참고문헌
- R. K. Varshney, “Side-polished fiber coupler half block and devices,” in Guided Wave Optics, A. Sharma, ed. (Viva Books Pvt. Ltd., New Delhi, India, 2005), Chapter 7.
- W. Johnstone, G. Thursby, D. Moodie, R. K. Varshney, and B. Culshaw, “Fiber optic wavelength channel selector with high resolution,” Electron. Lett. 28, 1364-1365 (1992). https://doi.org/10.1049/el:19920867
- S. M. Tseng and C. L. Chen, “Side polished fibers,” Appl. Opt. 31, 3438-3447 (1992). https://doi.org/10.1364/AO.31.003438
- R. K. Varshney, A. Singh, K. Pande, and B. P. Pal, “Side polished fiber based gain flattening filter for erbium doped fiber amplifiers,” Opt. Comm. 271, 441-444 (2007). https://doi.org/10.1016/j.optcom.2006.10.064
- B. P. Pal, G. Raizada, and R. K. Varshney, “Modelling a fiber half block with multimode overlay waveguide,” J. Opt. Comm. 17, 179-183 (1996).
- G. Raizada and B. P. Pal, “Refractometers and tunable components based on side polished fibers with multimode overlay waveguides: role of the superstrate,” Opt. Lett. 21, 399-401 (1996). https://doi.org/10.1364/OL.21.000399
- D. Flannery, S. W. James, R. P. Tatamand, and G. J. Ashwell, “pH sensors using Langmuir Blodgett overlay on polished optical fibers,” Opt. Lett. 15, 567-569 (1997).
- K. R. Sohn, K. T. Kim, and S. W. Kang, “Optical fiber sensor for water detection using side polished fiber with a planar glass overlay waveguide,” Sens. Actuators A 101, 137-142 (2002). https://doi.org/10.1016/S0924-4247(02)00215-7
- W. G. Jung, S. W. Kim, K. T. Kim, E. S. Kim, and S. W. Kang, “High sensitivity temperature sensor using a side polished single mode fiber covered with the polymer planar waveguide,” IEEE Photon. Technol. Lett. 13, 1209-1211 (2001). https://doi.org/10.1109/68.959366
- C. L. Tien, C. C. Hwang, H. W. Chen, W. F. Liu, and S. W. Lin, “Magnetic sensor based on side-polished fiber Bragg grating coated with iron film,” IEEE Trans. on Magnetics 42, 3285-3287 (2006). https://doi.org/10.1109/TMAG.2006.881095
- H. Y. Lin, W. H. Tsai, Y. C. Tsao, and B. C. Sheu, “Side-polished multimode fiber biosensor based on surface plasmon resonance with halogen light,” Appl. Opt. 46, 800-806 (2007). https://doi.org/10.1364/AO.46.000800
- B. Nagaraju, R. K. Varshney, B. P. Pal, A. Singh, G. Monnom, and B. Dussardier, “Design and realization of a side-polished single-mode fiber optic high sensitive temperature sensor,” Proc. SPIE 7138, 71381H-1-71381H-6 (2008).
- R. K. Varshney, B. Nagaraju, A. Singh, B. P. Pal, and A. K. Kar, “Design and realization of an all-fiber broadband tunable gain equalization filter for DWDM signals,” Opt. Express 15, 13519-13530 (2007). https://doi.org/10.1364/OE.15.013519
- K. T. Kim, S. Hwangbo, J. P. Mah, and K. R. Sohn, “Widely tunable filter based on coupling between a side-polished fiber and a tapered planar waveguide,” IEEE Photon. Technol. Lett. 17, 142-144 (2005). https://doi.org/10.1109/LPT.2004.837255
- A. Sharma, J. Kompella, and P. K. Mishra, “Analysis of fiber directional coupler half blocks using a new simple model for single mode fiber,” IEEE J. Lightwave Technol. 8, 143-151 (1990). https://doi.org/10.1109/50.47863
- A. K. Ghatak, K. Thyagarajan, and M. R. Shenoy, “Numerical analysis of planar optical waveguides using matrix method,” IEEE J. Lightwave Technol. 5, 660-667 (1987). https://doi.org/10.1109/JLT.1987.1075553
- Y. J. Rao, “In-fiber grating sensors,” Meas. Sci. Technol. 8, 355 (1997). https://doi.org/10.1088/0957-0233/8/4/002
- A. D. Kersey, M. A. Davis, H. J. Patrick, M. LeBlanc, K. P. Koo, C. G. Askins, M. A. Putnam, and E. J. Friebele, “Fiber grating sensors,” IEEE J. Lightwave Technol. 15, 1442-1463 (1997). https://doi.org/10.1109/50.618377
피인용 문헌
- Interferometric Fiber Optic Sensors vol.12, pp.12, 2012, https://doi.org/10.3390/s120302467
- Temperature sensing characteristics of tapered Tm3+-doped fiber amplifiers vol.27, pp.8, 2017, https://doi.org/10.1088/1555-6611/aa7d91
- Sagnac interferometer based on an etched photonic crystal fiber vol.60, pp.8, 2012, https://doi.org/10.3938/jkps.60.1229
- Optical-fiber Electronic Speckle Pattern Interferometry for Quantitative Measurement of Defects on Aluminum Liners in Composite Pressure Vessels vol.17, pp.1, 2013, https://doi.org/10.3807/JOSK.2013.17.1.050
- A numerical algorithm to determine straightness error, surface roughness, and waviness measured using a fiber optic interferometer vol.85, 2016, https://doi.org/10.1016/j.optlastec.2016.05.014
- Temperature sensing characteristics of tapered Yb-doped fiber amplifiers vol.124, pp.22, 2013, https://doi.org/10.1016/j.ijleo.2013.04.052
- Power, sensitivity, and response time optimization in TDM self-reference intensity sensor networks with ring resonators vol.26, pp.24, 2018, https://doi.org/10.1364/OE.26.031264