DOI QR코드

DOI QR Code

Comparative Study for Grinding of Two Cement Clinkers

  • Ibrahimi, Soumaya (Environment Catalyses and Analyzes of Processes Unit Research, National School of Engineering of Gabes, University of Gabes) ;
  • Jamaa, Nejib Ben (Environment Catalyses and Analyzes of Processes Unit Research, National School of Engineering of Gabes, University of Gabes) ;
  • Mliki, Khaoula (Environment Catalyses and Analyzes of Processes Unit Research, National School of Engineering of Gabes, University of Gabes) ;
  • Bagane, Mohamed (Applied Thermodynamics Unit Research)
  • 투고 : 2011.05.30
  • 심사 : 2011.08.26
  • 발행 : 2011.12.30

초록

The purpose of this work is the comparative study for grinding of two cement clinkers. X-ray fluorescence, physical and granulometric tests and optical microscopy were used to characterize the clinkers. Also grinding tests were carried out for ten samples to determine the parameters influencing grindability of its clinkers. The results of calculation of the energies of grinding according to the law developed by Von Rittinger and the study of the microstructure of the two clinkers shows good agreements. Indeed, frequent clusters of belite which indicate a lack of uniformity and fineness have an effect on lowering the grindability. The obtained analyses and the results enabled us to interpret the granulometry and the microstructure of clinker to control quality and resistance.

키워드

참고문헌

  1. Seebach MV., Schneider L., Update on finish grinding with improved energy efficiency. World Cem., Vol. 17, No. 8, 1986, pp. 336-46.
  2. Rhodes M., Introduction to Particels Technology, John Wiley & Sons, Brisbane, 1998.
  3. De Souza V.C.G., Koppe J. C., Costa J.F.C.L., Vargas A.L.M., Blando E., Hübler R., The influence of mineralogical, chemical and physical properties on grindability of commercial clinkers with high MgO level. Cement and Concrete Research, 38, 2008, pp. 1119-1125. https://doi.org/10.1016/j.cemconres.2008.02.011
  4. Donald H. Campbell, Microscopical Examination and Interpretation of Portland Cement and Clinker, Portland Cement Association, Second Edition, SP030, 30-128, 1999.
  5. Ben Jamaa N. and Maki I, Characterization of Tunisian Portland cement clinkers by optical microscopy, SEM and microprobe analysis, Ann. Chim. Sci. Mat., Vol. 31, No. 4, 2006, pp. 421-430. https://doi.org/10.3166/acsm.31.421-430
  6. Maki I. Processing conditions of Portland cement clinker as viewed from the fine textures of the constituent minerals. Am. Ceram. Soc., 40, Ceramic transactions, 1994, pp. 3-17.
  7. Maki I., Some characteristic microscopic textures of the Portland cement constituent minerals and the processing conditions in the kiln, Proc. 23rd Int. Conf. Cement Microscopy 2001.
  8. Hofmanner F., Microstructure of Portland Cement Clinker, Holderbank Management and Consulting, Ltd., Holderbank, Switzerland, 1973.
  9. Tsuboi T., and Ogawa T., Microscopic Studies of Clinker for Evaluating the Sintering Process, Zement-Kalk-Gips, Vol. 25, No. 6, 1972, pp. 292-294.