Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Deformation Analysis for Dust Cap of Automotive Wheel Bearing

자동차용 휠 베어링의 Dust Cap 변형 해석

  • 이승표 ((주)일진글로벌 기술연구소) ;
  • 이인하 ((주)일진글로벌 기술연구소) ;
  • 김봉철 ((주)일진글로벌 기술연구소) ;
  • 진성규 ((주)일진글로벌 기술연구소)
  • Received : 2011.04.07
  • Accepted : 2011.05.27
  • Published : 2011.10.15
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, deformation of dust cap in the automotive wheel bearing produced during press-fit process was numerically analyzed. The commercial software, MSC.MARC which is based on the finite element method was used to calculate the deformation. From those results, interference between dust cap and sensor was investigated. To verify the analysis results, experiments were performed and compared experiment results with analysis results. To avoid the interference between dust cap and sensor, 4 modified designs were proposed and the best design was derived from them.

Keywords

References

  1. Hofmann, H., and Tröster, M., 1988, "Progress with Car Wheel Bearing Units," Ball and Roller Bearing Engineering - Industrial Engineering published by FAG, Vol. 27, No. 2, pp. 13-15.
  2. Hofmann, H., and Bayer, O., 1990, "ABS Wheel Bearing," Ball and Roller Bearing Engineering - Industrial Engineering published by FAG, Vol. 501, pp. 19-24.
  3. Ouchi, H., 1996, "Hub Unit Bearing with Annular Passive Sensor," NSK Technical Journal, No. 662, pp. 1-7.
  4. Yoon, K. C., and Choi, D. H., 2000, "A Design of an Automotive Wheel Bearing Unit for Long Life," Transactions of the Korean Society of Mechanical Engineers, Vol. 24, No. 2, pp. 319-328.
  5. Ahn, T. K., and Lee, S. H., 2003, "Design of a Wheel Bearing Unit Using Taguchi Method," Journal of the Korean Society of Precision Engineering, Vol. 20, No. 10, pp. 164-168.
  6. Lee, S. P., Lee, I. H., Park, J. S., Hwang, S. H., and Park, J. Y., 2010, "Deformation Analysis for Dust Cap of Wheel Bearing," Proceedings of the Korean Society of Machine Tool Engineering spring conference, p. 60.
  7. MARC, 2008, Volume B: Element Library Manual Version 2008 r1, MSC.Software Corporation.
  8. I-DEAS, 2008, Finite Element Modeling User's Guide Version NX 6, Siemens Product Lifecycle Management Software Inc.
  9. Lee, S. P., Lee, I. H., Cho, Y. G., Kim, B. C., and Koo, M. H., 2010, "Stress Analysis of Automotive Wheel Bearing Considering the Heat Treatment," Proceedings of the Korean Society of Precision Engineering spring conference, pp. 923-924.
  10. Lee, S. P., and Koh, B. K., 2007, "Stability Analysis of Turbo Compressor Rotor Considering the Contact Phenomena," Transactions of the Korean Society of Machine Tool Engineers, Vol. 16, No. 3, pp. 75-80.