Abstract
This paper presents the method of improving the data rate and BER in the inductive coupling link using a BPM signaling method. A complementary switching transmitter is used to remove invalid glitches at transmitted data, and the concept of pre-distortion is introduced to optimize received data. Also, an integrating receiver is used to increase the sampling margin and equalizing transistors are added in the pre-charge path of the integrator and comparator for high frequency operation. The transceiver designed with a 0.13 um CMOS technology operates at 2.4 Gb/s and consumes 5.99 mW from 1.2 V power supply.
본 논문은 BPM 방식의 신호전송을 하는 인덕티브 커플링 링크에서 전송속도를 증가시키고 BER를 개선하는 방법에 대하여 기술하였다. 데이터가 전송될 때 발생하는 불필요한 glitch를 제거하기 위해 상보적으로 스위칭하는 송신기를 사용하였고, 수신된 데이터의 최적화를 위해 pre-distortion 개념을 도입하였다. 또한 고속 동작에서 샘플링 가능구간을 확보하기 위해 적분형 수신기를 사용하였고, 빠른 pre-charge를 위해 수신기 내부의 적분기와 비교기의 pre-charge 경로에 이퀄라이징 트랜지스터를 추가하였다. 0.13 um CMOS 공정을 사용하여 설계한 송수신회로는 1.2 V 인가전압에서 2.4 Gb/s의 전송속도를 가질 때 약 5.99 mW의 전력소모를 가진다.