참고문헌
- J. Y. Jeng, M. C. Lin, 2001, Mold Fabrication and Modification using Hybrid Processes of Selective Laser Cladding and Milling, J. Mater. Process. Technol., Vol. 110, No. 1, pp. 98-103. https://doi.org/10.1016/S0924-0136(00)00850-5
- B. D. Joo, J. H. Jang, H. S. Yim, Y. M. Son, Y. H. Moon, 2009, Effect of Process Parameters on Forming Characteristics of Selective Laser Sintered Fe-Ni-Cr Powder, Trans. Mater. Process., Vol. 18, No. 3, pp. 262-267. https://doi.org/10.5228/KSPP.2009.18.3.262
- M. D. Montasser, J. K. Lim, K. W. Dalgarno, 2008, A Comparison between Direct and Indirect Laser Sintering of Metals, J. Mater. Sci. Technol., Vol. 24, No. 2, pp 227-232.
- F. Abe, K. Osakada, M. Shiomi, K. Uematsu, M. Matsumo, 2001, The manufacturing of hard tools from metallic powders by selective laser melting, J. Mater. Process. Technol., Vol. 111, No. 1, pp. 210-213. https://doi.org/10.1016/S0924-0136(01)00522-2
- Y. Ning, Y. S. Wong, J. Y. H. Fuh, H. T. Loh, 2006, An Approach to Minimize Building Errors in Direct Metal Laser Sintering, IEEE Trans. Autom. Sci. Eng., Vol. 3, No. 1, pp. 73-80. https://doi.org/10.1109/TASE.2005.857656
- I. Yadroitsev, I. Smurov, 2010, Selective Laser Melting Technology : From the Single Laser Melted Track Stability to 3D Parts of Complex Shape, Physics Procedia, Vol. 5, Part B, pp. 551-560. https://doi.org/10.1016/j.phpro.2010.08.083
- A. Simchi, 2006, Direct Laser Sintering of Metal Powder: Mechanism, Kinetics and Microstructural Features, Mater. Sci. Eng. A, Vol. 428, No. 1-2, pp. 148-158. https://doi.org/10.1016/j.msea.2006.04.117
- P. Fisher, H. Leber, V. Romano, H. P. Karapatis, C. Andre, R. Glardon, 2004, Microstructure of Nearinfrared Pulsed Laser Sintered Titanium Samples, Appl. Phys. A, Vol. 78, No. 8, pp. 1219-1227. https://doi.org/10.1007/s00339-003-2205-6
- M. Y. Sung, B. D. Joo, S. H. Kim, Y. H. Moon, 2010, Process Analysis of Melting Behaviors in Selective Laser Melting Process, Trans. Mater. Process., Vol. 19, No. 8, pp. 517-522. https://doi.org/10.5228/KSTP.2010.19.8.517
- J. P. Kruth, L. Froyen, J. Van Vaerenbergh, P. Mercelis, M. Rombouts, B. Lauwers, 2004, Selective Laser Melting of Iron-based Powder, J. Mater. Process. Technol., Vol. 149, No. 1-3, pp. 616-622. https://doi.org/10.1016/j.jmatprotec.2003.11.051
- R. Mogan, C. J. Sutcliffe, W. o'neill, 2004, Density Analysis of Direct Metal Laser Re-melted 316L Stainless Steel Cubic Primitives, J. Mater. Sci., Vol. 39, No. 4, pp. 1195-1205. https://doi.org/10.1023/B:JMSC.0000013875.62536.fa
- S. Balaji, A. Upadhyaya, 2007, Electrochemical Behavior of Sintered YAG Dispersed 316L Stainless Steel Composites, Mater. Chem. Phys., Vol. 101, No. 2-3, pp. 310-316. https://doi.org/10.1016/j.matchemphys.2006.06.002
- Y. W. Mo, Y. T. Yoo, B. H. Shin, H. J. Shin, 2006, Welding Characteristics on Heat Input Changing of Laser Dissimilar Metals Welding, Trans. Kor. Soc. Mach. Tool Eng., Vol. 15, No. 2, pp. 51-58.
피인용 문헌
- The Effect of Shielding Gas on Forming Characteristics for Direct Laser Melting vol.22, pp.6, 2013, https://doi.org/10.5228/KSTP.2013.22.6.334
- Effect of Powder Morphology on the Deposition Quality for Direct Laser Melting vol.25, pp.3, 2016, https://doi.org/10.5228/KSTP.2016.25.3.195