DOI QR코드

DOI QR Code

Model Cut-edge Formed on Zinc Coated Steels by Laser Machining and Its Corrosion Behavior

  • Sakairi, Masatoshi (Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University) ;
  • Kageyama, Akihiro (Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University) ;
  • Kikuhchi, Tatsuya (Division of Materials Science and Engineering, Graduate School of Engineering, Hokkaido University)
  • Received : 2009.07.28
  • Accepted : 2010.02.20
  • Published : 2010.02.01

Abstract

Laser machining technique, which is used focusing pulse YAG laser beam irradiation was applied to form area ratio controlled model cut-edge on pre painted Zn coated steels. A corrosion behavior of formed model cut-edge was investigated by rest potential measurement in 1 mol $m^{-3}$ NaCl with and without 0.5 kmol $m^{-3}$ $H_3BO_4$/0.05kmol$m^{-3}$ $Na_2B_4O_7$. The rest potential showed almost constant value with fluctuations. The amplitude of fluctuations increased with exposed area of steel surface. White corrosion products of zinc oxide and simonkollite was formed after the experiments at the formed model cut-edge.

Keywords

References

  1. The Iron and Steel Institute of Japan, Research Report for Fundamentals of Corrosion Protection and Evaluation Methods on Zinc Alloy Coated Steels, Tokyo (2005).
  2. X. G. Zhang, Corrosion and Eletro-chemistry of Zinc, Plenum Press, New York (1996).
  3. H. E. Townsend and J. G. Zoccola, Material Paformance, 18, 13 (1979).
  4. H. Shindo, K. Nishimura, and K. Kato, Proc. of Galvatech, 98, 433 (1998).
  5. S. Fujita, M. Yoshida, T. Odajima, T. Kanemaru, and Y. Shindo, Tetsu to Hagane, 81, 54 (1995).
  6. G. A. EI-Mahdy, A. Nishikata, and T. Tsuru, Corros. Sci., 42, 183 (2000). https://doi.org/10.1016/S0010-938X(99)00057-8
  7. R. Lindstrom, J. E. Svensson, and L. G. Jahnsson, J. Electrochem. Soc., 147, 1751 (2000). https://doi.org/10.1149/1.1393429
  8. M.Sakairi, Y. Uchida, and H. Takahashi, ISIJ Int., 46, 1218 (2006). https://doi.org/10.2355/isijinternational.46.1218
  9. M. Sakairi, Y. Uchida, and H. Takahashi, Corros. Sci., 49, 2362 (2007). https://doi.org/10.1016/j.corsci.2006.10.034
  10. The Iron and Steel Institute of Japan, Research Report for CutEdge Corrosion Mechanism and Life Predictions of Pre Painted Steel Sheets for Residential Use, Tokyo (2009).
  11. T. Ohtsuka and Y. Abe, Proc. of GALVATEC07 (2007) 648.