References
- M. P. Manahan, A. S. Argon, O. K. Harling, 1981, The development of a miniaturizeddisk bend test for the determination of postirradiation mechanical properties, J. Nucl. Mater., Vol.104, pp. 1545-1550. https://doi.org/10.1016/0022-3115(82)90820-0
- S.Tettamanti, R. Crudeli, 1998, Small Punch Creep Test: A promising methodology for high temperature plant components life evaluation, BALTICA VI Plant Maintenance for Managing Life & Performance, Vol.2, pp. 501-516.
- T. K. Park, Y. W. Ma, K. B. Yoon, I. S. Jeong, 2001, Assessment of material properties using finite element analysis for small punch creep testing, KSME Conf. Proc. A, pp. 511-516.
- Y. W. Ma, T. G. Park, S. H. Shim, I. S. Jeong, K. B. Yoon, 2002, A Study on applicability of SP creep testing for measurement of creep properties of pressure tube alloy, KSME Conf. Proc. A, pp. 511-516.
- S. I. Lee, S. S. Baek, I. H. K, H. S. Yu, 2002, A study on stress analysis of small punch-creep test and Its Experimental Correlations with uniaxial-creep Test, Trans. Kor. Soc. Mech. Eng. A, Vol. 26, No.12, pp. 2265-2573.
- P. Dymacek, K. Milicka, 2009, Creep small-punch testing and its numerical simulations, Mater. Sci. Eng. A, 510-511, pp. 444-449. https://doi.org/10.1016/j.msea.2008.06.053
- F. Dobes, K. Milicka, 2009, Application of creep Small punch testing in assessment of creep lifetime, Mater. Sci. Eng. A, 510-511, pp. 440-443. https://doi.org/10.1016/j.msea.2008.04.087
- M. L. Saucedo-Munoz, S. Komazaki, T. Takahashi, T. Hashida, T. Shoji, 2002, Creep property measurement of service-exposed SUS316 austenitic stainless steel by the small-punch creep-testing technique, J. Mater. Research, No.8, pp. 1945-1953.
- M. Fujita, T. Nakazawa, H. Komatsu, H, Kaguchi, H. Kaneko, H. Ueda, 1996, Effect of Microstructure on Creep Fatigue Properties for Type 316 Austenitic Stainless Steels, Tetsu to Hagane, Vol. 82, No. 6, pp. 538-543. https://doi.org/10.2355/tetsutohagane1955.82.6_538
- John A. Schey, 1984, Tribology in Metalworking; Friction, Lubrication, and Wear, ASM, Metals Park, Ohio, p. 491.
- B. C. Hwang, W. H. Lee, B. Bae, C. Kim, 2008, Process Planning and Die Design for the Super Hot Forging Product, the Piston Crown Used in Marine Engine, Trans. Mater. Process., Vol. 17, No. 8, pp. 600-606. https://doi.org/10.5228/KSPP.2008.17.8.600
- P. C. Zhai, T. Hashida, S. Komazaki, Q. J. Zhang, 2004, Numerical analysis for small punch creep tests by finite-element method, J. Test. Eval., Vol. 32, No. 4, pp. 298-303.
- F. R. Larson, J. J. Miller, 1952, A time temperature relationship for rupture and creep stresses, Trans ASME, Vol.174, pp. 765-781.
- NRIM, 1997, Data sheets on the elevated temperature properties of 9Cr1MoVNb steel tubes for boiler and heat exchangers and 9Cr1MoVNb steel plate for boiler and pressure vessels, Creep Data Sheet No. 43, pp. 11-14.