Progress in Superconductivity and Cryogenics (한국초전도ㆍ저온공학회논문지)

The Korean Society of Superconductivity and Cryogenics (한국초전도저온학회)
권호 표지
DOI QR코드

DOI QR Code

Properties of a HTS magnet consisting of pancake windings by using the E-J method

  • Received : 2011.10.25
  • Accepted : 2011.11.23
  • Published : 2011.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

In a High temperature superconducting (HTS) tape with high aspect ratio, the magnetic field applied to the HTS tape can be different considerably within the HTS tape. The current distribution in the HTS tape is generally non-uniform because the current distribution is strongly dependent on the applied magnetic field. Non-uniform current distribution in a HTS tape has not been properly considered when the critical current has been estimated. This paper shows the calculation of critical current of a HTS magnet consisting of pancake windings. Non-uniform distribution of current in the HTS tape is considered during the calculation of the critical current. Results of calculation show the current concentrated in the middle part of the HTS tape which is used for one pancake winding.

Keywords

References

  1. K. Shikimachi et al., "Development of MVA class HTS SMES system for bridging instantaneous voltage dips," IEEE Trans. Appl. Supercond., vol.15, pp. 1931-1934, 2005. https://doi.org/10.1109/TASC.2005.849338
  2. T. Kiyoshi et al., "Operation of a 930-MHz high-resolution NMR magnet at TML," IEEE Trans. Appl. Supercond., vol.15, pp. 1330-1333, 2005. https://doi.org/10.1109/TASC.2005.849585
  3. M. Sekino et al., "Fabrication of an MRI Model Magnet With an Off-Centered Distribution of Homogeneous Magnetic Field Zone," IEEE Trans. Appl. Supercond., vol.20, pp. 781-785, 2010. https://doi.org/10.1109/TASC.2010.2040608
  4. A. Miyazoe et al., "Current distribution in coated conductor under external magnetic field up to 5T," IEEE Trans. Appl. Supercond., vol.21, pp. 1600-1603, 2011. https://doi.org/10.1109/TASC.2010.2093102
  5. Y. Adanny et al., "Calculated E-I characteristics of HTS pancakes and coils exposed to inhomogeneous magnetic fields," J. Phys.: Conf., Ser. 43, pp. 1068-1071, 2006.
  6. Y. Kim et al., "Properties of High Temperature Superconducting Magnet With Optimized Air Gap Between Pancake Windings," IEEE Trans. Appl. Supercond., vol.21, no.3, pp.2267-2270, 2011. https://doi.org/10.1109/TASC.2010.2089034
  7. J. Zhang et al., "The Electromagnetic Analysis and Structural Design of a 1 MJ HTS Magnet for SMES," IEEE Trans. Appl. Supercond., vol. 21, pp. 1344-1347, 2011. https://doi.org/10.1109/TASC.2010.2098010