대한금속재료학회지 (Korean Journal of Metals and Materials)

  • 제48권8호
  • /
  • Pages.749-756
  • /
  • 2010
  • /
  • 1738-8228(pISSN)
  • /
  • 2288-8241(eISSN)
대한금속재료학회 (The Korean Institute of Metals and Materials)
권호 표지
DOI QR코드

DOI QR Code

저탄소강의 대기중 1050~1180℃의 산화에 미치는 합금원소 Si, S, Cu, Sn, Ni의 영향

Effect of Alloying Elements Si, S, Cu, Sn, and Ni on Oxidation of Low Carbon Steels between 1050 and 1180℃ in Air

  • Bak, Sang Hwan (School of Advanced Materials Science & Engineering, Sungkyunkwan University) ;
  • Lee, Dong Bok (School of Advanced Materials Science & Engineering, Sungkyunkwan University) ;
  • Baek, Seon-Pil (Technical Research Center, Hyundai Steel Co.)
  • 투고 : 2010.03.24
  • 발행 : 2010.08.22
⟨ 이전 논문 다음 논문 ⟩

초록

Low carbon steels were oxidized isothermally at 1050 and $1180^{\circ}C$ for 4 hr in air in order to determine the effect of alloying elements Si, S, Cu, Sn, and Ni on oxidation. For oxidation resistance of low carbon steels, the beneficial elements were Si, Cu, and Ni, whereas the harmful elements were S and Sn. The most active alloying element, Si, was scattered inside the oxide scale, at the scale-alloy interface, and as an internal oxide precipitate. The relatively noble elements such as Cu and Ni tended to weakly segregate at the scale-alloy interface. Sulfur and Sn were weakly, uniformly distributed inside the oxide scale. Excessively thick, non-adherent scales containing interconnected pores formed at $1180^{\circ}C$.

키워드

과제정보

연구 과제 주관 기관 : 현대제철주식회사

참고문헌

  1. R. Y. Chen and W. Y. D.Yuen, Developments in High-temperature Corrosion and Protection of Materials (eds. W. Gao and Z. Li), p.192, Woodhead Pub. Ltd, Cambridge, England (2008).
  2. R. Y. Chen and W. Y. D. Yuen, Oxid. Met. 63, 145 (2005). https://doi.org/10.1007/s11085-004-3197-0
  3. N. Birks, G. H. Meier, and F. S. Pettit, Introduction to High Temperature Oxidation of Metals, 2nd ed., p.83, Cambridge University Press, UK (2006).
  4. H. Nakata, A. Sannai, S. Taniguchi, K. Kurokawa, I. R. Sohn, and J. W. Choi, Collected Abstracts of the 2010 Spring Meeting of The Japan Institute of Metals, p.368 (2010)
  5. S. Taniguchi, K. Yamamoto, D. Megumi, and T. Shibata, Mater. Sci. Eng. A308, 250 (2001).
  6. S. H. Jeon, K. G. Chin, K. S. Shin, H. S. Sohn, and D. R. Kim, J. Kor. Inst. Met. & Mater. 46, 289 (2008).
  7. J. B. Yoon, S. I. Kim, and I. B. Kim, J. Kor. Inst. Met. & Mater. 47, 331 (2009).
  8. S. H. Jeon, K. S. Shin, H. S. Sohn, and D. R. Kim, J. Kor. Inst. Met. & Mater. 46, 427 (2008).
  9. I. S. Oh, K. C. Cho, D. H. Kim, G. M. Kim, and I. R. Sohn, J. Kor. Inst. Met. & Mater. 47, 229 (2009).
  10. K. S. Son, T. E. Park, B. H. Park, and D. G. Kim, J. Kor. Inst. Met. & Mater. 47, 217 (2009).