Journal of Electrical Engineering and Technology

  • 제6권5호
  • /
  • Pages.626-633
  • /
  • 2011
  • /
  • 1975-0102(pISSN)
  • /
  • 2093-7423(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지
DOI QR코드

DOI QR Code

A Study on Fast Maximum Efficiency Control of Stator-Flux-oriented Induction Motor Drives

  • Shin, Myoung-Ho (Dept. of Electrical Engineering, Seoul National University of Science and Technology)
  • 투고 : 2010.07.13
  • 심사 : 2011.03.10
  • 발행 : 2011.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a novel maximum efficiency control scheme for convergence improvement in stator-flux-oriented induction motor drives. Three input powers are calculated at three different flux levels, respectively. A quadratic curve is obtained using the quadratic interpolation method using the three points. The flux level at the lowest point of the interpolated curve is calculated, which is not the real minimum input power of the motor, but an estimated one. Hence, the quadratic interpolations are repeated with three new points chosen using the selection method for new points for refitting until the convergence criteria are satisfied. The proposed method is verified by simulation results.

키워드

참고문헌

  1. Hyung-Woo Lee, Chan-Bae Park, Byung-Song Lee, "Thrust Performance Improvement of a Linear Induction Motor" Journal of Electrical Engineering &Technology, Vol. 6, No. 1, pp.81-85, Jan. 2011. https://doi.org/10.5370/JEET.2011.6.1.081
  2. A.C. Megherbi, H. Megherbi, K. Benmahamed, A.G. Aissaoui, A. Tahour, "Parameter Identification of Induction Motors using Variable-weighted Cost Function of Genetic Algorithms" Journal of Electrical Engineering &Technology, Vol. 5, No. 4, pp.597-605, Nov. 2010. https://doi.org/10.5370/JEET.2010.5.4.597
  3. Ammar Medoued, Abdesselem Lebaroud, Ahcene Boukadoum, Guy Clerc, "On-line Faults Signature Monitoring Tool for Induction Motor Diagnosis" Journal of Electrical Engineering &Technology, Vol. 5, No. 1, pp.140-145, Mar. 2010. https://doi.org/10.5370/JEET.2010.5.1.140
  4. Seesak Jangjit, Panthep Laohachai, "Parameter Estimation of Three-Phase Induction Motor by Using Genetic Algorithm", Journal of Electrical Engineering &Technology, Vol. 4, No. 3, pp.360-364, Sep. 2009. https://doi.org/10.5370/JEET.2009.4.3.360
  5. Namhun Kim, Minhuei Kim, "Modified Direct Torque Control System of Five Phase Induction Motor" Journal of Electrical Engineering &Technology, Vol. 4, No. 2, pp.266-271, Jun. 2009. https://doi.org/10.5370/JEET.2009.4.2.266
  6. Abdessalem Chikhi, Khaled Chikhi, "Induction Motor Direct Torque Control with Fuzzy Logic Method" Journal of Electrical Engineering &Technology, Vol. 4, No. 2, pp.234-239, Jun. 2009. https://doi.org/10.5370/JEET.2009.4.2.234
  7. Arezki Menacer, Gérard Champenois, Mohamed Said Naît Saïd, Abdelhamid Benakcha, Sandrine Moreau, Said Hassaine, "Rotor Failures Diagnosis of Squirrel Cage Induction Motors with Different Supplying Sources", Journal of Electrical Engineering &Technology, Vol. 4, No. 2, pp.219-228, Jun. 2009. https://doi.org/10.5370/JEET.2009.4.2.219
  8. D. S. Krischen, D. W. Novotny, and W. Suwanwisoot, "Minimizing induction losses by excitation control in variable frequency drives," IEEE Trans. on Industry Applications, vol. 20, pp. 1244-1250, Sep./Oct. 1984. https://doi.org/10.1109/TIA.1984.4504590
  9. S.-K. Sul and M.-H. Park, "A novel technique for optimal efficiency control of a current-source inverter-fed induction motor", IEEE Trans. on Power Electronics, vol. 3, no. 2, pp. 192-199, 1988. https://doi.org/10.1109/63.4349
  10. R. D. Lorenz and S. M. Yang, "Efficiency-optimized flux trajectories for closed-cycle operation of fieldorientation induction machine drives," IEEE Trans. on Industry Applications, vol. 28, pp. 574-580, May/June 1992. https://doi.org/10.1109/28.137441
  11. G. O. Garcia, J. C. Mendes Luis, R. M. Stephan, and E. H. Watanabe, "An efficient controller for an adjustable speed induction motor drive, " IEEE Trans. on Industrial Electronics, vol. 41, pp. 533-539, Oct. 1994. https://doi.org/10.1109/41.315272
  12. I. Kioskeridis and N. Margaris, "Loss minimization in induction motor adjustable-speed drive," IEEE Trans. on Industrial Electronics, vol. 43, pp. 226-231, Feb. 1996. https://doi.org/10.1109/41.481429
  13. G. Dong and O. Ojo, "Efficiency optimizing control of induction motor using natural variables," IEEE Trans. on Industrial Electronics, vol. 53, no. 6, pp. 1791-1798, Dec. 2006. https://doi.org/10.1109/TIE.2006.885117
  14. D. S. Kirschen, D. W. Novotny, and T. A. Lipo, "Online efficiency optimization of a variable frequency induction motor drive", IEEE Trans. on Industry Applications, vol. 21, no. 4, pp. 610-615, 1985. https://doi.org/10.1109/TIA.1985.349717
  15. G. C. D. Sousa, B. K. Bose, and J. G. Cleland, "Fuzzy logic based on-line efficiency optimization control of an indirect vector-controlled induction motor drive", IEEE Trans. on Industrial Electronics, vol. 42, no. 2, pp. 192-198, 1995. https://doi.org/10.1109/41.370386
  16. G.-S. Kim, I.-J. Ha, and M.-S. Ko, "Control of induction motors for both high dynamic performance and high power efficiency", IEEE Trans. on Industrial Electronics, vol. 39, no. 4, pp. 323-333, 1992. https://doi.org/10.1109/41.149750
  17. B. K. Bose, N. R. Patel, and K. Rajashekara, "A Neuro-Fuzzy-Based On-Line Efficiency Optimization Control of a Stator Flux-Oriented Direct Vector-Controlled Induction Motor Drive", IEEE Trans. on Industrial Electronics, vol. 44, no. 2, pp. 270-273, 1997. https://doi.org/10.1109/41.564168
  18. C.-M. Ta and Y. Hori, "Convergence improvement of efficiency optimization control of induction motor drives", IEEE Trans. on Industry Applications, vol. 37, no. 6, pp. 1746-1753, 2001. https://doi.org/10.1109/28.968187
  19. D. D. A. Souza, W. C. P. D. A. Filho, and G. C. D. Sousa, "Adaptive fuzzy controller for efficiency optimization of induction motors," IEEE Trans. on Industrial Electronics, vol. 54, no. 4, pp. 2157-2164, Aug. 2007. https://doi.org/10.1109/TIE.2007.895138
  20. M.-H. Shin, "Maximum efficiency control of induction motor drives using quadratic interpolation method", Journal of the Korean Institute of Illuminating and Electrical Installation Engineers, vol. 23, no.9, pp. 62-66, 2009. https://doi.org/10.5207/JIEIE.2009.23.9.062
  21. C. Chakraborty and Y. Hori, "Fast efficiency optimization techniques for the indirect vectorcontrolled induction motor drives", IEEE Trans. on Industry Applications, vol. 39, no. 4, pp. 1070-1076, 2003. https://doi.org/10.1109/TIA.2003.814550
  22. S. N. Vukosavic and E. Levi, "Robust DSP-based efficiency optimization of a variable speed induction motor drive," IEEE Trans. on Industrial Electronics, vol. 50, no. 3, pp. 560-570, Jun. 2003. https://doi.org/10.1109/TIE.2003.812468
  23. S.-D. Wee, M.-H. Shin, and D.-S. Hyun, "Stator- Flux-Oriented Control of Induction Motor Considering Iron Loss," IEEE Trans. on Industrial Electronics, vol. 48, no. 3, pp. 602-608, Jun. 2001. https://doi.org/10.1109/41.925587
  24. X. Xu, R. D. Doncker, and D. W. Novotny, "A Stator Flux Oriented Induction Machine Drive", IEEE PESC88, pp. 870-876, 1988.
  25. X. Xu and D. W. Novotny, "Implementation of direct stator flux orientation control on a versatile DSP based system," IEEE Trans. Ind. Applications, vol. 27, no. 4, pp. 694-700, July/Aug. 1991. https://doi.org/10.1109/28.85484
  26. S. S. Rao, "Optimization: Theory and Applications," John Willy and Sons, pp.234-242, 1984.