DOI QR코드

DOI QR Code

Intelligent fuzzy weighted input estimation method for the input force on the plate structure

  • Lee, Ming-Hui (Department of Civil Engineering, Republic of China Military Academy) ;
  • Chen, Tsung-Chien (Department of Power Vehicle and Systems Engineering, Chung Cheng Institute of Technology, National Defense University)
  • 투고 : 2008.06.24
  • 심사 : 2009.10.16
  • 발행 : 2010.01.10

초록

The innovative intelligent fuzzy weighted input estimation method which efficiently and robustly estimates the unknown time-varying input force in on-line is presented in this paper. The algorithm includes the Kalman Filter (KF) and the recursive least square estimator (RLSE), which is weighted by the fuzzy weighting factor proposed based on the fuzzy logic inference system. To directly synthesize the Kalman filter with the estimator, this work presents an efficient robust forgetting zone, which is capable of providing a reasonable compromise between the tracking capability and the flexibility against noises. The capability of this inverse method are demonstrated in the input force estimation cases of the plate structure system. The proposed algorithm is further compared by alternating between the constant and adaptive weighting factors. The results show that this method has the properties of faster convergence in the initial response, better target tracking capability, and more effective noise and measurement bias reduction.

키워드

참고문헌

  1. Bogler, P.L. (1987), "Tracking a maneuvering target using input estimation", IEEE T. Aero. Elec. Sys., AES-23(3), 298-310. https://doi.org/10.1109/TAES.1987.310826
  2. Chan, Y.T., Hu, A.G.C. and Plant, J.B. (1979), "A Kalman filter based tracking scheme with input estimation", IEEE T. Aero. Elec. Sys., AES-15(2), 237-244. https://doi.org/10.1109/TAES.1979.308710
  3. Chen, T.C. and Lee, M.H. (2008), "Inverse active wind load inputs estimation of the multilayer shearing stress structure", Wind Struct., 11(1), 19-33. https://doi.org/10.12989/was.2008.11.1.019
  4. Dawe, D.J. (1984), Matrix and Finite Element Displacement Analysis of Structures, New York.
  5. Deng, S.G. and Heh, T.Y. (2006), "The study of structural system dynamic problems by recursive estimation method", Int. J. Adv. Manuf. Tech., 30(3-4), 195-202. https://doi.org/10.1007/s00170-005-0077-y
  6. Doyle, J.F. (1987), "Determining the contact force during the transverse impact of plates", Exp. Mech., 27(1), 68-72. https://doi.org/10.1007/BF02318866
  7. Doyle, J.F. (1994), "A genetic algorithm for determining the location of structural impacts", Exp. Mech., 34(1), 37-44. https://doi.org/10.1007/BF02328440
  8. Hollandsworth, P.E. and Busby, H.R. (1989), "Impact force identification using the general inverse technique", Int. J. Impact Eng., 8(4), 315-322. https://doi.org/10.1016/0734-743X(89)90020-1
  9. Huang, C.H. (2001), "An inverse nonlinear force vibration problem of estimating the external forces in A damped system with time-dependent system parameters", J. Sound Vib., 242(5), 749-765. https://doi.org/10.1006/jsvi.2000.3196
  10. Ji, C.C. and Liang, C. (2000), "A study on an estimation method for applied force on the rod", Comput. Meth. Appl. Mech. Eng., 190(8-10), 1209-1220. https://doi.org/10.1016/S0045-7825(99)00475-2
  11. Ji, C.C., Ay, S. and Liang, C. (2001), "A study on an estimation technique for the transverse impact of plates", Int. J. Numer. Meth. Eng., 50(3), 579-593. https://doi.org/10.1002/1097-0207(20010130)50:3<579::AID-NME36>3.0.CO;2-G
  12. Lee, M.H. and Chen, T.C. (2008), "Blast load input estimation of the medium girder bridge using inverse method", Defence Sci. J., 58(1), 46-56. https://doi.org/10.14429/dsj.58.1622
  13. Liu, J.J., Ma, C.K., Kung, I.C. and Lin, D.C. (2000), "Input force estimation of a cantilever plate by using a system identification technique", Comput. Meth. Appl. Mech. Eng., 190(11), 1309-1322. https://doi.org/10.1016/S0045-7825(99)00465-X
  14. Ma, C.K. and Ho, C.C. (2004), "An inverse method for the estimation of input forces acting on non-linear structural systems", J. Sound Vib., 275(3-5), 953-971. https://doi.org/10.1016/S0022-460X(03)00797-1
  15. Ma, C.K., Chang, J.M. and Ho, C.C. (2003), "Estimating input forces of plate structures by an inverse method", J. Taiwan Soc. Naval Architects Marine Engineers, 22(3), 123-132.
  16. Ma, C.K., Chang, J.M. and Lin, D.C. (2003), "Input forces estimation of beam structures by an inverse method", J. Sound Vib., 259(2), 387-407. https://doi.org/10.1006/jsvi.2002.5334
  17. Martin, M.T. and Doyle, J.F. (1996), "Impact force identification from wave propagation responses", Int. J. Impact Eng., 18(1), 65-77. https://doi.org/10.1016/0734-743X(95)00022-4
  18. Martin, M.T. and Doyle, J.F. (1996), "Impact force location in frame structures", Int. J. Impact Eng., 18(1), 79- 97. https://doi.org/10.1016/0734-743X(95)00016-9
  19. Tuan, P.C. and Hou, W.T. (1998), "Adaptive robust weighting input estimation method for the 1-D inverse heat conduction problem", Numer. Heat Tr. B - Fund, 34, 439-456. https://doi.org/10.1080/10407799808915067
  20. Tuan, P.C., Fong, L.W. and Huang, W.T. (1996), "Analysis of on-line inverse heat conduction problems", J. Chung Cheng Institute Tech., 25(1), 59-73.
  21. Tuan, P.C., Ji, C.C., Fong, L.W. and Huang, W.T. (1996), "An input estimation approach to on-line twodimensional inverse heat conduction problems", Numer. Heat Tr. B - Fund., 29, 345-363. https://doi.org/10.1080/10407799608914986
  22. Tuan, P.C., Lee, S.C. and Hou, W.T. (1997), "An efficient on-line thermal input estimation method using Kalman Filter and recursive least square algorithm", Inverse Probl. Eng., 5(4), 309-333. https://doi.org/10.1080/174159797088027665
  23. Wang, L.X. (1994), Adaptive Fuzzy Systems and Control: Design and Stability Analysis, Prentice-Hall, Englewood Cliffs, NJ.
  24. Wang, M.L. and Kreitinger, T.J. (1994), "Identification of force from response data of a nonlinear system", Soil Dyn. Earthq. Eng., 13, 267-280. https://doi.org/10.1016/0267-7261(94)90031-0

피인용 문헌

  1. Online estimation of noise parameters for Kalman filter vol.47, pp.3, 2013, https://doi.org/10.12989/sem.2013.47.3.361
  2. INVERSE DYNAMIC INPUT ESTIMATION OF A SEISMIC SOIL–STRUCTURE INTERACTION SYSTEM vol.06, pp.04, 2014, https://doi.org/10.1142/S1758825114500409
  3. A Study on an Inverse Estimation Method for Solving Soil-Structure Interaction System vol.255-260, pp.1662-8985, 2011, https://doi.org/10.4028/www.scientific.net/AMR.255-260.2891
  4. Kalman filter-based force estimation in a clamped plate using reduced order model and noisy measurements pp.1741-5985, 2018, https://doi.org/10.1080/17415977.2018.1503657
  5. Estimation of structure system input force using the inverse fuzzy estimator vol.37, pp.4, 2010, https://doi.org/10.12989/sem.2011.37.4.351
  6. Application of the ANFIS model in deflection prediction of concrete deep beam vol.45, pp.3, 2010, https://doi.org/10.12989/sem.2013.45.3.323
  7. Identification of moving loads using a local linear embedding algorithm vol.25, pp.11, 2019, https://doi.org/10.1177/1077546319833137