Corrosion Science and Technology

  • 제9권2호
  • /
  • Pages.81-86
  • /
  • 2010
  • /
  • 1598-6462(pISSN)
  • /
  • 2288-6524(eISSN)
한국부식방식학회 (The Corrosion Science Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

CMnAl TRIP Steel Surface Modification During CGL Processing

  • Gong, Y.F. (Materials Design Laboratory, Graduate Institute of Ferrous Technology, Pohang University of Science and Technology) ;
  • Lee, Y.R. (Materials Design Laboratory, Graduate Institute of Ferrous Technology, Pohang University of Science and Technology) ;
  • Kim,, Han-S. (Materials Design Laboratory, Graduate Institute of Ferrous Technology, Pohang University of Science and Technology) ;
  • Cooman, B.C.De (Materials Design Laboratory, Graduate Institute of Ferrous Technology, Pohang University of Science and Technology)
  • 투고 : 2008.08.03
  • 심사 : 2010.03.28
  • 발행 : 2010.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The mechanisms of selective oxidation of intercritically annealed CMnAl TRIP steels in a Continuous Galvanizing Line (GCL) were studied by cross-sectional observation of the surface and sub-surface regions by means of High Resolution Transmission Electron Microscopy (HR-TEM). The selective oxidation and nitriding of an intercritically annealed CMnAl TRIP steel in a controlled dew point 10%$H_2+N_2$ atmosphere resulted in the formation of c-xMnO.$MnO_2$ (1${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) particles on the steel surface. Single crystal c-xMnO.$SiO_2$ ($2{\leq}x{\leq}4$) oxide particles were also observed on the surface. A thin film of crystalline c-xMnO.$SiO_2$ (2${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) was present between these particles. In the sub-surface region, internal oxidation, nitriding and intermetallic compound formation were observed. In the first region, large crystalline c-xMnO.$SiO_2$ ($1{\geq}x{\geq}2$) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) oxides particles were present. In the second region, c-AlN particles were observed, and in a third region, small $MnAl_x$ (x>1) intermetallic compound particles were observed.

키워드

참고문헌

  1. B. C. De Cooman, Curro Opin. Solid State Mater. Sci., 8, 285 (2004). https://doi.org/10.1016/j.cossms.2004.10.002
  2. J. Mahieu, S. Claessens. and B. C. De Cooman, Metall. and Mater. Trans. A, 32A, 2905 (2001).
  3. J. Mahieu, S. Claesscns. B. C. De Cooman. and F. Goodwin, Proceedings or the 6th International Conrerence on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech), M.A. Baker Editor, Association for Iron and Steel Technology, p. 529, Chicago, Illinois, (2004).
  4. C. Ramadeva Shastry, John A. Rotole, and Thomas W. Kaiser, Proceedings of the 7th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech). Association for Iron and Steel Technology, p. 403, Osaka, Japan, (2007).
  5. B.R. Strohmeier and D. M. Hercules, J. Phys. Chem ., 88, 4922 (1984). https://doi.org/10.1021/j150665a026
  6. E.M. Bellhouse, A.I.M. Mertens, and J.R. McDennid, Mater. Sci. Eng. A, 463, 147 (2007). https://doi.org/10.1016/j.msea.2006.09.117
  7. X. Vanden Eynde, J. P. Servais, and M. Lamberigts, Surf. and Inter. Ana., 35, 1004 (2003). https://doi.org/10.1002/sia.1639
  8. Y.F. Gong, S. Birosca, Han S. Kim, and B. C. De Cooman, J. Microscopy, 230, 424 (2008). https://doi.org/10.1111/j.1365-2818.2008.02002.x
  9. Y.F. Gong, Han S. Kim, and B. C. De Cooman, ISIJ Int. , 48, 1745 (2008). https://doi.org/10.2355/isijinternational.48.1745
  10. Y.F. Gong, Han S. Kim. and B. C. De Cooman, ISIJ lnt., 49, 557 (2009). https://doi.org/10.2355/isijinternational.49.557
  11. D. Huin, P. Flauder, and J. B. Leblond, Oxidation of Metals, 64, 132 (2005).
  12. C. Wagner, Z. Elektrochcmie, 63, 772 (1959).
  13. J. Mahieu, Doctoral Thesis. p. 79, Ghent University, Ghent, Belgium (2006).