Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of Durability of Torsion Beam Axle Using Modal Stress Recovery Method

모달 응력 회복법(Modal Stress Recovery)을 이용한 Torsion Beam Axle 내구해석

  • Received : 2009.11.12
  • Accepted : 2010.07.27
  • Published : 2010.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

MSM (Modal Superposition Method) is a technique for analyzing structural durability by taking the vibration characteristics into consideration. In this paper, MSR (Modal Stress Recovery) method, which is similar to MSM, was reviewed to check its validity as a durability analysis method. The MSR method directly calculates the modal displacement time history in multibody dynamics analysis; as a result, the total analysis time is shorter than that of MSM method. We conduct durability analysis using the MSR method and a durability test of a torsion beam axle that is affected by various road loads within the natural frequency of the beam axle. The analysis results for critical location and durability were in good agreement with the respective test results. Therefore, durability analysis using the MSR method is effective in predicting the durability of the structures of various dynamic systems.

모달중첩법은 구조물의 진동특성을 고려하여 내구수명을 평가할 수 있는 내구해석 기법이다. 본 논문에서는 모달중첩법과 유사하면서도 다물체 동역학 해석시 모달좌표를 직접 계산하여 전체적인 해석시간을 줄일 수 있는 모달응력 회복법을 이용한 내구해석 기법의 타당성에 대하여 검토하였다. 이를 위해 자동차 부품 중 대표적으로 동특성을 고려해야 하는 토션빔 액슬에 대하여 모달응력 회복법을 이용한 내구해석 및 시험을 실시하였다. 해석결과는 시험결과와 취약위치, 내구수명 등이 양호한 일치 결과를 나타내었다. 따라서 모달응력 회복법을 이용한 내구해석 기법은 다양한 구조물의 동특성을 반영한 내구수명 평가에 적용될 수 있을 것이다.

Keywords

References

  1. MSC Fatigue, Adams User Manual, 2005.
  2. Craig, R. R. Jr and Bampton, M. C. C., 1968, "Coupling of Substructures for Dynamic Analysis," AIAA Jounrnal, Vol. 6, No. 7, pp. 1313-1319. https://doi.org/10.2514/3.4741
  3. Myklebust, L. I. and Skallerud, B., 2002, "Model Reduction Methods for Flexible Structures," 15th Nordic Seminar on Computational Mechanics, pp. 171-175.
  4. Kim, J., Jeon, J. W., Chang, C. S. and Kim, T. J., 2009, "A Comparison Study Among the Commercial Durability Analysis Codes for Arc-Welded Structures," Hyundai-Kia motor Group's conference.
  5. Kim, J.-G., Kim, K.-W., Kang, J.-S., Lee, D.-C., 2005, "VTL Development for Durability Analysis of Suspension by Using MSR Method," MSC User's Conference.
  6. Suh, K., Lim, H., Song, B. and Ahn, C., 2008, "Virtual Fatigue Analysis of a Small-sized Military Truck Considering Actual Driving Modes," KSAE, Vol 16, No. 4, pp. 120-127.