참고문헌
- B. L. Mordike, T. Ebert, 2001, Magnesium Properties-applications-potential, Mater. Sci. Eng. A, Vol. 302,No. 1 pp. 37-45. https://doi.org/10.1016/S0921-5093(00)01351-4
- M. T. Perez-Prado, 2002, Texture Evolution during Annealing of Magnesium AZ31 Alloy, Scr. Mater., Vol. 46, No. 2, pp. 149-155. https://doi.org/10.1016/S1359-6462(01)01212-X
- H. Takuda, T. Enami, K. Kubota, 2000, The Formability of a Thin Sheet of Mg 8.5 Li 1Zn Alloy, J. Mater. Process Technol., Vol. 101, No. 1-3, pp. 281-286. https://doi.org/10.1016/S0924-0136(00)00484-2
- Y. Z. Lu, Q. D. Wang, W. J. Ding, 2000, Fracture Behavior of AZ91 Magnesium Alloy, Mater. Lett., Vol. 44, No. 4, pp. 265-268. https://doi.org/10.1016/S0167-577X(00)00041-0
- N. Ogawa, M. Shiomi, K. Osakada, 2002, Forming Limit of Magnesium Alloy at Elevated Temperatures for Precision Forging, Int. J. Mach. Tools Manuf., Vol. 42, No. 5, pp. 607-614. https://doi.org/10.1016/S0890-6955(01)00149-3
- J. T. Carter, P. E. Krajewski, 2008, The Hot blow Forming of AZ31 Mg Sheet: Formability Assessment and Application Development, JOM, Vol. 60 No. 11, pp. 77-81. https://doi.org/10.1007/s11837-008-0153-5
- M. K. Khraisheh, F. K. Abu-Farha, 2006, Combined Mechanics-materials Based Optimization of Superplastic Forming of Magnesium AZ31 Alloy, CIRP Ann. Manuf. Technol., Vol. 55, No. 1, pp. 233-236. https://doi.org/10.1016/S0007-8506(07)60405-3
- Gouthama, K. A. Padmanabhan, 2003, Transmission Electron Microscopic Evidence for Cavity Nucleation during Superplastic Flow, Scr. Mater., Vol. 49, No. 8, pp. 761-766. https://doi.org/10.1016/S1359-6462(03)00427-5
- D. L. Yin, K. F. Zhang, G. F. Wang, 2005, Superplasticity and Cavitation in AZ31 Mg Alloy at Elevated Temperatures, Mater. Lett., Vol. 59, No. 14-15, pp. 1714-1718. https://doi.org/10.1016/j.matlet.2005.01.053
- K. K. Chow, K. C. Chan, 2002, Effect of Stress State on Cavitation and Hot Forming Limits of a Coarse-Grained Al5052 Alloy, Mater. Lett., Vol. 52, No. 1-2, pp. 62-68. https://doi.org/10.1016/S0167-577X(01)00367-6
- K. C. Chan, K. K. Chow, 2002, The Stress State Dependence of Cavitation in Commercial Superplastic Al5083 Alloy, Mater. Lett., Vol. 56, No. 1-2, pp. 38-42. https://doi.org/10.1016/S0167-577X(02)00413-5
- A. C. F. Cocks, M. F. Asyby, 1982, On Creep Fracture by Void Growth, Prog. Mater Sci., Vol. 27, No. 3-4, pp. 244-244.
- J. Pilling, R. Raj, 1985, Effect of Hydrostatic Pressure on Cavitation in Superplastic Aluminium Alloys, Acta Metall., Vol. 34, No. 4, pp. 669-679.
- A. H. Chokshi, Amiya K. Mukherjee, 1993, The Influence of Hydrostatic Pressure on Grain Boundary Sliding in Superplasticity: Implications for Cavitation, Mater. Sci. Eng. A, Vol. 171, No. 1-2, pp. 47-54. https://doi.org/10.1016/0921-5093(93)90391-Q
- H. S. Yang, H. K. Ahmed, W. T. Robert, 1989, Process Control of Superplastic Forming under Superimposed Hydrostatic Pressure, Mater. Sci. Eng. A, Vol. 122, No. 2, pp. 193-203. https://doi.org/10.1016/0921-5093(89)90630-8
- A. K. Ghosh, C. H. Hamilton, 1982, Influences of Material Parameter and Microstructure on Superplastic Forming, Mater. Sci., Vol. 13, No. 5, pp. 733-743.