DOI QR코드

DOI QR Code

Performance of High-Speed 4/2 Switched Reluctance Motor

  • Lee, Dong-Hee (Department of Mechatronics Engineering, Kyungsung University) ;
  • Ahn, Jin-Woo (Department of Mechatronics Engineering, Kyungsung University)
  • 투고 : 2010.09.01
  • 심사 : 2011.04.18
  • 발행 : 2011.09.01

초록

The current study presents the design and performance of a novel 4/2 switched reluctance motor (SRM) for a high-speed air blower. With a comparative study of some rotor structures for a high-speed drive, a stepper-type rotor is optimized to produce a continuous torque and a low torque ripple. Rotor pole arc is modified to have a wide continuous output torque region, and air gap is determined to develop less torque ripple. The rotor radius is determined to reduce torque ripple with a reiterative FEM analysis. The designed rotor has three regions: short uniform, long uniform, and nonuniform air-gap region. The positive torque region is wider than a conventional 4/2 SRM without any torque dead zone. A prototype is tested and the efficiency is up to 72[%] at 30,000[rpm], 600[w] output.

키워드

참고문헌

  1. J. W. Ahn, T. H. Kim, D. H. Lee, "Performances of SRM for LSEV", Journal of Power Electronics, vol.5, no.1, pp. 45-54, Jan. 2005.
  2. D.H. Lee, Z. G. Lee, L. Jianing, J.W. Ahn, "Single- Phase SRM Drive with Torque Ripple Reduction and Power Factor Correction", IEEE Trans. on Industry Applications, Vol 43, Issue 6, pp.1578-1587, Nov.-Dec. 2007. https://doi.org/10.1109/TIA.2007.908162
  3. K. Ohyama, M. Naguib, F. Nashed, K. Aso, H. Fujii, H. Uehara, "Design using finite element analysis of a switched reluctance motor for electric vehicle", Journal of Power Electronics, vol.6, no.2, pp. 163- 171, April 2006.
  4. T. Fukao, "Principles and Output Characteristics of Super High Speed Reluctance Generator Systems", IEEE Trans. on Industry Applications, Vol. IA-22, No. 4, PP. 702-707, 1986. https://doi.org/10.1109/TIA.1986.4504781
  5. J. Faiz, J.W. Finch, H.M.B Metwally, "A novel switched reluctance motor with multiple teeth per stator pole and comparison of such motors", Electric Power Systems Research, ELSEVIER, vol.34, pp. 197-203, 1995. https://doi.org/10.1016/0378-7796(95)00978-3
  6. T. Genda, H. Dohmeki, "Characteristics of 4/2 Switched Reluctance Motor for a high speed drive by the excitation angle," Electrical Machines and Systems, 2009. ICEMS 2009. International Conference, pp.1-6, 15-18 Nov. 2009.
  7. Jong-Han Lee, Eun-Woong Lee, Jun-Ho Kim, "Design of the single phase SRM for the blower considering self-starting," Electrical Machines and Systems, 2005. ICEMS 2005. Proceedings of the Eighth International Conference on , vol.1, pp. 667- 670 Vol. 1, 27-29 Sept. 2005.
  8. Y. Kano, T. Kosaka, N. Matsui, "Optimum Design Approach for a Two-Phase Switched Reluctance Compressor Drive," Industry Applications, IEEE Transactions on , vol.46, no.3, pp.955-964, May- June 2010. https://doi.org/10.1109/TIA.2010.2045212
  9. Qiang Zhou, Chuang Liu, Wenyu Zeng, Diji Liu, "Maximization of starting torque of a three-phase 6/2 switched reluctance motor for super high speed drive," Electrical Machines and Systems, 2008. ICEMS 2008. International Conference on, pp.3385- 3388, 17-20 Oct. 2008.
  10. S.I. Nabeta, I.E. Chabu, L. Lebensztajn, J.R. Cardoso, D.A.P. Correa, W.M. da Silva, "Kriging Models and Torque Improvements of a Special Switched Reluctance Motor," Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International, vol.1, pp.559-563, 3-5 May 2007.
  11. V. Prabhakar, M. Balaji, S. Ramkumar, V. Kamaraj, "Influence of stator and rotor profiles on torque ripple minimization in SRM," Power Electronics, 2006. IICPE 2006. India International Conference, pp.403- 406, 19-21 Dec. 2006.
  12. T. Higuchi, J. O. Fiedler, R.W De Doncker, "On the design of a single-phase switched reluctance motor," Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International, vol.1, pp. 561-567 vol.1, 1-4 June 2003. https://doi.org/10.1109/IEMDC.2003.1211318
  13. Seok-Gyu Oh, R. Krishnan, "Two Phase SRM With Flux Reversal Free Stator: Concept, Analysis, Design and Experimental Verification," Industry Applications Conference, 2006. 41st IAS Annual Meeting. Conference Record of the 2006 IEEE, vol.3, no., pp.1155-1162, 8-12 Oct. 2006. https://doi.org/10.1109/IAS.2006.256678
  14. M. Kowol, P. Mynarek, D. Mrochen, "The electromagnetic field calculation of the switched reluctance motor," Electrodynamic and Mechatronics, 2009. SCE 11 '09. 2nd International Students Conference on , pp.13-14, 19-21 May 2009
  15. H. Kuss, T. Wichert, B. Szvmanski, "Design of a high speed Switched Reluctance Motor for spindle drive," Compatibility in Power Electronics, 2007. CPE '07, pp.1-5, May 29 2007-June 1 2007

피인용 문헌

  1. Characteristics Analysis of Short Flux-path 4/3 SRM vol.2, pp.1, 2013, https://doi.org/10.11142/jicems.2013.2.1.40
  2. Design and Drive Characteristics of Low Voltage 8/6 SRM for Fan Application vol.63, pp.10, 2014, https://doi.org/10.5370/KIEE.2014.63.10.1371
  3. Four-Quadrant Control of 4/2 Switched Reluctance Machines vol.63, pp.12, 2016, https://doi.org/10.1109/TIE.2016.2594049
  4. Characteristics Analysis and Comparison of High-Speed 4/2 and Hybrid 4/4 Poles Switched Reluctance Motor vol.6, pp.1, 2018, https://doi.org/10.3390/machines6010004