DOI QR코드

DOI QR Code

Construction stage analysis of Kömürhan Highway Bridge using time dependent material properties

  • 투고 : 2010.02.04
  • 심사 : 2010.06.16
  • 발행 : 2010.09.30

초록

The aim of this study concerns with the construction stage analysis of highway bridges constructed with balanced cantilever method using time dependent material properties. K$\ddot{o}$m$\ddot{u}$rhan Highway Bridge constructed with balanced cantilever method and located on the 51st km of Elazi$\check{g}$-Malatya, Turkey, highway over Firat River is selected as an application. Finite element models of the bridge are modelled using SAP2000 program. Geometric nonlinearity is taken into consideration in the analysis using P-Delta plus large displacement criterion. The time dependent material strength variations and geometric variations are included in the analysis. Elasticity modulus, creep and shrinkage are computed for different stages of the construction process. The structural behaviour of the bridge at different construction stages has been examined. Two different finite element analyses with and without construction stages are carried out and results are compared with each other. As analyses result, variation of internal forces such as bending moment, axial forces and shear forces for bridge deck and column are given with detail. It is seen that construction stage analysis has remarkable effect on the structural behaviour of the bridge.

키워드

참고문헌

  1. CEB-FIB Model Code (1990), Thomas Telford, ISBN: 0727716964.
  2. Cheng, J., Jiang, J.J., Xiao, R.C. and Xia, M. (2003), "Wind-induced load capacity analysis and parametric study of a long-span steel arch bridge under construction", Comput. Struct., 81, 2513-2524. https://doi.org/10.1016/S0045-7949(03)00304-3
  3. Cho, T. and Kim, T.S. (2008), "Probabilistic risk assessment for the construction phases of a bridge construction based on finite element analysis", Finite Elem. Anal. Des., 44, 383-400. https://doi.org/10.1016/j.finel.2007.12.004
  4. Harputoglu, Z., Celebi, N. and Tulumta , F. (2007), "Gulburnu bridge", Proceedings of the First Symposium of Bridges and Viaducts, Antalya, Turkey, November.
  5. Karakaplan, A., Caner, A., Kurc, O., Domanic, A. and Lulec, A. (2007), "New strategy in the structural analysis: construction stage", Proceedings of the First Symposium of Bridges and Viaducts, Antalya, Turkey, November.
  6. Ko, J.M., Xue, S.D. and Xu, Y.L. (1998), "Modal analysis of suspension bridge deck units in erection stage", Eng. Struct., 20, 1102-1112. https://doi.org/10.1016/S0141-0296(97)00207-1
  7. Kumar, S. (2003), "Balanced cantilever-a specialist method in bridge construction", Editio, 1, 1-16.
  8. Kwak, H.G. and Seo, Y.J. (2002), "Numerical analysis of time-dependent behaviour of pre- cast pre-stressed concrete girder bridges", Constr. Build. Mater., 16, 49-63. https://doi.org/10.1016/S0950-0618(01)00027-7
  9. Pindado, S., Meseguer, J. and Franchini, S. (2005), "The influence of the section shape of box-girder decks on the steady aerodynamic yawing moment of double cantilever bridges under construction", J. Wind Eng. Ind. Aerod., 93, 547-555. https://doi.org/10.1016/j.jweia.2005.05.005
  10. SAP2000 (2008), Integrated Finite Element Analysis and Design of Structures, Computers and Structures Inc, Berkeley, California, USA.
  11. Somja, H. and Goyet, V.V. (2008), "A new strategy for analysis of erection stages including an efficient method for creep analysis", Eng. Struct., 30, 2871-2883. https://doi.org/10.1016/j.engstruct.2008.03.015
  12. Wang, P.H., Tang, T.Y. and Zheng, H.N. (2004), "Analysis of cable-stayed bridges during construction by cantilever methods", Comput. Struct., 82, 329-346. https://doi.org/10.1016/j.compstruc.2003.11.003

피인용 문헌

  1. Effects of soil-structure interaction on construction stage analysis of highway bridges vol.12, pp.2, 2013, https://doi.org/10.12989/cac.2013.12.2.169
  2. A specific rod model based efficient analysis and design of hanger installation for self-anchored suspension bridges with 3D curved cables vol.110, 2016, https://doi.org/10.1016/j.engstruct.2015.11.040
  3. Numerical modelling of continuous concrete box girder bridges considering construction stages vol.35, pp.8, 2011, https://doi.org/10.1016/j.apm.2011.02.016
  4. Construction stage analysis of Humber Suspension Bridge vol.36, pp.11, 2012, https://doi.org/10.1016/j.apm.2012.01.011
  5. Determination of structural behavior of Bosporus suspension bridge considering construction stages and different soil conditions vol.17, pp.4, 2014, https://doi.org/10.12989/scs.2014.17.4.405
  6. Construction stages analyses using time dependent material properties of concrete arch dams vol.14, pp.5, 2014, https://doi.org/10.12989/cac.2014.14.5.599
  7. Construction stage analysis of three-dimensional cable-stayed bridges vol.12, pp.5, 2012, https://doi.org/10.12989/scs.2012.12.5.413
  8. Construction stage analysis of fatih sultan mehmet suspension bridge vol.42, pp.4, 2012, https://doi.org/10.12989/sem.2012.42.4.489
  9. A simplified frequency formula for post-tensioned balanced cantilever bridges vol.20, pp.7, 2010, https://doi.org/10.1007/s42107-019-00160-y
  10. Near-fault vertical ground motion effects on the response of balanced cantilever bridges vol.173, pp.1, 2020, https://doi.org/10.1680/jbren.19.00007