References
- Shin, K. B., Lee, J. Y., Lee, S. J., 2007, “A Study on Low-Velocity Impact Characterization of Various Sandwich Panels for the Korean Low Floor Bus Application,” Transactions of the KSME (A), Vol. 31, No. 4, pp. 506-516.
- Hong, S. T., Pan, J., Tyan, T. and Prasad, P., 2006, “Quasi-Static Crush Behavior of Aluminum Honeycombs Specimens Under Compression Dominant Combined Loads,” International Journal of Plasticity, Vol. 22, pp. 73-109. https://doi.org/10.1016/j.ijplas.2005.02.002
- Arcan, M., Hashin, Z. and Voloshin, A., 1978, “A Method to Produce Uniform Plane-Stress States with Applications to Fiber-Reinforced Materials.” Experimental Mechanics, Vol. 18, pp. 141-146. https://doi.org/10.1007/BF02324146
- Papka, S. D. and Kyriakides, S., 1999, “Biaxial Crushing of Honeycombs-Part I: Experiments,” Int. J Solids Struct., Vol. 36, pp. 4367-4396. https://doi.org/10.1016/S0020-7683(98)00224-8
- Papka, S. D. and Kyriakides, S., 1999, “In-Plane Biaxial Crushing of Honeycombs-Part II: Analysis,” Int. J. Solids Struct., Vol. 36, pp. 4397-4423. https://doi.org/10.1016/S0020-7683(98)00225-X
- Gioux, G., McCormack, T. M. and Gibson, L. J., 2000, “Failure of Aluminum Foams Under Multiaxial Loads,” Int. J. Mech. Sci., Vol. 42, pp. 1097–1117.
- Deshpande, V. S. and Fleck, N. A., 2001, “Multi-Axial Yield Behaviour of Polymer Foams,” Acta Mater., Vol. 49, pp. 1859-1866. https://doi.org/10.1016/S1359-6454(01)00058-1
- Chen, C. and Fleck, N. A., 2001, “Size Effects in the Constrained Deformation of Metallic Foams,” J. Mech. Phys. Solids, Vol. 50, pp. 955-977.
- Gdoutos, E. E., Daniel, I. M. and Wang, K.-A., 2002, “Failure of Cellular Foams Under Multiaxial Loading,” Composites: Part A, Vol. 33, pp. 163-176. https://doi.org/10.1016/S1359-835X(01)00110-5
- Hong, S. T., Pan, J., Tyan, T. and Prasad, P., 2002, “Influence of Shear Loads on Crush of Honeycomb Materials,” SAE Technical Paper 2002-01-0683, Society of Automotive Engineers, Warrendale, PA.
- Mohr, D. and Doyoyo, M., 2002, “Analysis of the Arcan Apparatus in the Clamped Configuration,” J. Compos. Mater., Vol. 36, pp. 2583-2594. https://doi.org/10.1177/002199802761405303
- Doyoyo, M. and Mohr, D., 2003, “Microstructural Response of Aluminum Honeycomb to Combined Outof-Pane Loading,” Mechanics of Materials, Vol. 35, pp. 865-876. https://doi.org/10.1016/S0167-6636(02)00308-3
- Hong, S. T., Pan, J., Tyan, T. and Prasad, P., 2003, “Crush Strength of Aluminum 5052-H38 Honeycomb Materials Under Combined Compressive and Shear Loads,” SAE Technical Paper 2003-01-0331, Society of Automotive Engineers, Warrendale, PA, 2003.
- Mohr, D. and Doyoyo, M., 2003, “A New Method for the Biaxial Testing of Cellular Solids,” Experimental Mechanics,Vol. 43, pp. 173-182. https://doi.org/10.1007/BF02410498
- Doyoyo, M. and Wierzbicki, T., 2003, “Experimental Studies on the Yield Behavior of Ductile and Brittle Aluminum Foams,” International Journal of Plasticity, Vol. 19, pp. 1195-1214. https://doi.org/10.1016/S0749-6419(02)00017-7
- Mohr, D. and Doyoyo, M., 2004, “Experimental Investigation on the Plasticity of Hexagonal Aluminum Honeycomb Under Multiaxial Loading,” J. Appl. Mech., Vol. 71, pp. 375-385. https://doi.org/10.1115/1.1683715
- Hong, S. T., Pan, J., Tyan, T. and Prasad, P., 2006, “Quasi-Static Crush Behavior of Aluminum Honeycomb Specimens Under Non-Proportional Compression-Dominant Combined Loads,” International Journal of Plasticity, Vol. 22, pp. 1062-1088. https://doi.org/10.1016/j.ijplas.2005.07.003
- Hong, S. T., Pan, J., Tyan, T. and Prasad, P., 2008, “Dynamic Crush Behaviors of Aluminum Honeycomb Specimens Under Compression Dominant Inclined Loads,” International Journal of Plasticity, Vol. 24, pp. 89-117. https://doi.org/10.1016/j.ijplas.2007.02.003
- O’Connor, D. J., 1989, ”A Comparison of Test Methods for Shear Properties of the Cores of Sandwich Constructions,” Journal of Testing and Evaluation, Vol. 17, pp. 214-246.
- Hong, S. T., Pan, J., Tyan, T. and Prasad, P., 2007, “A Comparision of Two Crush Test Methods for Honeycombs Under Compression and Shear,” Juornal of Testing and Evaluation, Vol. 36, pp. 1-7
- ASTM C 273-00, 2000. Standard test method for shear properties of sandwich core materials. ASTM, Philadelphia, PA.