DOI QR코드

DOI QR Code

Coupled thermal and structural analysis of roller compacted concrete arch dam by three-dimensional finite element method

  • Bayagoob, Khaled H. (Civil Engineering Department, Universiti Putra Malaysia) ;
  • Noorzaei, Jamaloddin (Institute of Advance Technology, Universiti Putra Malaysia) ;
  • Abdulrazeg, Aeid A. (Civil Engineering Department, Universiti Putra Malaysia) ;
  • Al-Karni, Awad A. (Civil Engineering Department, King Saud University) ;
  • Jaafar, Mohd Saleh (Civil Engineering Department, Universiti Putra Malaysia)
  • 투고 : 2009.07.05
  • 심사 : 2009.12.21
  • 발행 : 2010.11.10

초록

This paper focuses on the development, verification and application of a three-dimensional nite element code for coupled thermal and structural analysis of roller compacted concrete arch dams. The Ostour Arch dam located on Ghezel-Ozan River, Iran, which was originally designed as conventional concrete arch dam, has been taken for the purpose of verication of the nite element code. In this project, RCC technology has been ascertained as an alternative method to reduce the cost of the project and make it competitive. The thermal analysis has been carried out taking into account the simulation of the sequence of construction, environmental temperature changes, and the wind speed. In addition, the variation of elastic modulus with time has been considered in this investigation using Concard's model. An attempt was made to compare the stresses developed in the dam body five years after the completion of the dam with those of end of the construction. It was seen that there is an increase in the tensile stresses after five years over stresses obtained immediately at the end of construction by 61.3%.

키워드

참고문헌

  1. ACI 207 1R (1987), "Mass concrete for dams and other massive structures", ACI Committee, USA.
  2. ACI 207 5R-99 (2004), "Roller-compacted mass concrete", ACI Manual of Concrete Practice, Part 1, USA.
  3. Bayagoob, K.H. (2007), "Thermal and structural analysis of RCC dams", PhD Thesis, Department of Civil Engineering, Universiti Putra Malaysia, Malaysia.
  4. Conrad, M., Aufleger, M. and Malkawi, A.I.H. (2003), "Investigations on the modulus of elasticity of young RCC", Proceedings of the Fourth International Symposium on RCC Dams, Madrid, Spain.
  5. Ghanaat, Y. and Clough, R.W. (1989), "EADAP enhanced arch dam analysis program user,s manual, report No. UCB/EERC-89/07", Earthquake Engineering Research Centre, University of California, Berkeley, California.
  6. Xie, H. and Chen, Y. (2005), "Influence of the different pipe cooling scheme on temperature distribution in RCC arch dam", Commun. Numer. Meth. En., 21, 769-778. https://doi.org/10.1002/cnm.793
  7. Incropera, F.P. and DeWitt, D.P. (2002), Fundamentals of Heat and Mass Transfer, John Wiley & Sons, New York.
  8. Ishikawa, M. (1991), "Thermal stress analysis of a concrete dam", Comput. Struct., 40(2), 347-352. https://doi.org/10.1016/0045-7949(91)90360-X
  9. Jaafar, M., Bayagoob, K., Noorzaei, J. and Thanoon, W. (2007), "Development of finite element computer code for thermal analysis of roller compacted concrete dams", J. Adv. Eng. Software, 38, 886-895. https://doi.org/10.1016/j.advengsoft.2006.08.040
  10. Lingfei, X. and Li, Y. (2008), "Research on temperature control and anti-cracking simulation for xiaowan concrete high arch dam", Proceedings of the International Conference on Computer Science and Software Engineering.
  11. Nilipour, N. (2003), Study of Arch Concrete Dams Constructed by RCC Method, Switzerland, Article in press.
  12. Noorzaei, J., Bayagoob, K., Thanoon, W. and Jaafar, M. (2006), "Thermal and stress analysis of kinta RCC dam", J. Eng. Struct., 28, 1795-1802. https://doi.org/10.1016/j.engstruct.2006.03.027
  13. Noorzaei, J., Thanoon, W.A., Jafaar, M.S. and Zarrini, M.R. (2005), "Modelling of arch dams via finite-infiniteinterface elements", J. Struct. Eng., 32(4), 253-260.
  14. Qiuhua, C. (2003), "New design method of RCC high arch dam", Proceedings of the Fourth International Symposium on RCC Dams, Madrid, Spain.
  15. Sergerlind, L.J. (1984), Applied Finite Element Analysis, 2nd edition, John Wiley and Sons, New York.
  16. Sheibany, F. and Ghaemian, M. (2006), "Effects of environmental action on thermal stress analysis of Karaj concrete arch dam", J. Eng. Mech., 132(5), 532-544. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:5(532)
  17. Shuping, H. et al (1999), "The emulation analysis of thermal stresses on RCC arch dams", International Symposium on Roller Compacted Concrete, China.
  18. Xiaofei. Zhang, Shouyi, L., Yaolong, C. and Junrui, C. (2009), "The development and verification of relocating mesh method for the computation of temperature of RCC dam", Adv. Eng. Software, 40(11), 1119-1123. https://doi.org/10.1016/j.advengsoft.2009.05.006
  19. Yuksel, S.B. (2009), "Behavior of symmetrically haunched non-prismatic members subjected to temperature changes", Struct. Eng. Mech., 31(3), 297-314. https://doi.org/10.12989/sem.2009.31.3.297
  20. Zhang, G.X., Liu, G.T. and Wu, Y. (1996), "Harmonic thermal fracture of multiple crack system and the stability of cracks in RCC arch dam", Eng. Fract. Mech., 54(5), 653-665. https://doi.org/10.1016/0013-7944(95)00230-8
  21. Zhou, H.F., Ni, Y.Q., Ko, J.M. and Wong, K.Y. (2008), "Modeling of wind and temperature effects on modal frequencies and analysis of relative strength of effect", Wind Struct., 11(1), 35-50. https://doi.org/10.12989/was.2008.11.1.035

피인용 문헌

  1. Modeling of combined thermal and mechanical action in roller compacted concrete dam by three-dimensional finite element method vol.47, pp.1, 2013, https://doi.org/10.12989/sem.2013.47.1.001
  2. Seepage and stress analysis of anti-seepage structures constructed with different concrete materials in an RCC gravity dam vol.8, pp.4, 2015, https://doi.org/10.1016/j.wse.2015.10.001
  3. Experimental Study on Early-Age Crack of Mass Concrete under the Controlled Temperature History vol.2014, 2014, https://doi.org/10.1155/2014/671795
  4. An improved 1D-model for computing the thermal behaviour of concrete dams during operation. Comparison with other approaches vol.15, pp.1, 2015, https://doi.org/10.12989/cac.2015.15.1.103
  5. Experimental Study on Early-Age Crack of RC Using TSTM vol.919-921, pp.1662-8985, 2014, https://doi.org/10.4028/www.scientific.net/AMR.919-921.119
  6. A comprehensive evaluation method study for dam safety vol.63, pp.5, 2017, https://doi.org/10.12989/sem.2017.63.5.639
  7. An analytical approach of behavior change for concrete dam by panel data model vol.36, pp.5, 2010, https://doi.org/10.12989/scs.2020.36.5.521