Abstract
For developing high performance fuel cell, peripheral devices and key components have to be studied in priority. In this study, centrifugal pump was studied for heat recovery. For PEM fuel cell system, a four-impeller centrifugal pump was designed, tested and compared with result of commercial product (IWAKI). In addition, effects of number of impeller were analyzed by CFD. The experiment and analysis were progressed in the same conditions. The results showed the quantitative difference under 30% between the numerical and the experimental pressure difference and mass flow rate.
우수한 성능의 연료전지 시스템을 개발하기 위해서는 연료전지의 주변장치 및 핵심부품을 중점적으로 연구해야 한다. 따라서 본 연구에서는 연료전지 시스템 내에서 배열 회수를 목적으로 사용될 원심펌프에 대해서 연구를 하였다. 본 연구를 위해 임펠러 수가 4개인 원심펌프를 설계, 제작하여 실험을 하였고, 상용모델(IWAKI) 결과와 비교, 분석하였다. 또한 임펠러 수가 4, 6, 8개인 원심펌프를 설계하여 CFD 해석기법을 통해 해석해 보았다. 실험결과와 전산해석은 동일한 조건하에 진행 되었으며 정량적인 차이를 비교 하였을 경우 30[%] 이내의 차이를 보여주었다. 또한 실험을 통해 얻어진 결과는 전산해석을 수행하는데 중요한 자료로 사용될 수 있었고 향후, 실험에 대한 정확성 향상 및 CFD 해석에서 가정한 부분을 줄인다면 더 정확한 결과를 확보할 수 있을 것이다.