References
- 국토해양부 (2009), 구조물기초설계기준 해설, (사)한국지반공학회.
- 박재현, 허정원, 김명모, 곽기석 (2008), "LRFD 설계를 위한 국내 항타강관말뚝의 저항계수 산정", 대한토목학회 논문집, Vol.28, No.6C, pp.367-377.
- 한국건설기술연구원 (2008), LRFD 기초구조물 설계를 위한 저항계수 결정 연구, 건설교통 R&D 정책.인프라사업 3차년도 최종 연구보고서, 국토해양부.
- (사)한국지반공학회 (1997), 지반조사 결과의 해석 및 이용, 지반공학시리즈 1, 도서출판 구미서관.
- Allen, TM (2005), "Development of Geotechnical Resistance Factors and Downdrag Load Factors for LRFD Foundation Strength Limit State Design", Publication No. FHWA-NHI-05-052, Federal Highway Administration, U.S. Department of Transportation.
- American Association of State Highway and Transportation Official (AASHTO) (2007), AASHTO LRFD Bridge Design Specifications Fourth Edition. AASHTO, Washington DC.
- Ang, A.H.-S. and Tang, W.H. (1975), Probability Concepts in Engineering Planning and Design. Vol. I, Basic Principles, John Wiley & Sons, New York.
- Bolduc, L.C., Gardoni, P., and Briaud, J.-L. (2008), "Probabilisty of exceedance estimates for scour depth around bridge piers", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.134, No.2, pp.175-184. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:2(175)
- Cetin, K.O. and Ozan, C. (2009), "CPT-Based probabilistic soil characterization and classification", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.135, No.1, pp.84-107. https://doi.org/10.1061/(ASCE)1090-0241(2009)135:1(84)
- Davisson, M. (1972), "High Capacity Piles", Proceedings of Soil Mechanics Lecture Series on Innovations in Foundation Construction, ASCE, Illinois Section, Chicago, IL, pp.82-112.
- Goh, A.T.C., Kulhawy, F.H., and Chua, C.G. (2005), "Bayesian neural network analysis of undrained side resistance of drilled shafts", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.131, No.1, pp.84-93. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:1(84)
- Hansell, WC and Viest, IM (1971), "Load factor design for steel highway bridges", Engineering Journal of AISC, Vol.18, No.4, pp.113-123.
- Honjo, Y., Liu, W.-T., and Guha, S. (1994), "Inverse analysis of an embankment on soft clay by extended bayesian method", International Journal for Numerical and Analytical Methods in Geomechanics, Vol.18, pp.709-734 https://doi.org/10.1002/nag.1610181004
- Juang, C.H., Fang, S.Y., and Khor, E.H. (2006), "First-order reliability method for probabilistic liquefaction triggering analysis using CPT", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.132, No.3, pp.337-350. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:3(337)
- Kwak, K., Kim, K.J., Huh, J., Park, J.H., Chung, M., and Lee, J.H. (2008), "Target reliability indices of static bearing capacity evaluation of driven steel pipe piles", Proceedings of the 87th Annual Meeting of Transportation Research Board, Transportation Research Board, Washington, D.C. (CD-ROM).
- Kwak, K., Kim, K.J., Huh, J., Lee, J.H., and Park, J.H. (2010), "Reliability Based Calibration of Resistance Factors for Static Bearing Capacity of Driven Steel Pipe Piles", Canadian Geotechnical journal, to be published (accepted in September 2009).
- Li, D.Q., Tang, W.H., and Zhang, L.M. (2008), "Updating occurrence probability and size of defect for bored piles", Structural Safety, Vol.30, pp.130-143. https://doi.org/10.1016/j.strusafe.2006.09.002
- McVay, M.C., Birgisson, B., Nguyen, T., and Kuo, C.L. (2002), "Uncertainty in load and resistance factor design phi factors for driven prestressed concrete piles", Transportation Research Record, No. 1808, Transportation Research Board, Washington, D.C., pp. 99-107.
- McVay, M.C., Birgisson, B., Zhang, L., Perez, A., Putcha, S., and Lee, S.M. (2000), "Load and resistance factor design (LRFD) for driven piles using dynamic methods-A Florida perspective", Geotechnical Testing Journal, Vol.23, No.1, pp.55-66. https://doi.org/10.1520/GTJ11123J
- Meyerhof, G.G. (1976), "Bearing capacity and settlement of pile foundations", Journal of Geotechnical Engineering Division, ASCE, Vol.102, No.GT3, pp.196-228.
- Moss, R.E.S., Seed, R.B., Kayen, R.E., Stewart, J.P., Kiureghian, A.D., and Cetin, K.O. (2006), "CPT-based probabilistic and deterministic assessment of in situ seismic soil liquefaction potential", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.132, No.8, pp.1032-1051. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:8(1032)
- Paikowsky, S.G., Birgisson, B., McVay, M.C., Nguyen, T., Kuo, C.L., Baecher, G., Ayyab, B., Stenersen, K., O'Malley, K., Chernauskas, L., and O'Neill, M. (2004), Load and Resistance Factor Design for Deep Foundations, NCHRP Report 507, Transportation Research Board, Washington, D.C.
- Phoon, K.K., Kulhawy, F.H., and Grigoriu, M.D. (2003), "Development of a reliability-based design framework for transmission line structure foundations", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.129, No.9, pp.798-806. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:9(798)
- Rackwitz, R. and Fiessler, B. (1978), "Structural reliability under combined random load sequences", Computers and Structures, Vol.9, pp.489-494. https://doi.org/10.1016/0045-7949(78)90046-9
- Yan, W.M., Yuen, K.-V., and Yoon, G.L. (2009), "Bayesian probabilistic approach for the correlations of compression index for marine clays", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.135, No.12, pp.1932-1940. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000157
- Zhang, L.L., Tang, W.H., and Zhang, L.M. (2009), "Bayesian model calibration using geotechnical centrifuge tests", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.135, No.2, pp.291-299. https://doi.org/10.1061/(ASCE)1090-0241(2009)135:2(291)
- Zhang, L.L., Zhang, L.M., and Tang, W.H. (2008), "Similarity of soil variability in centifuge models", Canadian Geotechnical journal, Vol.45, No.8, pp.1118-1129. https://doi.org/10.1139/T08-066
- Zhang, L.M. and Tang, W.H. (2002), "Use of load tests for reducing pile length", Proceedings of Deep Foundation 2002, ASCE, Orlando, Florida, pp.993-1005.
- Zhang, L.M., Tang, W.H., Zhang, L.L., and Zhang, J. (2004), "Reducing uncertainty of prediction from empirical correlations", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol.130, No.5, pp.526-534. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:5(526)