DOI QR코드

DOI QR Code

PIV기법을 이용한 레이저프린터의 유동 분포 분석

Analysis of Flow Distribution for Laser Printer Using PIV Technique

  • 김승배 (성균관대학교 대학원 기계공학과) ;
  • 이수홍 (성균관대학교 대학원 기계공학과) ;
  • 김태규 (삼성전자 프린터 사업부) ;
  • 이호렬 (삼성전자 프린터 사업부) ;
  • 고한서 (성균관대학교 기계공학부)
  • 투고 : 2010.08.27
  • 심사 : 2010.09.06
  • 발행 : 2010.09.30

초록

Thermal flows inside a laser printer are affected by generated heat from a fuser and boards. Thus, the effect of fans has been investigated to control the thermal flows and behaviors of toners. In order to analyze the phenomena experimentally, a PIV (Particle Image Velocimetry) has been used, and then the flow inside the printer has been predicted by the CFD (Computational Fluid Dynamics) in this study to determine the efficient flow distribution by an optimum design of the printer. The determined optimum design has been confirmed by the developed PIV technique so that the efficiency of the laser printer can be improved by the proposed design.

키워드

참고문헌

  1. Gil. S. K, Geon. S. H, Lee. C. R and Hwang. H. G, Park. H. G, 1985, “A study on the high speed laser printer system”, Proceedings of IEEK, Vol. 8, No. 1, pp. 474-477.
  2. Choi. J. C, Cho. S. H and Nam. Y. S, Lee. I. S, 2001, “PIV Analysis of the Flow Inside a home refrigerator and the design of a higher efficiency cooling duct”, Proceedings of KSME, Autumn conference, pp. 405-409.
  3. Raffel. M, Willert. C. E and Kompenhans. J, 2007, “Particle image Velocimetry A practical guide”, Springer, pp. 13-102.
  4. Keane. R. D and Adrian. R. J, 1992, “Theory of cross-correlation analysis of PIV images”, Applied scientific research, Vol. 49, pp.191-215. https://doi.org/10.1007/BF00384623
  5. Adrian. R. J, 1991, “Particle-imaging techniques for experimental fluid mechanics”, Ann. Rev. J. Fluid Mech., Vol. 23, pp. 261-304. https://doi.org/10.1146/annurev.fl.23.010191.001401
  6. Kim. Y. H, 1996, “A study on PIV measurement by correlation method”, Master thesis of Korea Maritime University.
  7. Anflux, 2009, “ANSYS ICEM CFD Basic training”, Anflux
  8. Anflux, 2009, “ANSYS Fluent training”, Anflux
  9. White, F. M., 2007, Fluid mechanics, McGraw-Hill, pp. 163-189.