References
- Ardlin BI. Transformation-toughened zirconia for dental inlays, crowns and bridges: chemical stability and effect of low-temperature aging on flexural strength and surface structure. Dent Mater 2002;18:590-5. https://doi.org/10.1016/S0109-5641(01)00095-1
- Sobrinho LC, Cattell MJ, Glover RH, Knowles JC. Investigation of the dry and wet fatigue properties of three all-ceramic crown systems. Int J Prosthodont 1998;11:255-62.
- Campbell SD, Sozio RB. Evaluation of the fit and strength of an all-ceramic fixed partial denture. J Prosthet Dent 1988;59:301- 6. https://doi.org/10.1016/0022-3913(88)90177-1
- Nakamura T, Ohyama T, Imanishi A, Nakamura T, Ishigaki S. Fracture resistance of pressable glass-ceramic fixed partial dentures. J Oral Rehabil 2002;29:951-5. https://doi.org/10.1046/j.1365-2842.2002.00929.x
- Komine F, Tomic M, Gerds T, Strub JR. Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns. J Prosthet Dent 2004;92:359-64. https://doi.org/10.1016/j.prosdent.2004.07.018
- Blatz MB. Long-term clinical success of all-ceramic posterior restorations. Quintessence Int 2002;33:415-26.
- Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25. https://doi.org/10.1016/S0142-9612(98)00010-6
- Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part I. Pressable and alumina glass-infiltrated ceramics. Dent Mater 2004;20:441-8. https://doi.org/10.1016/j.dental.2003.05.003
- Fisher RM, Moore BK, Swartz ML, Dykema RW. The effects of enamel wear on the metal-porcelain interface. J Prosthet Dent 1983;50:627-31. https://doi.org/10.1016/0022-3913(83)90198-1
- Krejci I, Lutz F, Gautschi L. Wear and marginal adaptation of composite resin inlays. J Prosthet Dent 1994;72:233-44. https://doi.org/10.1016/0022-3913(94)90335-2
- Krejci I, Mueller E, Lutz F. Effects of thermocycling and occlusal force on adhesive composite crowns. J Dent Res 1994;73:1228- 32. https://doi.org/10.1177/00220345940730061501
- DeLong R, Sakaguchi RL, Douglas WH, Pintado MR. The wear of dental amalgam in an artificial mouth: a clinical correlation. Dent Mater 1985;1:238-42. https://doi.org/10.1016/S0109-5641(85)80050-6
- Sakaguchi RL, Douglas WH, DeLong R, Pintado MR. The wear of a posterior composite in an artificial mouth: a clinical correlation. Dent Mater 1986;2:235-40. https://doi.org/10.1016/S0109-5641(86)80034-3
- Krejci I, Lutz F. In vitro evaluation of two composite material for posterior restorations. Stomatol DDR 1990;40:326-32.
- De Gee AJ, Pallav P, Davidson CL. Effect of abrasion medium on wear of stress-bearing composites and amalgam in vitro. J Dent Res 1986;65:654-8. https://doi.org/10.1177/00220345860650050401
- Sulong MZ, Aziz RA. Wear of materials used in dentistry: a review of the literature. J Prosthet Dent 1990;63:342-9. https://doi.org/10.1016/0022-3913(90)90209-U
- DeLong R, Sasik C, Pintado MR, Douglas WH. The wear of enamel when opposed by ceramic systems. Dent Mater 1989;5:266- 71. https://doi.org/10.1016/0109-5641(89)90073-0
- Harrison A. Wear of combinations of acrylic resin and porcelain, on an abrasion testing machine. J Oral Rehabil 1978;5:111-5. https://doi.org/10.1111/j.1365-2842.1978.tb01202.x
- Mahalick JA, Knap FJ, Weiter EJ. Occusal wear in prosthodontics. J Am Dent Assoc 1971;82:154-9. https://doi.org/10.14219/jada.archive.1971.0018
- Gallegos LI, Nicholls JI. In vitro two-body wear of three veneering resins. J Prosthet Dent 1988;60:172-8. https://doi.org/10.1016/0022-3913(88)90310-1
- Seghi RR, Rosenstiel SF, Bauer P. Abrasion of human enamel by different dental ceramics in vitro. J Dent Res 1991;70:221- 5. https://doi.org/10.1177/00220345910700031301
- Coornaert J, Adriaens P, De Boever J. Long-term clinical study of porcelain-fused-to-gold restorations. J Prosthet Dent 1984;51:338-42. https://doi.org/10.1016/0022-3913(84)90217-8
- Wiley MG. Effects of porcelain on occluding surfaces of restored teeth. J Prosthet Dent 1989;61:133-7. https://doi.org/10.1016/0022-3913(89)90360-0
- Oh WS, Delong R, Anusavice KJ. Factors affecting enamel and ceramic wear: a literature review. J Prosthet Dent 2002;87:451- 9. https://doi.org/10.1067/mpr.2002.123851
- DeLong R, Douglas WH, Sakaguchi RL, Pintado MR. The wear of dental porcelain in an artificial mouth. Dent Mater 1986;2:214-9. https://doi.org/10.1016/S0109-5641(86)80016-1
Cited by
- Full Zirconia Fixed Detachable Implant-Retained Restorations Manufactured from Monolithic Zirconia: Clinical Report after Two Years in Service vol.20, pp.7, 2011, https://doi.org/10.1111/j.1532-849X.2011.00784.x
- Two-body wear of dental porcelain and substructure oxide ceramics vol.16, pp.3, 2012, https://doi.org/10.1007/s00784-011-0589-9
- Influence of Full-Contour Zirconia Surface Roughness on Wear of Glass-Ceramics vol.23, pp.3, 2013, https://doi.org/10.1111/jopr.12088
- Maxillary cement retained implant supported monolithic zirconia prosthesis in a full mouth rehabilitation: a clinical report vol.5, pp.2, 2013, https://doi.org/10.4047/jap.2013.5.2.209
- Tooth wear against ceramic crowns in posterior region: a systematic literature review vol.5, pp.4, 2013, https://doi.org/10.1038/ijos.2013.73
- vol.71, pp.3-4, 2013, https://doi.org/10.3109/00016357.2012.696690
- A comparative study of sliding wear of nonmetallic dental restorative materials with emphasis on micromechanical wear mechanisms vol.103, pp.4, 2014, https://doi.org/10.1002/jbm.b.33193
- A Novel Coping Design to Decrease Maximum Principal Stress in Zirconia Ceramic Restorations vol.23, pp.7, 2014, https://doi.org/10.1111/jopr.12147
- In Vitro Wear Behavior of Zirconia Opposing Enamel: A Systematic Review vol.23, pp.8, 2014, https://doi.org/10.1111/jopr.12167
- Wear performance of bovine tooth enamel against translucent tetragonal zirconia polycrystals after different surface treatments vol.33, pp.6, 2014, https://doi.org/10.4012/dmj.2014-097
- 3Y-TZP In-Depth Phase Transformation by Raman Spectroscopy: A Comparison of Three Methods vol.97, pp.7, 2014, https://doi.org/10.1111/jace.12892
- Evaluation of marginal fit of 2 CAD-CAM anatomic contour zirconia crown systems and lithium disilicate glass-ceramic crown vol.7, pp.4, 2015, https://doi.org/10.4047/jap.2015.7.4.271
- Effect of Finishing and Polishing on the Surface Roughness of Four Ceramic Materials after Occlusal Adjustment vol.28, pp.6, 2016, https://doi.org/10.1111/jerd.12222
- Evaluation of marginal and internal gap under model-free monolithic zirconia restoration fabricated by digital intraoral scanner vol.54, pp.3, 2016, https://doi.org/10.4047/jkap.2016.54.3.210
- Effects of different surface finishing procedures on the change in surface roughness and color of a polymer infiltrated ceramic network material vol.8, pp.1, 2016, https://doi.org/10.4047/jap.2016.8.1.16
- Wear of primary teeth caused by opposed all-ceramic or stainless steel crowns vol.8, pp.1, 2016, https://doi.org/10.4047/jap.2016.8.1.43
- A Study on Topographical Properties and Surface Wettability of Monolithic Zirconia after Use of Diverse Polishing Instruments with Different Surface Coatings pp.1059941X, 2018, https://doi.org/10.1111/jopr.12515
- Zirconia ceramics in metal-free implant dentistry vol.116, pp.3, 2017, https://doi.org/10.1080/17436753.2016.1264537
- Fatigue behaviours of the zirconia dental restorations prepared by two manufacturing methods vol.116, pp.7, 2017, https://doi.org/10.1080/17436753.2017.1336365
- Dental ceramics: a review of new materials and processing methods vol.31, pp.suppl 1, 2017, https://doi.org/10.1590/1807-3107bor-2017.vol31.0058
- Polishing of Monolithic Zirconia Crowns—Results of Different Dental Practitioner Groups vol.5, pp.4, 2017, https://doi.org/10.3390/dj5040030
- Wear Evaluation of Prosthetic Materials Opposing Themselves vol.43, pp.1, 2018, https://doi.org/10.2341/16-212-L
- Surface Properties of Dental Zirconia after Clinical Grinding and Polishing vol.529-530, pp.1662-9795, 2012, https://doi.org/10.4028/www.scientific.net/KEM.529-530.501
- Development of a Novel Biomimetic Dental Wear System vol.15, pp.1662-100X, 2012, https://doi.org/10.4028/www.scientific.net/JBBTE.15.23
- Comparative evaluation of surface roughness of posterior primary zirconia crowns pp.1996-9805, 2018, https://doi.org/10.1007/s40368-018-0382-4
- Assessment of Antagonist Enamel Wear and Clinical Performance of Full-Contour Monolithic Zirconia Crowns: One-Year Results of a Prospective Study pp.1059941X, 2018, https://doi.org/10.1111/jopr.12960
- The effect of abrading and cutting instruments on machinability of dental ceramics vol.29, pp.3, 2018, https://doi.org/10.1007/s10856-018-6031-y
- Mica glass ceramics for dental restorations pp.1753-5557, 2018, https://doi.org/10.1080/10667857.2018.1494240
- Effects of Polishing Bur Application Force and Reuse on Sintered Zirconia Surface Topography vol.43, pp.4, 2018, https://doi.org/10.2341/17-105-LR
- Grinding and polishing efficiency of a novel self-glazed zirconia versus the conventional dry-pressed and sintered zirconia ceramics pp.1743-6761, 2019, https://doi.org/10.1080/17436753.2018.1472904
- Marginal Adaptation of CAD/CAM All-Ceramic Crowns Made by Different Impression Methods: A Literature Review pp.1059941X, 2019, https://doi.org/10.1111/jopr.12800
- Artificial Enamel Wear after Prolonged Chewing Simulation against Monolithic Y-TZP Crowns vol.09, pp.04, 2018, https://doi.org/10.4236/msa.2018.94026
- Zirconia, is It the Next Change in Esthetic Dentistry? vol.2, pp.4, 2010, https://doi.org/10.5005/ijoprd-2-4-v
- Zirconia, is It the Next Change in Esthetic Dentistry? vol.2, pp.4, 2010, https://doi.org/10.5005/ijoprd-2-4-v
- Three-Dimensional Finite Element Analysis of Lower Molar Tooth Restored with Fully Milled and Layered Zirconia Crowns vol.1, pp.4, 2014, https://doi.org/10.15406/jdhodt.2014.01.00022
- Esthetic Prosthetic Restorations: Reliability and Effects on Antagonist Dentition vol.9, pp.None, 2010, https://doi.org/10.2174/1874210601509010473
- Fracture Strength of Aged Monolithic and Bilayer Zirconia-Based Crowns vol.2015, pp.None, 2010, https://doi.org/10.1155/2015/418641
- An overview of monolithic zirconia in dentistry vol.30, pp.4, 2010, https://doi.org/10.1080/13102818.2016.1177470
- 외인성 및 내인성 요인에 의한 치아부식에 대한 치료 증례 vol.33, pp.1, 2010, https://doi.org/10.14368/jdras.2017.33.1.42
- Microleakage and penetration depth of different fissure sealant materials after cyclic thermo-mechanic and brushing simulation vol.37, pp.1, 2010, https://doi.org/10.4012/dmj.2016-234
- Evaluation of hardness and wear of surface treated zirconia on enamel wear. An in-vitro study vol.4, pp.1, 2010, https://doi.org/10.1016/j.fdj.2017.10.001
- Experimental Comparison on Dental BioTribological Pairs Zirconia/Zirconia and Zirconia/Natural Tooth by Using a Reciprocating Tribometer vol.43, pp.4, 2010, https://doi.org/10.1007/s10916-019-1230-8
- Effect of Nano-filled Protective Coating on Microhardness and Wear Resistance of Glass-ionomer Cements vol.46, pp.2, 2010, https://doi.org/10.5933/jkapd.2019.46.2.226
- Tribology and Dentistry: A Commentary vol.7, pp.6, 2010, https://doi.org/10.3390/lubricants7060052
- Wear Characteristics of Dental Ceramic CAD/CAM Materials Opposing Various Dental Composite Resins vol.12, pp.11, 2010, https://doi.org/10.3390/ma12111839
- Simulated occlusal adjustments and their effects on zirconia and antagonist artificial enamel vol.11, pp.3, 2010, https://doi.org/10.4047/jap.2019.11.3.162
- Monolithic Zirconia: An Update to Current Knowledge. Optical Properties, Wear, and Clinical Performance vol.7, pp.3, 2010, https://doi.org/10.3390/dj7030090
- Evolution of Indirect Restorations for Fixed Prosthodontics: Planning, Preparation and Cementation vol.8, pp.3, 2010, https://doi.org/10.1308/205016819827601554
- Surface, Microstructural, and Mechanical Characterization of Prefabricated Pediatric Zirconia Crowns vol.12, pp.20, 2019, https://doi.org/10.3390/ma12203280
- Evaluating the Wear of Resin Teeth by Different Opposing Restorative Materials vol.12, pp.22, 2010, https://doi.org/10.3390/ma12223684
- Surface roughness of two different monolithic materials after chewing simulation vol.12, pp.7, 2010, https://doi.org/10.4103/jioh.jioh_272_19
- Measurement of dental crown wear -In vitro study vol.39, pp.1, 2020, https://doi.org/10.4012/dmj.2018-280
- Suitability of 3D printed pieces of nanocrystalline zirconia for dental applications vol.36, pp.3, 2010, https://doi.org/10.1016/j.dental.2020.01.006
- The application of 3D printed self-glazed zirconia for full-mouth rehabilitation in a patient with severely worn dentition: a case report vol.119, pp.5, 2010, https://doi.org/10.1080/17436753.2019.1666579
- A State-of-the-Art Review on the Wear of the Occlusal Surfaces of Natural Teeth and Prosthetic Crowns vol.13, pp.16, 2010, https://doi.org/10.3390/ma13163525
- Zahnfarbene Werkstoffe für festsitzenden Zahnersatz und ihre Funktion - was wissen wir? vol.129, pp.12, 2010, https://doi.org/10.1055/a-1300-0205
- Effect of ionizing radiation and chewing simulation on human enamel and zirconia vol.65, pp.1, 2010, https://doi.org/10.2186/jpr.jpor_2019_592
- Irradiation therapy and chewing simulation: effect on zirconia and human enamel vol.65, pp.2, 2010, https://doi.org/10.2186/jpr.jpr_d_20_00018
- Ex Vivo Assessment of Natural Teeth Wear against Zirconia and Novel Glass-Fiber-Reinforced Composite Crowns in Primary Teeth by a Three-Dimensional Assessment Method vol.2021, pp.None, 2010, https://doi.org/10.1155/2021/9670982
- Classification and Properties of Dental Zirconia as Implant Fixtures and Superstructures vol.14, pp.17, 2010, https://doi.org/10.3390/ma14174879