Transactions of the Korean Society of Pressure Vessels and Piping (한국압력기기공학회 논문집)
- Volume 7 Issue 3
- /
- Pages.61-66
- /
- 2011
- /
- 1738-8333(pISSN)
DOI QR Code
Development of ETSS for the SG Secondary Side Loose Part Signal Detection and Characterization
SG전열관 2차측 이물질 검출 및 특성분석을 위한 ETSS 개발
- Received : 2011.08.05
- Accepted : 2011.08.14
- Published : 2011.09.01
Abstract
The integrity of the SG(Steam Generator) tubes has been challenged by numerous factors such as flaws, operation, atmosphere, inherently degraded materials, loose parts and even human errors. Of the factors, loose parts(or foreign materials) on the secondary side of the tubes can bring about volumetric defects and even leakage from the primary to the secondary side in a short period of time. More serious concerns about the loose parts are their unknown influx path and rapid growth rate of the defects affected by the loose parts. Therefore it is imperative to detect and characterize the foreign materials and the defects. As a part of the measures for loose part detection, TTS(Top of Tubesheet) MRPC(Motorized Rotating Pancake Coils) ECT has been carried out especially to the restricted high probability area of the loose part. However, in the presence of loose parts in the other areas, wide range loose part detection techniques are required. In this study, loose part standard tube was presented as a way to accurately detect and characterize loose part signals. And the SG tube ECT bobbin coil and MRPC ISI(In-service Inspection) data of domestic OPR-1000 and Westinghouse Model F(W_F) were reviewed and consequently, comprehensive loose part detection technique is derived especially by applying bobbin coil signals
Keywords