한국주조공학회지 (Journal of Korea Foundry Society)

  • 제31권5호
  • /
  • Pages.284-287
  • /
  • 2011
  • /
  • 1598-706X(pISSN)
  • /
  • 2288-8381(eISSN)
한국주조공학회 (Korea Foundry Society)
권호 표지
DOI QR코드

DOI QR Code

Effect of Sr Substitution for RE on Microstructure and Tensile Properties in Mg-Al-RE Casting Alloys

  • Jun, Joong-Hwan (Advanced Fusion Process R&D Group, Korea Institute of Industrial Technology)
  • 투고 : 2011.08.22
  • 심사 : 2011.09.26
  • 발행 : 2011.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 Mg-Al 합금에 첨가된 희토류 금속(rare earth metal, RE)과 스트론튬(Sr)이 상온 및 고온 기계적 특성에 미치는 영향을 비교하고, 그 결과를 미세조직의 변화와 연관지어 분석하는 것이 목적이다. 이를 위해 4종의 Mg-6%Al-(3-X)%REX% Sr 합금(X = 0~3)을 마련하여 RE를 Sr으로 대체하면서 상온 및 고온 인장 특성, 크립 저항성을 평가하였다. RE가 Sr으로 대체됨에 따라, 층상구조의(${\alpha}$ + $Al_4Sr$)상이 ${\alpha}$ 덴드라이트 사이에 생성되면서 침상의 $Al_4RE$상이 점차 소멸하였으며 Mg-6%Al-3%Sr 합금에서는(${\alpha}$ + $Al_4Sr$과 블록형태의 Mg-Al-Sr상이 관찰되었다. Sr 함량이 증가할수록 항복강도와 크립저항성은 지속적으로 향상되는 경향을 나타내었다.

Microstructures and tensile properties at ambient and elevated temperatures were studied by substituting RE for Sr in Mg-6%Al-(3-X)%RE-X%Sr alloys (X = 0~3). With increasing Sr content, $Al_4Sr$ phase with lamellar morphology was newly introduced at interdendritic regions, with a gradual extinction of needle-shaped $Al_4RE$. The Mg-6%Al-3%Sr alloy shows dendritic grains and interdendritic eutectic phases containing bulky Mg-Al-Sr and lamellar $Al_4Sr$ with more continuous manner. The substitution of Sr for RE provided higher YS, UTS and creep resistance at $175^{\circ}C$, which indicates that Sr would be more beneficial in tensile properties and creep resistance at elevated temperature than RE for the Mg-Al based casting alloys.

키워드

참고문헌

  1. B. L. Mordike and T. Ebert : Mater. Sci. Eng. A, "Magnesium: Properties-applications-potential", 302 (2001) 37-45 https://doi.org/10.1016/S0921-5093(00)01351-4
  2. H. Friedrich and S. Schumann : J. Mater. Proc. Tech., "Research for a "new age of magnesium" in the automotive industry", 117 (2001) 276-281 https://doi.org/10.1016/S0924-0136(01)00780-4
  3. A. Luo : Int. Mater. Rev., "Recent magnesium alloy development for elevated temperature applications", 49 (2004) 13-30 https://doi.org/10.1179/095066004225010497
  4. B. L. Mordike : Mater. Sci. Eng. A, "Creep-resistant magnesium alloys", 324 (2002) 103-112 https://doi.org/10.1016/S0921-5093(01)01290-4
  5. A. Srinivasan, J. Swaminathan, M. K. Gunjan, U. T. S. Pillai and B. C. Pai : Mater. Sci. Eng. A, "Effect of intermetallic phases on the creep behavior of AZ91 magnesium alloy", 527 (2010) 1395-1403 https://doi.org/10.1016/j.msea.2009.10.008
  6. M. O. Pekguleryuz and A. A. Kaya : Adv. Eng. Mater., "Creep resistant magnesium alloys for powertrain applications", 5 (2003) 866-878 https://doi.org/10.1002/adem.200300403
  7. F. Khomamizadeh, B. Nami and S. Khoshkhooei : Metall. Mater. Trans. A, "Effect of rare-earth element additions on high temperature mechanical properties of AZ91 magnesium alloy", 36 (2005) 3489-3494 https://doi.org/10.1007/s11661-005-0022-6
  8. B. Jing, S. Yangshan, X. Shan, X. Feng and Z. Tianbai : Mater. Sci. Eng. A, "Microstructure and tensile creep behavior of Mg- 4Al based magnesium alloys with alkaline-earth elements Sr and Ca additions", 419 (2006) 181-188 https://doi.org/10.1016/j.msea.2005.12.017
  9. M. Kunst, A. Fischersworring-Bunk, G. L'esperance, P. Plamondon and U. Glatzel : Mater. Sci. Eng. A, "Microstructure and dislocation analysis after creep deformation of die-cast Mg- Al-Sr (AJ) alloy", 510-511 (2009) 387-392 https://doi.org/10.1016/j.msea.2008.07.078
  10. Y. Lu, Q. Wang, X. Zeng, W. Ding, C. Zhai and Y. Zhu : Mater. Sci. Eng. A, "Effects of rare earths on the microstructure, properties and fracture behavior of Mg-Al alloys", 278 (1999) 66-76
  11. S. M. Zhu, M. A. Gibson, J. F. Nie, M. A. Easton and T. B. Abbott : Scripta Mater., "Microstructural analysis of the creep resistance of die-cast Mg-4Al-2RE alloy", 58 (2008) 477-480 https://doi.org/10.1016/j.scriptamat.2007.10.041
  12. T. Sato and M. V. Kral " Mater. Sci. Eng. A, "Microstructural evolution of Mg-Al-Ca-Sr alloy during creep", 298 (2008) 369- 376
  13. G. Pettersen, H. Westengen, R. Hoier and O. Lohne : Mater. Sci. Eng. A, "Microstructure of a pressure die cast magnesium- 4wt.% aluminum alloy modified with rare earth additions", 207 (1996) 115-120 https://doi.org/10.1016/0921-5093(95)10035-0
  14. H. Okamoto : ASM International, Phase Diagrams for Binary Alloys, (2000) 28
  15. H. Okamoto : ASM International, Phase Diagrams for Binary Alloys, (2000) 44