참고문헌
- R. M. Lyengar, B. Fedewa, 2008, Implication of Hot-stamped Boron Steel Components in Automotive Structure, SAE Paper, No. 2008-01-0857.
- Z. W. Xinga, J. Bao, Y. Y. Yang, 2009, Numercial Simulation of Hot Stamping of Quenchable Boron Steel, Mater. Sci. Eng. A, Vol. 499, pp. 28-31. https://doi.org/10.1016/j.msea.2007.09.102
- S. H. Yoon, J. H. Lee, K. M. Lee, 2001, A study on the Fatigue Properties of Boron Steel(AISI 51B20), Proc. Kor. Soc. Precis. Eng., Vol. 18, No. 11, pp. 174-178.
- H. S. Choi, B. M. Kim, K. H. Park, W.S.Lim, S.B. Lee, 2010, Optimization of Resistance Spot Weld Condition for Single Lap Joint of Hot Stamped 22MnB5 by Taking Heating Temperature and Heating Time into Consideration, Trans. Kor. Soc. Mech. Eng., Vol. 34, No. 10, pp. 1367-1375. https://doi.org/10.3795/KSME-A.2010.34.10.1367
- H. I. Jae, C. S. Son, K. W. Nam, 2011, A Study on Spot-Welding Characteristics and Material Analysis of Boron Steel for Hot-Stamping under Different Heat-Treatment Conditions, Kor. Soc. Mech. Eng, Vol. 35, No. 4, pp. 383-391. https://doi.org/10.3795/KSME-A.2011.35.4.383
- R. Sharma, P. Molian, F. Peters, 2010, Geometric Variability and Surface Finish of Weld Zones in Yb:YAG Laser Welded Advanced High Strength Steels, J. Manuf. Processes, Vol. 12, No. 2, pp. 73-84. https://doi.org/10.1016/j.jmapro.2010.05.001
- R. Padmanabhan, A. J. Baptista, M. C. Oliveria, L. F. Menezes, 2007, Effect of Anisotropy on Deepdrawing of Mild Steel and Dual-phase Steel Tailorwelded Blanks, J. Mater. Process. Technol., Vol. 184, No. 1-3, pp. 288-293. https://doi.org/10.1016/j.jmatprotec.2006.11.051
- D. Nand, D. L. Chen, S. D. Bhole, P. Andreychuk, G. Boudreau, 2006, Fatigue Behavior of Tailor (Laser)-Welded Blanks for Automotive ApplicatiAons, Mater. Sci. Eng. A, Vol. 420, pp. 199-207. https://doi.org/10.1016/j.msea.2006.01.075
- H. S. Choi, B. M. Kim, G. H. Park, W. S. Lim, 2010, Optimization of Resistance Spot Weld Condition for Single Joint Hot Stamped 22MnB5 by Taking Heating Temperate and Heating Time Into Consideration, Kor. Soc. Mech. Eng. A, Vol. 34, No.10, pp. 1367-1375. https://doi.org/10.3795/KSME-A.2010.34.10.1367
- J. K. Choi, J. G. Kim, S. M. Shin, C. H. Kim, S. H. Rhee, 2010, A study on Laser Welding caracteristics of 1500MPa Grade Ultra High Strength Steel for Automotive Application, J. Kor. Soc. Las. Pro., Vol. 13, No. 3, pp. 19-26.
- Y. G. An, C. Y. Kang, Y. S. Kim, C. H. Kim, T. K. Han, 2011, Microstructure and Hardness of DISK laser Welded in Al-Si Coated Boron Steel and Zn Coated DP Stee, J. Kor. Weld. Join. Soc., Vol. 29, No. 1, pp. 90-98. https://doi.org/10.5781/KWJS.2011.29.1.090
- J. H. Kim, W. O. Lee, K. H. Chung, D. Y. Kim, C. M. Kim, K. Okamoto, R. H. Wagoner, K. S. Chung, 2011, Springback Evaluation of Friction Stir Welded TWB Automotive Sheets, Met. Mater. Int., Vol. 17, No. 1, pp. 89-98.
- ASTM E 8M-01, Standard Test Methods for Tension Testing of Metallic Material.
피인용 문헌
- A Study on Laser Weldability of Al-Si Coated 22MnB5 Steel for TWB Hot Stamping vol.31, pp.2, 2013, https://doi.org/10.5781/KWJS.2013.31.2.30