참고문헌
- M. Kaelin, D. Rudmann, F. Kurdesau, T. Meyer, H.Zogg and A. N. Tiwari: Thin Solid Films, 431 (2003) 58. https://doi.org/10.1016/S0040-6090(03)00194-9
- M. Nouiri, Z. B. Ayadi, K. Khirouni, S. Alaya, K. Djessas and S. Yapi: Mater. Sci. Eng. C, 27 (2007) 1002. https://doi.org/10.1016/j.msec.2006.07.022
- K. Sakurai, R. Hunger, N. Tsuchimochi, T. Baba, K. Matsubara, P. Fons, A. Yamada, T. Kojima, T. Deguchi, H. Nadanishi and S. Niki: Thin Solid Films, 431 (2003) 6. https://doi.org/10.1016/S0040-6090(03)00226-8
- T. Nakano, T. Suzuki, N. Ohnuki and S. Baba: Thin Solid Films, 334 (1998) 192. https://doi.org/10.1016/S0040-6090(98)01142-0
- J. W. Lim, J. W. Bae, Y. F. Zhu, S. Lee, K. Mimura and M. Isshiki: Surf. Coat. Technol., 201 (2006) 1899. https://doi.org/10.1016/j.surfcoat.2006.01.009
- J. Sarkar, P. McDonald and P. Gilman: Thin Solid Films, 517 (2009)1970. https://doi.org/10.1016/j.tsf.2008.10.065
- K. S. Cho, I. B. Song, M. H. Chang, J. H. Yun, M. H. Oh, J. K. Hong and N. K. Park: J. Korean Powder Metall Inst., 17 (2010) 365. https://doi.org/10.4150/KPMI.2010.17.5.365
- G. Bertrand, S. Deleonibus, B. Previtali, G. Guegan, X. Jehl, M. Sanquer and F. Balestra: Solid-State Electron, 48 (2004) 505. https://doi.org/10.1016/j.sse.2003.09.026
- M. Moriyama, T. Morita, S. Tsukimoto, M. Shimada and M. Murakami: Mater. Trans., 46 (2005) 1036 . https://doi.org/10.2320/matertrans.46.1036
- K. J. Kardokus, C. T. Wu, Parfeniuk, L Chrstopher and E. B. Jane: U.S. Patent 6, 645,427. Nov. 11, 2003 "Copper Sputtering Target Assembly and Method of Making same".
- C. F. Lo, P. Mcdonald, D. Draper and P. Gilman: J. Eelectro. Mater., 34 (2005) 1468. https://doi.org/10.1007/s11664-005-0152-z
- H. Thomasv and V. Steenkiste: Key Engineering Materials., 197 (2001) 59. https://doi.org/10.4028/www.scientific.net/KEM.197.59
- J. H. Cho, Y. M. Jin, D. Y. Park, H. J. Kim, I. H. Oh and K. A. Lee: Met. Mater. Int., 17 (2011) 157. https://doi.org/10.1007/s12540-011-0222-0
- Y. M. Jin, J. H. Cho, D. Y. Park, J. H. Kim and K. A. Lee: J. Therm. Spray Techn., 20 (2011) 497. https://doi.org/10.1007/s11666-010-9552-6
- Y. M. Jin, D. Y. Park, H. J. Kim, I. H. Oh and K. A. Lee: Met. Mater. Int., in press.
- S. H. Kwon, D. Y. Park, H. J. Kim and K. A. Lee: J. Kor. Inst. Met. & Mater., 45 (2007) 216.
- W. Kroemmer, P. Heinrich and P. Richter: Thermal Spray 2003, B. R. Marple and C. Moreau: Ed., ASM International, Orlando, FL, USA, (2003) 97.
- J. Haynes and J. Karthikeyan: Thermal Spray 2003, B. R. Marple and C. Moreau: Ed., ASM International, Orlando, FL, USA, (2003) 97.
- S. H. Chang, J. C. Choi, S. W. Choi and I. H. Oh: Kor. J. Mater. Res., 18 (2008) 181. https://doi.org/10.3740/MRSK.2008.18.4.181
- B. Gabbitas, P. Cao, S. Raynova and D. L. Zhang: Maters. Sci. Forum., 534 (2007) 805.
- T. Stoltenhoff, C. Borchers, F. Grtner and H. Kreye: Surf. Coat. Tech., 200 (2006) 4947. https://doi.org/10.1016/j.surfcoat.2005.05.011
- W. L. Li, C. J. Li and H. L. Liao: J. Therm. Spray. Techn., 15 (2006) 1059.
- S. J. Hong and C. Suryanarayana: J. Applied Physics., 96 (2004) 6120. https://doi.org/10.1063/1.1808243
피인용 문헌
- Effect of Heat Treatment Environment on the Densification of Cold Sprayed Ti Coating Layer vol.19, pp.2, 2012, https://doi.org/10.4150/KPMI.2012.19.2.110
- Manufacturing and Properties of CGI-based Composite Coating Layer Utilizing a Warm Spray Process and Cu-Ga and Cu-In Mixed Powders vol.21, pp.3, 2014, https://doi.org/10.4150/KPMI.2014.21.3.229
- Manufacturing of Cu Repair Coating Material Using the Kinetic Spray Process and Changes in the Microstructures and Properties by Heat Treatment vol.21, pp.5, 2014, https://doi.org/10.4150/KPMI.2014.21.5.349
- Effect of Hot Isostatic Pressing on the Microstructure and Propertiesof Kinetic Sprayed Nb Coating Material vol.23, pp.1, 2016, https://doi.org/10.4150/KPMI.2016.23.1.15
- Fabrication and Microstructure/Properties of Bulk-typeTantalum Material by a Kinetic Spray Process vol.23, pp.1, 2016, https://doi.org/10.4150/KPMI.2016.23.1.8