초록
배수관로 내의 토사퇴적으로 인한 통수능 저하는 도시홍수의 주요 발생 원인으로 배수관로의 효율적 유지관리는 도시홍수 예방에 대단히 중요하다. 따라서 본 연구에서는 만관 원형관로에서의 토사이송 실험을 실시하고 배수관로 내에서 일어나는 유사이송 형태, 흐름의 저항 및 유사량 등 수리학적 특성을 분석함으로써 관로의 효율적 유지관리를 위한 기초 자료를 제시 하였다. 본 실험은 길이 8 m, 관경 60 mm의 수평 관로와 유사 공급장치로 구성된 모형장치을 통하여 실내실험을 수행하였다. 실험장치는 최대 $30m^3/hr$ 규모의 유량 순환시스템을 갖추고 있으며 관로 상류부에 5 g/s~19 g/s 규모의 유사 공급 장치와 함께 관로 끝부분에 유사 회수시스템을 갖추고 있다. 본 연구 수행 결과 통수단면의 평균유속(U), 점성계수(${\mu}$), 단위 폭당 소류사량($q_b$), 평균입경($d_{50}$), 수중유사단위중량(${\gamma}^{\prime}_s$)를 주요 인자로 하는 두 개의 무차원 변수를 이용하여 압력 원형관로 내 토사이송을 예측하는 공식을 제안하였으며 이들 무차원 변수 간에는 선형 상관관계가 있음을 확인하였다.
The low carrying capacity caused by the deposition in a sewer line is one of the main reason of the urban flood. Therefore, an efficient maintenance and management of the storm water drainage system is very important to prevent urban flood. In this research, the sediment transport characteristics through a pressure pipeline were examined with laboratory experiments. Bed-forms in a pipeline, sediment rates, roughness due to sediments were examined. Experimental system consists of flow circulation system with a pump and a sediment feeder at the upstream of the pipeline. Sediments were supplied into a 60 mm-diameter and 8 m-long pipe. Maximum flow rate is $30m^3/hr$, and the sediment feeding rate range is 5 g/s~19 g/s. Governing parameters and estimation equation for sediment transport rate were developed. The mean velocity (U), coefficient of viscosity (${\mu}$), unit width bed load ($q_b$), mean diameter of particle ($d_{50}$), unit weight of sediment in water (${\gamma}^{\prime}_s$) were adopted as the most influencing factors of sediment transport patterns. The prediction equation for sediment transport rate were developed with two dimensionless terms. These two dimensionless terms showed a linear relationship with high correlation coefficient.