DOI QR코드

DOI QR Code

72[W] Power LED Photovoltaic Lighting System including the Current Limiting Function

전류제한 기능을 갖는 72[W ]급 파워 LED 태양광 보안등

  • Park, Hyo-Sik (Dept. of New & Renewable Energy, Vision University of Jeonju) ;
  • Han, Woo-Yong (Dept. of New & Renewable Energy, Vision University of Jeonju)
  • 박효식 (전주비전대학 신재생에너지과) ;
  • 한우용 (전주비전대학 신재생에너지과)
  • Received : 2010.06.16
  • Accepted : 2010.08.10
  • Published : 2010.08.31

Abstract

In comparison with some other light sources, LED has merits such as long lifetime, pollution free, and high energy efficiency. Lately, due to development of LED with high brightness and capacity, LED, which has been applied in display system only, has applied in the field of lighting system. As power LED for lighting system can be burned out by heat problem, the driving current of power LED has to be controlled below the designed value. In this paper, power LED photovoltaic lighting system, which has the current limitting function, has been described. After photovoltaic power is generated from PV panel. it is charged into a battery. And then, after the charged power is converted to DC24[V] through a boost DC-DC converter, it is supplied to power LED at night. It has been validated by designing and testing of 72[W] power LED lighting system, which includes a PV charger, a boost DC-DC converter and a current limiter for driving power LED.

LED는 다른 광원에 비해 동작수명이 길고, 친환경적이며, 에너지 효율이 높은 장점을 가지고 있다. 최근 LED 기술의 발전으로 인해 고휘도, 고용량의 LED가 개발됨에 따라, 표시장치에만 적용되던 LED를 조명장치에도 적용하는 기술이 확산되고 있다. 조명장치에 적용되는 파워 LED는 발열문제로 인한 소손을 막기 위해 구동전류를 일정한 전류값 이하로 제어할 필요성이 있다. 본 논문은 파워 LED의 구동전류를 설정된 값 이하로 제어하는 전류제 한 기능을 갖는 파워 LED 태양광 보안등 개발에 관한 연구이다. 태양광 발전에 의해 생산된 전력을 DC12[V] 축전지에 저장한 후, 야간에 승압형 DC-DC 컨버터를 통해 DC24[V]로 승압시켜 파워 LED로 공급한다. 태양광 보안등 제어기, 승압형 DC-DC 컨버터, 72[W]급 파워 LED 램프를 개발하여 동작을 확인하고 관련 데이터를 도출함으로써 제안된 시스템의 타당성을 입증하였다.

Keywords

References

  1. Yuequan Hu, Milman M. Jovanovic, "LED Driver With Selt-Adaptive Drive Voltage", IEEE Trans. on Power Electronics, Vol.23, No.6, November 2008.
  2. N. Narendran, Y. Gu, "Life of LED-based white light sources", J. Display Technol,, vol.1, no.1, pp.167-171, Sep. 2005. https://doi.org/10.1109/JDT.2005.852510
  3. H. Broeck, G. Sauerlander, M. Vendt, "Power driver topologies and control schemes for LEDs", in Proc. IEEE Appl. Power Electron. Conf.(APEC), 2007, pp.1319-1325.
  4. M. Goldman, A. F. Witulski, "Predicting regulation for a multiple output current-mode controlled DC-to-DC converter", IEEE PESC, pp.617-623, 1993.
  5. K. H. Liu, F. C. Lee, "Topological constraints basic PWM converters", IEEE PESC, pp.164-172, 1988.
  6. V. Vorperian, "Simplified analysis of PWM converters using the model of the PWM switch, Part I: continuous conduction mode, Part II: discontinuous conduction mode", VPEC Seminar, September 1989.
  7. Harada K, Ninomiya T, Gu B., "The fundamentals of switched-mode converters", Corona Publishing, 1992.
  8. Chi K. Tse, Keith M. Adams, "Quasi-linear modeling and control of DC-DC converters", IEEE Trans. on Power Electronics, Vol.7, No.2, April 1992.
  9. Y. F. Liu, Paresh C. Sen, "New class-E DC-DC converter topologies with constant switching frequency", IEEE Trans. on Industrial Applications, Vol.32, No.4, July/August 1996.
  10. Zweibel K. "Harnessing solar power", Plenum Press, 1990, pp109-111.
  11. P. Huynh and B. H. Cho, "Design and analysis of microprocessor controlled peak power tracking system", in Proc. 27th, IECEC, 1992, Vol.45, No.1, February 1998.
  12. J. M. Kwon, K. H. Nam, B. H. Kwon, "Photovoltaic Power Conditioning System With Line Connection", IEEE Trans. on Industrial Applications, Vol.53, No.4, August 2006.