Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

A reinforced concrete frame element with shear effect

  • Valipour, Hamid R. (School of Civil and Environmental Engineering, University of Technology) ;
  • Foster, Stephen J. (School of Civil and Environmental Engineering, The University of New South Wales)
  • Received : 2009.07.20
  • Accepted : 2010.04.30
  • Published : 2010.09.10
⟨ Previous Next ⟩

Abstract

A novel flexibility-based 1D element that captures the material nonlinearity and second order P-$\Delta$ effects within a reinforced concrete frame member is developed. The formulation is developed for 2D planar frames in the modified fiber element framework but can readily be extended to 3D cases. The nonlinear behavior of concrete including cracking and crushing is taken into account through a modified hypo-elastic model. A parabolic and a constant shear stress distribution are used at section level to couple the normal and tangential tractions at material level. The lack of objectivity due to softening of concrete is addressed and objectivity of the response at the material level is attained by using a technique derived from the crack band approach. Finally the efficiency and accuracy of the formulation is compared with experimental results and is demonstrated by some numerical examples.

Keywords

References

  1. Balan, T.A., Spacone, E. and Kwon, M. (2001), "3D hypoplastic model for cyclic analysis of concrete structures", Eng. Struct., 23(4), 333-342. https://doi.org/10.1016/S0141-0296(00)00048-1
  2. Bazant, Z.P. and Jirasek, M. (2002), "Nonlocal integral formulations of plasticity and damage: Survey of progress", J. Eng. Mech., 128(11), 1119-1149. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:11(1119)
  3. Bazant, Z.P. and Oh, B.H. (1983), "Crack band theory for fracture of concrete", Mater. Struct., 16(93), 155-177.
  4. Bresler, B. and Scordelis, A.C. (1963), "Shear strength of reinforced concrete beams", ACI J., 60(1), 51-74.
  5. Burns, N.H. and Siess, C.P. (1962), "Load-deformation characteristics of beam-column connections in reinforced concrete", Report No. SRS 234, University of Illinois, Urbana.
  6. Carol, I. and Murcia, J. (1989), "Nonlinear time-dependent analysis of planar frames using an 'exact' formulation. I. Theory", Comput. Struct., 33(1), 79-87. https://doi.org/10.1016/0045-7949(89)90131-4
  7. Cervenka, J., Bazant, Z.P. and Wierer, M. (2005), "Equivalent localization element for crack band approach to mesh-sensitivity in microplane model", Int. J. Numer. Meth. Eng., 62(5), 700-726. https://doi.org/10.1002/nme.1216
  8. Cervenka, V., Pukl, R., Ozbolt, J. and Eligehausen, R. (1995), "Mesh sensitivity effects in smeared finite element analysis of concrete fracture", FRAMCOS 2, 1387-1396.
  9. Clough, R.W. and Gidwani, J. (1976), "Reinforced concrete frame 2: Testing and analytical correlation", Report No. EERC 76/15, Earthquake Engineering Research Centre, University of California, Berkeley.
  10. Crisfield, M.A. and Wills, J (1989), "Analysis of R/C panels using different concrete models", J. Eng. Mech., 115(3), 578-597. https://doi.org/10.1061/(ASCE)0733-9399(1989)115:3(578)
  11. Darwin, D. and Pecknold, D.A.W. (1974), "Inelastic model for cyclic biaxial loading of reinforced concrete", Civil Engineering Studies, Structural Research Series (University of Illinois at Urbana-Champaign, Department of Civil Engineering), No. 409, P.169.
  12. De Borst, R. (2003), "Numerical aspects of cohesive-zone models", Eng. Fract. Mech., 70(14), 1743-1757. https://doi.org/10.1016/S0013-7944(03)00122-X
  13. Foster, S.J. (1992), "The structural behaviour of reinforced concrete deep beams", PhD Dissertation, University of NewSouth Wales, Australia.
  14. He, W., Wu, Y.F., Liew, K.M. and Wu, Z. (2006), "A 2D total strain based constitutive model for predicting the behaviors of concrete structures", Int. J. Eng. Sci., 44(18-19), 1280-1303. https://doi.org/10.1016/j.ijengsci.2006.07.007
  15. Kupfer, H., Hilsdorf, H.K. and Rusch, H. (1969), "Behaviour of concrete under biaxial stress", ACI J., 66(8), 656-666.
  16. Low, S.S. and Moehle, J.P. (1987), "Experimental study of reinforced concrete columns subjected to multi-axial cyclic loading", Report No. EERC 87/14, Earthquake Engineering Research Centre, University of California, Berkeley.
  17. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  18. Markeset, G. and Hillerborg, A. (1995), "Softening of concrete in compression-localization and size effects", Cement Concrete Res., 25(4), 702-708. https://doi.org/10.1016/0008-8846(95)00059-L
  19. Neuenhofer, A. and Filippou, F.C. (1997), "Evaluation of nonlinear frame finite-element models", J. Struct. Eng., 123(7), 958-966. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:7(958)
  20. Neuenhofer, A. and Filippou, F.C. (1998), "Geometrically nonlinear flexibility-based frame finite element", J. Struct. Eng., 124(6), 704-711. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:6(704)
  21. Park, J.W. and Kim, S.E. (2008), "Nonlinear inelastic analysis of steel-concrete composite beam-columns using the stability functions", Struct. Eng. Mech., 30(6), 763-785. https://doi.org/10.12989/sem.2008.30.6.763
  22. Petrangeli, M., Pinto, P.E. and Ciampi, V. (1999), "Fibre element for cyclic bending and shear of RC structures. I: theory", J. Eng. Mech., 125(9), 994-1001. https://doi.org/10.1061/(ASCE)0733-9399(1999)125:9(994)
  23. Sezen, H. (2008), "Shear deformation model for reinforced concrete columns", Struct. Eng. Mech., 28(1), 39-52. https://doi.org/10.12989/sem.2008.28.1.039
  24. Shuraim, A.B. (2001), "Variable layering system for nonlinear analysis of reinforced concrete plane frames", Struct. Eng. Mech., 11(1), 17-34. https://doi.org/10.12989/sem.2001.11.1.017
  25. Taylor, R.L., Filippou, F.C., Saritas, A. and Auricchio, F. (2003), "A mixed finite element method for beam and frame problems", Comput. Mech., 31(1-2), 192-203. https://doi.org/10.1007/s00466-003-0410-y
  26. Valipour, H.R. and Foster, S.J. (2010), "A Total secant flexibility-based formulation for frame elements with physical and geometrical nonlinearities", Finite Elem. Anal. Des., 46(3), 288-297. https://doi.org/10.1016/j.finel.2009.11.002
  27. Vecchio, F.J. and Collins, M.P. (1988), "Predicting the response of reinforced concrete beams subjected to shear using modified compression field theory", ACI Struct. J., 85(3), 258-268.
  28. Yun, G.J., Harmon, T.G., Dyke, S.J. and So, M. (2008), "A total strain-based hysteretic material model for reinforced concrete structures: Theory and verifications", Comput. Concrete, 5(3), 217-241. https://doi.org/10.12989/cac.2008.5.3.217

Cited by

  1. Analysis of RC walls with a mixed formulation frame finite element vol.12, pp.4, 2013, https://doi.org/10.12989/cac.2013.12.4.519
  2. Numerical modelling of timber/timber–concrete composite frames with ductile jointed connection vol.19, pp.2, 2016, https://doi.org/10.1177/1369433215624600
  3. A simple strategy for constitutive modelling of timber vol.53, 2014, https://doi.org/10.1016/j.conbuildmat.2013.11.100