References
- AspenTech, 2010. HYSYS official homepage, [Onlinge]Available at: http://www.aspentech.com/core/aspen-hysys.cfm [Accessed 1 February 2010].
- Anderson, T.N. et al., 2009. Shipboard Reliquefaction for Large LNG Carriers. Proceeding of the 1st Annual Gas Processing Symposium, Doha, Qatar, January 10-12, 2009, pp.317-322.
- Cengel, Y.A., 2008. Introduction to Thermodynamics and Heat Transfer, 2nd Ed. McGraw-Hill.
- Chung, M.J. Jung, W.S. & Chang, H.M., 2009. Thermal System Design of Brayton Refrigeration Cycle for Production of Subcooled Liquid Nitrogen at 65K. Proceedings of the Annual Spring Meeting, The Korean Society of Mechanical Engineers, Pusan, May 20-22, 2009, pp.231-234.
- Hwang, J.H. et al., 2009. Establishment of Offshore Process FEED(Front End Engineering Design) Method for Oil-based FPSO Topsides Systems. Proceedings of ISOPE(International Society of Offshore and Polar Engineers), Osaka, June 21-26, 2009, pp.144-150.
- Howard, D., 1988. Numerical Techniques for the Simulation of Three Dimensional Swirling Flow, Ph.D. Thesis, University of Wales.
- Jung, H.C. Lim, S.W. & Kim, Y.H., 2006. An Demand Outlook of Offshore Oil Production Structures. The Society of Naval Architects of Korea, 43(1), pp. 49-57.
- Lee, K.Y. Cho, S.H. & Roh, M.I., 2002. An Efficient Global-Local Hybrid Optimization Method Using Design Sensitivity Analysis. International Journal of Vehicle Design, 28(4), pp. 300-317. https://doi.org/10.1504/IJVD.2002.001992
- Merri, A., 1990. An Experimental Study of Heat Transfer in Smooth Circular Tubes Rotating in the Orthogonal Mode, Ph.D. Thesis, University of Wales.
- Rance, J.M., 1989. Flow and Heat Transfer in Rotating Channel. Ph.D. Thesis, University of Wales.
- R-Abadi, K.F., 1993. An Experimental Investigation of the Confined Effect of Rotation and Internal Ribbing on Heat Transfer in Turbine Rotor Blade Cooling Channels. Ph.D. Thesis, University of Wales.
- Shukri, T., 2004. LNG Technology Selection. Hydrocarbon Engineering, 9(2), pp.71-76. https://doi.org/10.1061/(ASCE)1084-0699(2004)9:2(71)
- Smith, J.M., 2005. Introduction to Chemical Engineering Thermodynamics. 7th Ed. McGraw-Hill.
- Venkatarathnam, G., 2008. Cryogenic Mixed Refrigerant Processes. Springer.
- Xia, J.Y., 1987. Numerical Modeling for Turbulent Flow and Heat Transfer in a Coupled Solid/Fluid Rotating System. M.Sc. Thesis, University of Wales.
Cited by
- Determination of the Optimal Operating Condition of Dual Mixed Refrigerant Cycle of LNG FPSO Topside Liquefaction Process vol.49, pp.1, 2012, https://doi.org/10.3744/SNAK.2012.49.1.33
- Multi-floor Layout for the Liquefaction Process Systems of LNG FPSO Using the Optimization Technique vol.49, pp.1, 2012, https://doi.org/10.3744/SNAK.2012.49.1.68
- Reliability Analysis of LNG FPSO Liquefaction Cycle in DEVS Environment vol.18, pp.2, 2013, https://doi.org/10.7315/CADCAM.2013.138
- Determination of Mixing Ratio of Mixed Refrigerants and Performance Analysis of Natural Gas Liquefaction Processes vol.51, pp.6, 2013, https://doi.org/10.9713/kcer.2013.51.6.677
- Optimal Design of Liquefaction Cycles of Liquefied Natural Gas Floating, Production, Storage, and Offloading Unit Considering Optimal Synthesis vol.52, pp.15, 2013, https://doi.org/10.1021/ie301913b