References
- 이재승, 정경수, "고강도 콘크리트의 폭렬발생 원인조사에 관한 실험적 연구", 대한건축학회 논문집-구조계, 24, 101 (2008).
- 이세현, 송 훈, "방 ․ 내화재료 설계 시 고려사항", 건축, 51, 65 (2007).
- A. Genovese and R. A. Shanks, "Fire performance of poly(dimethyl siloxane) composites evaluated by cone calorimetry", Composites: Part A, 39, 398 (2008). https://doi.org/10.1016/j.compositesa.2007.09.009
- A. Genovese and R. A. Shanks, "Structural and thermal interpretation of the synergy and interactions between the fire retardants magnesium hydroxide and zinc borate", Polym. Degrad. Stab, 92, 2 (2007). https://doi.org/10.1016/j.polymdegradstab.2006.10.006
- 황택성, 이범재, 양윤규, 최재훈, 김현중, "난연성 고분자 재료의 기술개발 동향", 공업화학 전망, 8, 36 (2005).
- S. Hamdani, C. Longuet, D. Perrin, J. Lopez-cuesta, and F. Ganachaud, "Flame retardancy of silicone-based materials", Polym. Degrad. Stab., 94, 465 (2009). https://doi.org/10.1016/j.polymdegradstab.2008.11.019
- 최신 국내 ․ 세계의 난연제 시장 및 환경규제 현황 보고서 (2005).
- I. Haukur and L. Anders, "Recent Achievents Regarding Measuring of Time-Heat and Time-Temperature development in Tunnel", Safe & Tunnels, First International Symposium. Prague (2004), pp. 87-96.
- G. Camino, S. M. lomakin, and M. Lazzari, "Polydimethylsiloxane thermal degradation Part 1. Kinetic aspects", Polymer, 42, 2395 (2001). https://doi.org/10.1016/S0032-3861(00)00652-2
- G. Camino, S. M. lomakin, and M. Lazzari, "Polydimethylsiloxane thermal degradation Part 2. The degradation mechanisms", Polymer, 43, 2011 (2002). https://doi.org/10.1016/S0032-3861(01)00785-6
- H. Homma, T. Kuroyagi, K. Izumi, C. L. Mirley, J. Ronzello, and S. A. Boggs, "Evaluation on surface degradation of silicone rubber using thermogravimetric analysis", Electrical Insulating Materials, 1998. Proceedings of 1998 International Symposium on, 27-30 Sept. 1998 Page(s):631-634.
- X. Xu, C. Gao, and Q. Zheng, "Rheological characterization of room temperature vulcanized silicone sealant: Effect of filler particle size", Polym. Eng. Sci., 48, 656 (2008). https://doi.org/10.1002/pen.20992
- 심상은, "Structure and properties of precipitated silica filled silicone rubber", Rubber Technology, Vol. 7, No. 1, 2006.
- K. Pirre, C. Gregoire, and G. Christophe, "High-temperature behavior of HPC with polypropylene fiber from spalling to microstructure", Cement and Concrete Research, 31, 1487 (2001). https://doi.org/10.1016/S0008-8846(01)00596-8