DOI QR코드

DOI QR Code

복부 파형강판을 갖는 복합교량의 비틀림 거동에 대한 비선형 해석 모델 개발

Development of Non-linear Analysis Model for Torsional Behavior of Composite Box-Girder with Corrugated Steel Webs

  • 고희중 (고려대학교 건축사회환경공학부) ;
  • 문지호 (Univ. of Washington 토목환경공학과) ;
  • 이학은 (고려대학교 건축사회환경공학부)
  • 투고 : 2010.11.02
  • 심사 : 2011.03.16
  • 발행 : 2011.06.30

초록

복부 파형강판을 갖는 복합교량은 기존 PSC 박스 거더의 콘크리트 복부판을 파형강판으로 대체함으로써 상부구조의 경량화를 유도하고 프리스트레싱 효율성을 향상시킬 수 있어 국외에서 널리 이용되고 있다. 하지만 이러한 장점에도 불구하고 복부 파형강판을 갖는 복합교량은 기존 연구가 거더의 전단과 휨 거동에 국한되어 있어 비틀림 거동에 대한 이해는 부족한 상황이다. 국내외의 연구자들에 의하여 복부 파형강판을 갖는 복합교량의 비선형 해석 방법이 개발되었으나, 이러한 연구는 콘크리트의 인장 강도를 무시하여 균열 모멘트 및 비틀림 강성과 같은 콘크리트 교량의 사용성에 영향을 미치는 요소들에 대한 이해가 부족한 실정이다. 본 논문에서는 콘크리트의 인장 거동을 고려한 복부 파형강판을 갖는 복합교량의 비선형 비틀림 거동 해석 방법에 대한 연구를 수행하였다. 제안된 이론을 적용하여 해석 프로그램을 제작하였으며, 실험 연구를 통하여 개발된 해석 방법의 타당성을 검증하였다. 마지막으로 변수 해석을 실시하여 콘크리트의 인장 강도가 비틀림 거동에 미치는 영향을 분석하였다.

Composite box-girder with corrugated steel webs has been widely used in civil engineering practice as an alternative of conventional pre-stressed concrete box-girder because the efficiency of pre-stressing can be increased and weight reduction of superstructure can be achieved by replacing concrete webs as a corrugated steel webs. However, most of previous researches were limited in shear and flexural behavior of such girder so that the torsional behaviors of composite box-girder with corrugated steel webs are not fully understood yet and it needs to be investigated. Some of previous researchers developed the nonlinear theory for torsional analysis of composite box-girder with corrugated steel webs. However, their theories were developed by ignoring the tensile behavior of concrete. Thus, there are certain limitations in analysis of serviceability such as cracking moment and torsional stiffness of the girder. This paper presents the analytical model for torsional behavior of composite box-girder with corrugated steel webs considering tensile behavior of concrete. Based on the proposed analytical model, nonlinear torsional analysis program of composite box-girder with corrugated steel webs was developed. Then, for verification of validation of the developed model, test for the girder was conducted and the results were compared with those of analytical model. Finally, parametric study was conducted and the effects of tensile behavior of concrete on the torsional behavior of the girder were discussed.

키워드

참고문헌

  1. 길흥배, 이승록, 이학은, 이필구(2003) 제형 파형강판의 전단 거동에 영향을 미치는 기하학적 요소에 대한 연구, 한국강구조학회논문집, 한국강구조학회, 제10권 6호, pp. 501-601.
  2. 문지호, 이승록, 길흥배, 이학은(2004) 제형 파형강판 복부판의 전단 거동에 관한 실험 연구, 대한토목학회논문집, 대한토목학회, 제24권 제2A호, pp. 409-419.
  3. 문지호, 이종원, 최병호, 이학은(2007) 균일한 휨 모멘트가 작용하는 파형강판 복부판 I-거더의 횡-비틂 좌굴 강도 평가, 한국강구조학회논문집, 한국강구조학회, 제19권 5호, pp. 463-472.
  4. 이한구, 김광수(2008) 복부 파형강판을 사용한 PSC 복합 교량의 비틀림 해석모델의 제안 및 변수 해석, 대한토목학회논문집, 대한토목학회, 제28권 제2A호, pp. 281-288.
  5. Belarbi, A. and Hsu, T.T.C. (1994) Constitutive laws of concrete in tension and reinforcing bars stiffened by concrete. ACI Struct. J., ACI, Vol. 91, No. 4, pp. 465-474.
  6. Belarbi, A. and Hsu, T.T.C. (1995) Constitutive laws of softened concrete in biaxial tension-compression. ACI Struct. J., ACI, Vol. 92, No. 5, pp. 562-573.
  7. Chalioris, C.E. (2006) Experimental study of the torsion of reinforced concrete members. Struct. Eng. Mech., Vol. 23, No. 6, pp. 713-737. https://doi.org/10.12989/sem.2006.23.6.713
  8. Collins, M.P. and Mitchell, D. (1991) Prestressed concrete structures. Prentice Hall, Englewood Cliffs, N.J.
  9. Driver, R.G., Abbas, H.H., and Sause, R. (2006) Shear behavior of corrugated web bridge girder, J. Struct. Eng., ASCE, Vol. 132, No. 2, pp. 195-203. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(195)
  10. Elgaaly, M., Seshadri, A., and Hamilton, R.W. (1997) Bending strength of steel beams with corrugated webs. J. Struct. Eng., ASCE, Vol. 123, No. 6, pp. 772-782. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(772)
  11. Hamilton, R.W. (1993) Behavior of welled girder with corrugated webs. Ph.D. Thesis, University of Maine, Orono, Maine, Canada.
  12. Hsu, T.T.C. (1984) Torsion of Reinforced Concrete. Van Nostrand Reinhold Company Inc., New York, N.Y.
  13. Hsu, T.T.C. (1988) Softened truss model theory for shear and torsion. ACI Struct. J., ACI, Vol. 85, No. 6, pp. 624-635.
  14. Machidamrong, C., Watanabe, E., and Utsunomiya, T. (2004) Analysis of corrugated steel web girders by an efficient beam bending theory. Structural Engineering and Earthquake Engineering, JSCE, Vol. 21, No. 2, 131-142. https://doi.org/10.2208/jsceseee.21.131s
  15. Mo, Y.L. and Fan, Y.-L. (2006) Torsional design of hybrid concrete box girders. J. Bridge Eng., ASCE, Vol. 11, No. 3, pp. 329-339. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:3(329)
  16. Mo, Y.L., Jeng, C.-H., and Chang, Y.S. (2000) Torsional behavior of prestressed concrete box-girder bridges with corrugated steel webs. ACI Struct. J., ACI, Vol. 97, No. 6, pp. 849-859.
  17. Moon, J., Yi, J., Choi, B.H., and Lee, H.-E. (2009a) Lateral-torsional buckling of I-girder with corrugated webs under uniform bending. Thin-Walled Struct., Vol. 47, pp. 21-30. https://doi.org/10.1016/j.tws.2008.04.005
  18. Moon, J., Yi, J., Choi, B.H., and Lee, H.-E. (2009b) Shear strength and design of trapezoidally corrugated steel webs. J. Constr. Steel. Res., Vol. 65, pp. 1198-1205. https://doi.org/10.1016/j.jcsr.2008.07.018
  19. Samanta, A. and Mukhopadhyay, M. (1999) Finite element static and dynamic analyses of folded plates, Eng. Struct., Vol. 21, pp. 227-287.
  20. Vecchio, F.J. and Collins, M.P. (1986) The modified compression-field theory for reinforced concrete elements subjected to shear. Proc. ACI J., ACI, Vol. 83, No. 2, pp. 219-231.
  21. Yi, J., Gil, H., Youm, K., and Lee, H.E. (2008) Interactive shear buckling of trapezoidally corrugated webs. Eng. Struct., Vol. 30, pp. 1659-1166. https://doi.org/10.1016/j.engstruct.2007.11.009