Abstract
In this paper, thermal analysis simulation program by taking advantage of COMSOL Multiphysics, LED Module for the production of the most preferred package type, omitting the COH Type COB Type and board simulation of the thermal analysis is in progress. LED Module that passes through the Heat-sink of the simulation results, depending on the location of the COB Type Max. Approximately $78^{\circ}C$ ~ Min. Approximately $62^{\circ}C$, COH Type the Max. Approximately $88^{\circ}C$ ~ Min. Approximately $67^{\circ}C$ has been confirmed that the temperature stability. Compared with COB Type Max. AIthough temperature difference is about $10^{\circ}C$, Min. At a temperature of about $5^{\circ}C$ confirmed to be enough to reduce the gap, LED Point confirming the results of the temperature curves for COB Type Max. Approximately $100^{\circ}C$ ~ Min. Approximately $77^{\circ}C$, COH Type the Max. Approximately $100^{\circ}C$ ~ Min. Approximately $86^{\circ}C$ temperature stability was confirmed that, COB Type COH Type, compared to approximately $10^{\circ}C$ temperature was higher.
본 논문에서는 열 해석 시뮬레이션 프로그램인 COMSOL Multiphysics를 활용하여, LED Module의 제작 시, 가장 선호되는 패키지 종류인 COB Type과 보드를 생략한 COH Type의 열 해석 시뮬레이션을 진행한다. LED Module의 시뮬레이션 결과 방열판을 통과하는 위치에 따라 COB Type은 Max. 약 $78^{\circ}C$ ~ Min. 약 $62^{\circ}C$, COH Type은 Max. 약 $88^{\circ}C$ ~ Min. 약 $67^{\circ}C$에서 온도가 안정이 됨을 확인하였다. COB Type과 비교하여 Max. 온도는 약 $10^{\circ}C$ 차이가 나지만, Min. 온도에서 약 $5^{\circ}C$정도로 격차가 감소함을 확인하였으며, LED Point 온도특성곡선을 확인 한 결과 COB Type은 Max. 약 $100^{\circ}C$ ~ Min. 약 $77^{\circ}C$, COH Type은 Max. 약 $100^{\circ}C$ ~ Min. 약 $86^{\circ}C$온도가 안정이 됨을 확인하였으며, COB Type에 비해 COH Type이 약 $10^{\circ}C$ 온도가 높게 측정되었다.