DOI QR코드

DOI QR Code

The Effect of Pressurized Grouting on Pullout Resistance and the Group Effect of Compression Ground Anchor

가압식 압축형 지반앵커의 인발저항력 증대효과 및 군효과 특성

  • Received : 2009.10.15
  • Accepted : 2010.06.25
  • Published : 2010.06.30

Abstract

The purpose of this study is to figure out the effect of pressurized grouting on the pullout resistance and the group effect of the compression ground anchor by performing pilot-scale chamber tests and field tests. The laboratory tests are carried out for 3-types of soils which are abundant in the Korean peninsular. Experimental results showed that the enlargement of anchor diameters estimated from the cavity expansion theory matches reasonable well with that obtained from experiments. Moreover, the required injection time as a function of the coefficient of permeability of each soil type was proposed. A series of in-situ anchor pullout tests were also performed to experimentally figure out the effect of pressurized grouting on the pullout resistance. Experimental results also showed that the effect of the pressurized grouting is more prominent in a softer ground with smaller SPT-N value in all of the following three aspects: increase in anchor diameter; pullout resistance; and surface roughness. The pressurized grouting effect in comparison with gravitational grouting was found to be almost nil if the SPT-N value is more than 50. Based on experimental results, a new equation to estimate the pullout resistance as a function of the SPT-N value was proposed. And based on in-situ group anchor pullout tests results, a new group effect equation was proposed which might be applicable to decomposed residual soils which are abundant in the Korean peninsular.

본 연구는 가압식 압축형 지반앵커의 실내모형 챔버시험, 현장시험을 통해 가압그라우팅이 지반앵커의 인발저항력에 미치는 영향을 고찰하고 현장 군앵커 인발시험을 통해 압축형 지반앵커의 군효과 특성을 규명하는데 그 목적이 있다. 3가지 시료에 대한 실내시험 결과, 가압그라우팅으로 인한 앵커체의 직경 증가량은 시험값과 공동팽창 이론에 의한 값이 대체적으로 일치하였다. 또한 지반의 투수계수에 따른 가압 그라우팅 최소 주입시간을 제안하였다. 현장시험 결과 가압그라우팅으로 인한 앵커체의 직경 증가, 구근 표면 거칠기 증가, 인발저항력 증가의 효과는 SPT-N치가 작은 상대적으로 연약한 지반에서 가압 그라우팅의 효과가 큰 것을 확인할 수 있었다. 또한 SPT-N치가 50이상인 지반에서는 가압그라우팅의 효과를 기대할 수 없는 것을 확인하였다. 현장시험결과를 바탕으로 단위극한주면마찰력 산정식을 지반의 SPT-N치에 대한 함수로 제안하였다. 또한 현장 군앵커 인발시험 결과를 바탕으로 앵커간격과 영향원추반경의 비 및 앵커간격과 천공직경의 비의 2가지 형태로 압축형 지반앵커에 적합한 군효과 저감률 산정식을 제안하였다.

Keywords

References

  1. 김홍택, 강인규, 권영호, 김찬동 (2002), 압력분사 그라우팅 쏘일 네일의 유효경 평가와 실내모형실험, 대한토목학회 논문집, 제 22권 2-C호, pp.121-131.
  2. 서형준, 박성원, 정경한, 최항석, 이인모 (2009), 공팽창이론에 의한 압력식 쏘일네일링의 인발저항력 산정, 한국지반공학회 논문집, 제 25권 7호, pp.35-46.
  3. 이우진, 이원제, 안신환 (1998), PDA를 이용한 표준관입시험의 에너지전달효율 측정, 한국지반공학회 1998년 봄 학술발표회 논문집, pp.75-84.
  4. 이인모, 박성원, 정경환, 최항석 (2006), 실내 챔버 실험을 이용한 압력식 쏘일네일링의 거동 분석, 대한토목학회 정기학술대회발표, pp.186-190.
  5. 이인모, 최항석, 정경환, 박성원, 이충원 (2008), 가압 그라우팅 쏘일네일링의 인발저항력 증가 원인에 관한연구, 한국지반공학회 논문집, 제 24권 4호, pp.1-14.
  6. Habib, P. (1989), "Recommendations for the Design, Calculation, Construction and Monitoring of Ground Anchorages."
  7. Hanna, T.H. (1975), "Anchor Behaviour in Sand", Journal of the Soil Mechanics and Foundation Engineering, ASCE, pp.1741-1742.
  8. JGS. (2000), Standards for the Design and Construction of Ground Anchorages, The Japanese Geotechnical Society, JGS 4101-2000.
  9. Kleyner, I.M. and Krizek, R.J. (1995), "Mathematical Model for Bore-Injected Cement Grout Installations", Journal of Geotechnical Engineering, ASCE, Vol.121, No.11, pp.782-788. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:11(782)
  10. Littlejohn, G.S. (1970), "Soil Anchors", ICE Conference on Ground Engineering, London, pp.33-44.
  11. Yu, H.S. and Houlsby, G.T. (1991), "Finite Cavity Expansion in Dilatant Soils : Loading Analysis", Geotechnique, Vol.41, No.2, pp.173-183. https://doi.org/10.1680/geot.1991.41.2.173