DOI QR코드

DOI QR Code

방치기간에 따른 PBD의 통수능 효과 분석

An Analysis of the Effect of PBD Discharge Capacity to Leave Period

  • 이기용 (서울시립대학교 토목공학과) ;
  • 박민철 (서울시립대학교 토목공학과) ;
  • 정상국 (송원대학교 공간환경시스템공학과) ;
  • 이송 (서울시립대학교 토목공학과)
  • 투고 : 2011.06.28
  • 심사 : 2011.09.05
  • 발행 : 2011.10.01

초록

최근 연약지반에서는 공사기간 중에 압밀에 의한 침하량이 빠르게 일어날 수 있도록 압밀시간을 단축시키는 압밀촉진공법 중 하나인 PBD공법이 적용되고 있다. 이는 시공의 용이성과 경제성을 지닌 압밀촉진 공법 중 하나이다. PBD는 통수능력이 연약층의 두께에 비례하여 영향을 크게 받는 성질이 있으며, 배수재 타설 방법과 관련하여 배수재 타입 시 사용되는 맨드럴, 타입기기 및 방식에 의한 주변지반의 교란영향으로 배수성능이 저하되는 등 문제점이 있다. 또한 지반조건, 시공조건, 토질특성에 따라 통수능의 편차가 크게 나타나며 PBD타설 후 강우나 성토재료 수급의 불안정 등 기타 현장여건에 따라 성토 재하중을 바로 실시하지 못해 수개월 동안 방치에 따른 배수재 통수능의 문제점 및 분석이 미흡한 실정이다. 따라서 본 연구에서는 방치기간에 따른 PBD 통수능의 영향인자를 분석하기 위한 복합 통수능 시험을 실시하여 지반개량 및 통수능 평가를 하였다. 원통형 실린더에 배수재를 고정한 후에 교반한 시료를 투기한 후 0day, 30day, 60day, 90day 방치시킨 후에 가압장치를 사용하여 30, 70, 120kPa의 하중을 가해 실험을 수행하였다. 실험결과, PBD 타설 후 방치기간이 길어질수록 통수능이 감소하는 것을 확인할 수 있었다. 이는 장기간 방치에 따른 PBD필터의 흡습에 기인된 크리프 변형으로 통수단면의 감소가 원인이라고 판단할 수 있다.

Recently PBD method, one of acceleration of consolidation methods is used in the soft ground to shorten consolidation time for fast settlement during construction. It is economical and easy to work. Discharge capacity of PBD is sensitive in proportion to thickness of soft ground layer, and drainage of PBD declines due to disturbance effect in surrounding ground by mandrel used for vertical drainage setting and setting machines and type. Also, deviation of discharge capacity is large according to ground condition, construction condition and soil properties. In addition, when embankment loading is not conducted instantly after PBD setting due to rain or lack of embankment material supply, it causes leaving period problems. But cause and analysis of those problems for discharge capacity is lack. So, in this test, ground improvement and discharge capacity is investigated by implementing composite discharge capacity test for analysis of an effect factor of PBD discharge capacity with leaving period. After fixing the vertical drain on a cylindrical cylinder, put churned sample into the cylinder. Then leave 0day, 30day, 60day and 90day. And then, load following the loading step of 30, 70 and 120kPa using a pressure device. As a result, the longer leaving period, discharge capacity is reduced. It is caused by a decrease of discharge area caused by creep transformation moisture absorption of PBD filter after long leaving period.

키워드

과제정보

연구 과제 주관 기관 : 서울시립대학교

참고문헌

  1. 강민수(1998), 영향인자를 고려한 연직배수재기술의 개발에 관한 연구, 박사학위논문, 중앙대학교, pp. 60-87.
  2. 권오일(2007), 좌굴을 고려한 연직배수재의 통수능 특성 연구, 석사학위논문, 서울시립대학교, pp, 26-46.
  3. 김서룡(2005), 복합 통수능 시험에 의한 연직배수재 특성, 석사학위 논문, 충북대학교, pp. 32-58.
  4. 김찬기(2004), 복합 통수능 시험에 의한 배수재의 통수 특성에 관한 연구, 대진대학교 대진논총, Vol. 11, pp. 85-101.
  5. 박만규(2003), 연직배수재의 통수특성에 관한 비교연구, 석사학위 논문, 대진대학교, pp. 23-53.
  6. 박영목(1996), 국내 PBD재의 배수성능과 진공효과에 의한 통수능력 향상에 관한 연구, 봄 학술발표대회 논문집, 한국지반공학회, pp. 39-52.
  7. 양상호(2003), 연직배수재의 현장조건을 고려한 통수능력 실험기의 개발과 적용, 석사학위논문, 한양대학교, pp. 45-133.
  8. 이승재(2003), 배수재 설치 방식이 스미어 효과에 미치는 영향, 석사학위논문, 단국대학교, pp. 40-62.
  9. 장제원(2005), 연직배수재 통수능 및 Smear Effect 영향에 관한 연구, 석사학위 논문, 고려대학교, pp. 60-82.
  10. ASTM D 4716-01(2001), Test Method for Determining the (in Plane) Flow Rate Per Unit Width and Hydraulic Transmissivity of Geosynthetic Using a Constant Head. Annual Book of ASTM Standards, American Society for Testing Materials, Vol. 04.09-(II), pp. 1054-1062.
  11. Den Hoedt, G.(1981), Laboratory Testing of Vertical Drains, Proceedings of 10th International Conference on Soil Mechanics and Foundation Engineering, Stockholm, Vol. 1, pp. 627-630.
  12. Koerner, C. M. and Lawrence, C. A.(1988), Flow Behavior of Kinked Strip Drains, Proceedings of ASCE Symposium on Geosynthetics for Soil Improvement, Nashville, Tenn., Geotechnical Special Publication, No. 18, pp. 22-35.
  13. Oostveen, J.P. and Troost, G.H.(1990), Dicharge Index Tests on Vertical Drains. Geotextiles, Geomembranes and Related Products, pp. 345-350.
  14. Suits, L. D., Gemme, R. L., and Masi, J. J.(1986), Effectiveness of Prefabricated Drains on Laboratory Consolidation of Remolded Soils. Consolidation of Soils : Testing and Evaluation, American Society for Testing Materials, pp. 663-683.