Abstract
Energy efficiency, low latency and scalability for wireless sensor networks are important requirements, especially, the wireless sensor network consist of a large number of sensor nodes should be minimized energy consumption of each node to extend network lifetime with limited battery power. An efficient algorithm and energy management technology for minimizing the energy consumption at each sensor node is also required to improve transfer rate. Thus, this paper propose no-overlap multi-pass protocol provides for sensor data transmission in the wireless sensor network environment. The proposed scheme should minimize network overhead through reduced a sensor data translation use to searched multi-path and added the multi-path in routing table. Proposed routing protocol may minimize the energy consumption at each node, thus prolong the lifetime of the sensor network regardless of where the sink node is located outside or inside the received signal strength range. To verify propriety proposed scheme constructs sensor networks adapt to current model using the real data and evaluate consumption of total energy.
무선 센서 네트워크에서 에너지 효율성, 전송 지연 그리고 확장성은 중요한 요구사항이며, 특히 다수의 노드로 구성된 무선 센서 네트워크의 경우 네트워크 라이프타임 연장을 위해 제한된 배터리 전력 내에서 각 노드의 에너지 소비를 최소화 시켜야한다. 또한 전송률을 향상시키기 위해서는 각 센서 노드의 에너지 소비를 최소화하기 위한 효율적인 알고리즘과 에너지 관리 기술이 요구된다. 본 논문은 무선 센서 네트워크 환경에서 센서 데이터 전송을 위해 경로의 겹침이 없는 다중경로 프로토콜을 제안한다. 제안한 방법은 다중경로를 검색하고 라우팅 테이블에 다중경로를 추가시켜 센서 데이터 전송의 감소를 통해 네트워크 오버헤드를 최소화 시킨다. 제안한 라우팅 프로토콜은 각 노드의 에너지 소비를 최소화하고, 싱크 노드가 수신 강도 범위 내, 외부에 위치하더라도 센서 네트워크의 생명주기를 연장할 수 있다. 실제 데이터를 이용하여 현실 모델에 맞게 센서 네트워크를 구축하고 제안 기법의 타당성을 검증하며, 전체 에너지의 소비량을 평가한다.