DOI QR코드

DOI QR Code

An analytical solution of bending thin plates with different moduli in tension and compression

  • He, Xiao-Ting (College of Civil Engineering, Chongqing University) ;
  • Hu, Xing-Jian (College of Civil Engineering, Chongqing University) ;
  • Sun, Jun-Yi (College of Civil Engineering, Chongqing University) ;
  • Zheng, Zhou-Lian (College of Civil Engineering, Chongqing University)
  • 투고 : 2010.04.12
  • 심사 : 2010.06.27
  • 발행 : 2010.10.20

초록

Materials which exhibit different elastic moduli in tension and compression are known as bimodular materials. The bimodular materials model, which is founded on the criterion of positive-negative signs of principal stress, is important for the structural analysis and design. However, due to the inherent complexity of the constitutive relation, it is difficult to obtain an analytical solution of a bimodular bending components except in particular simple problems. Based on the existent simplified model, this paper solves analytically bending thin plates with different moduli in tension and compression. By using the continuity conditions of stress components in unknown neutral layer, we determine the location of the neutral layer, and derive the governing differential equation for deflection, the flexural rigidity, and the internal forces in the thin plate. We also use a circular thin plate with bimodulus to illustrate the application of this solution derived in this paper. The results show that the introduction of different moduli has influences on the flexural stiffness of the bending thin plate.

키워드

참고문헌

  1. Ambartsumyan, S.A. (1986), Elasticity Theory of Different Moduli (Wu, R.F. and Zhang, Y.Z. trans.), China Railway Publishing House, Beijing, China.
  2. Bert, C.W. (1977), "Models for fibrous composites with different properties in tension and compression", J. Eng. Mater-T. ASME., 99(4), 344-349. https://doi.org/10.1115/1.3443550
  3. Bert, C.W. and Gordaninejad, F. (1983), "Transverse effects in bimodular composite laminates", J. Compos. Mater., 17(4), 282-298. https://doi.org/10.1177/002199838301700401
  4. Cai, L.S. and Yu, H.R. (2009), "Constitutive relation of elastic materials with different elastic moduli in tension and compression", J. Xi'an Univ. Sci. Technol., 29(1), 17-21.
  5. Greco, F. (2009), "Homogenized mechanical behavior of composite micro-structures including micro-cracking and contact evolution", Eng. Fract. Mech., 76(2), 182-208. https://doi.org/10.1016/j.engfracmech.2008.09.006
  6. He, X.T., Chen, S.L. and Sun, J.Y. (2007a), "Applying the equivalent section method to solve beam subjected lateral force and bending-compression column with different moduli", Int. J. Mech. Sci., 49(7), 919-924. https://doi.org/10.1016/j.ijmecsci.2006.11.004
  7. He, X.T., Chen, S.L. and Sun, J.Y. (2007b), "Elasticity solution of simple beams with different modulus under uniformly distributed load", Chinese J. Eng. Mech., 24(10), 51-56.
  8. He, X.T., Zheng, Z.L., Sun, J.Y., Li, Y.M. and Chen, S.L. (2009), "Convergence analysis of a finite element method based on different moduli in tension and compression", Int. J. Solids Struct., 46(20), 3734-3740. https://doi.org/10.1016/j.ijsolstr.2009.07.003
  9. Jones, R.M. (1976), "Apparent flexural modulus and strength of multimodulus materials", J. Compos. Mater., 10(4), 342-354. https://doi.org/10.1177/002199837601000407
  10. Jones, R.M. (1977), "Stress-strain relations for materials with different moduli in tension and compression", AIAA J., 15(1), 16-23. https://doi.org/10.2514/3.7297
  11. Li, L.Y. (1990), "The rationalism theory and its finite element analysis method of shell structures", Appl. Math. Mech. (English edition), 11(4), 395-402. https://doi.org/10.1007/BF02015123
  12. Liu, X.B. and Zhang, Y.Z. (2000), "Modulus of elasticity in shear and accelerate convergence of different extension-compression elastic modulus finite element method", J. Dalian Univ. Technol., 40(5), 527-530.
  13. Patel, B.P., Lele, A.V., Ganapathi, M., Gupta, S.S. and Sambandam, C.T. (2004), "Thermo-flexural analysis of thick laminates of bimodulus composite materials", Compos. Struct., 63(1), 11-20. https://doi.org/10.1016/S0263-8223(03)00120-X
  14. Patel, B.P., Gupta, S.S. and Sarda, R. (2005), "Free flexural vibration behavior of bimodular material angle-ply laminated composite plates", J. Sound Vib., 286(1-2), 167-186. https://doi.org/10.1016/j.jsv.2004.10.004
  15. Khan, K., Patel, B.P. and Nath, Y. (2009), "Vibration analysis of bimodulus laminated cylindrical panels", J. Sound Vib., 321(1-2), 166-183. https://doi.org/10.1016/j.jsv.2008.09.017
  16. Reddy, J.N. and Chao, W.C. (1983), "Nonlinear bending of bimodular-material plates", Int. J. Solids Struct., 19(3), 229-237. https://doi.org/10.1016/0020-7683(83)90059-8
  17. Shin, K.J., Lee, K.M. and Chang, S.P. (2008), "Numerical modeling for cyclic crack bridging behavior of fiber reinforced cementitious composites", Struct. Eng. Mech., 30(2), 147-164. https://doi.org/10.12989/sem.2008.30.2.147
  18. Srinivasan, R.S. and Ramachandra, L.S. (1989), "Large deflection analysis of bimodulus annular and circular plates using finite elements", Comput. Struct., 31(5), 681-691. https://doi.org/10.1016/0045-7949(89)90202-2
  19. Yang, H.T., Yang, K.J. and Wu, R.F. (1999), "Solution of 3-D elastic dual extension compression modulus problems using initial stress technique", J. Dalian Univ. Technol., 39(4), 478-482.
  20. Yang, H.T. and Zhu, Y.L. (2006), "Solving elasticity problems with bi-modulus via a smoothing technique", Chinese J. Comput. Mech., 23(1), 19-23.
  21. Yang, H.T. and Wang, B. (2008), "An analysis of longitudinal vibration of bimodular rod via smoothing function approach", J. Sound Vib., 317(3-5), 419-431. https://doi.org/10.1016/j.jsv.2008.03.060
  22. Yao, W.J. and Ye, Z.M. (2004a), "Analytical solution of bending-compression column using different tensioncompression modulus", Appl. Math. Mech. (English edition), 25(9), 983-993. https://doi.org/10.1007/BF02438347
  23. Yao, W.J. and Ye, Z.M. (2004b), "Analytical solution for bending beam subject to lateral force with different modulus", Appl. Math. Mech. (English edition), 25(10), 1107-1117. https://doi.org/10.1007/BF02439863
  24. Yao, W.J. and Ye, Z.M. (2004c), "The analytical and numerical solution of retaining wall based on elastic theory of different modulus", J. Shanghai Jiaotong Univ., 38(6), 1022-1027.
  25. Yao, W.J. and Ye, Z.M. (2006), "Internal forces for statically indeterminate structures having different moduli in tension and compression", J. Eng. Mech.-ASCE, 132(7), 739-746. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:7(739)
  26. Yao, W.J., Zhang, C.H. and Jiang, X.F. (2006), "Nonlinear mechanical behavior of combined members with different moduli", Int. J. Nonlin. Sci. Numer. Simul., 7(2), 233-238. https://doi.org/10.1515/IJNSNS.2006.7.2.233
  27. Ye, Z.M. (1997), "A new finite formulation for planar elastic deformation", Int. J. Numer. Meth. Eng., 14(40), 2579-2592.
  28. Ye, Z.M., Chen, T. and Yao, W.J. (2004), "Progresses in elasticity theory with different modulus in tension and compression and related FEM", Chinese J. Mech. Eng., 26(2), 9-14.
  29. Zhang, Y.Z. and Wang, Z.F. (1989), "Finite element method of elasticity problem with different tension and compression moduli", Chinese J. Comput. Struct. Mech. Appl., 6(1), 236-245.
  30. Zinno, R. and Greco, F. (2001), "Damage evolution in bimodular laminated composites under cyclic loading", Compos. Struct., 53(4), 381-402. https://doi.org/10.1016/S0263-8223(01)00048-4

피인용 문헌

  1. Application of a biparametric perturbation method to large-deflection circular plate problems with a bimodular effect under combined loads vol.420, pp.1, 2014, https://doi.org/10.1016/j.jmaa.2014.05.016
  2. Thermal Stress Analysis for Bi-modulus Foundation Beam under Nonlinear Temperature Difference vol.14, pp.01, 2017, https://doi.org/10.1142/S0219876217500244
  3. Simplified theory and analytical solution for functionally graded thin plates with different moduli in tension and compression vol.74, 2016, https://doi.org/10.1016/j.mechrescom.2016.04.006
  4. Analytical Solutions for Bending Curved Beams with Different Moduli in Tension and Compression vol.22, pp.5, 2015, https://doi.org/10.1080/15376494.2012.736053
  5. Large-deflection axisymmetric deformation of circular clamped plates with different moduli in tension and compression vol.62, pp.1, 2012, https://doi.org/10.1016/j.ijmecsci.2012.06.003
  6. Temperature stress analysis for bi-modulus beam placed on Winkler foundation vol.38, pp.7, 2017, https://doi.org/10.1007/s10483-017-2216-6
  7. A perturbation solution of von-Kármán circular plates with different moduli in tension and compression under concentrated force vol.23, pp.3, 2016, https://doi.org/10.1080/15376494.2014.981615
  8. Analytical solution for a flexural bimodulus beam vol.6, pp.2, 2017, https://doi.org/10.1680/jemmr.15.00081
  9. General perturbation solution of large-deflection circular plate with different moduli in tension and compression under various edge conditions vol.55, 2013, https://doi.org/10.1016/j.ijnonlinmec.2013.05.008
  10. Elastic solutions of a functionally graded cantilever beam with different modulus in tension and compression under bending loads vol.38, pp.4, 2014, https://doi.org/10.1016/j.apm.2013.08.021
  11. Numerical Analysis on Bending Deep Beams with Different Moduli in Tension and Compression vol.446-449, pp.1662-8985, 2012, https://doi.org/10.4028/www.scientific.net/AMR.446-449.807
  12. An Elastic Solution of a Functionally Graded Cantilever Beam with Different Modulus in Tension and Compression under Uniform Pressure vol.717, pp.1662-8985, 2013, https://doi.org/10.4028/www.scientific.net/AMR.717.396
  13. Analytical and numerical study of temperature stress in the bi-modulus thick cylinder vol.64, pp.1, 2010, https://doi.org/10.12989/sem.2017.64.1.081
  14. Bending analysis of functionally graded curved beams with different properties in tension and compression vol.89, pp.9, 2019, https://doi.org/10.1007/s00419-019-01555-8
  15. Large Deformation Problem of Bimodular Functionally-Graded Thin Circular Plates Subjected to Transversely Uniformly-Distributed Load: Perturbation Solution without Small-Rotation-Angle Assumption vol.9, pp.18, 2021, https://doi.org/10.3390/math9182317
  16. Application of Variational Method to Stability Analysis of Cantilever Vertical Plates with Bimodular Effect vol.14, pp.20, 2010, https://doi.org/10.3390/ma14206129