전과정을 보고서로 작성하여 파일 및 출력물 형태로 제공함으로써 합리적인 설계과정을 보여줄 뿐만 아니라 오류 발생시 즉각적인 수정이 가능케 함으로써 임도 설계기술의 상향평준화에 기여할 수 있을 것으로 생각된다.
The purpose of this study is to develop a standard calculation program of forest road drainage facilities that may help forest road designers to design forest road drainage facilities more conveniently and precisely. Especially, the characteristics of this program is that the forest road designers may calculate the amount of outflow in the basin using rainfall intensity data conveniently, without the data designers should acquire through site measurements when they carry out indoor preliminary measurements before they go out for outdoor measurements. In this manner, excessive design may be restrained by offering minimum standard calculation for drainage structures. And also this study was designed to facilitate proper layout of drainage structures by calculating outflow discharge of each basin where forest roads will be installed. Especially, this study will contribute to leveling-up of forest design techniques as the researcher has prepared the reports on whole process of drain pipe installation and provided them in the form of computer file or printout, which show a rational design process, and make it possible to modify in case of an error.