증발디젤분무의 공간적 구조해석에 관한 기초 연구

Basic Study on the Spatial Structure Analysis of the Evaporative Diesel Spray

  • 염정국 (동아대학교 기계공학과)
  • 투고 : 2010.03.02
  • 심사 : 2010.04.21
  • 발행 : 2010.06.30

초록

The purpose of this study is to analyze heterogeneous distribution of branch-like structure at downstream region of inner spray. The previous many studies about diesel spray structure have yet stayed in the analysis of 2-D structure, and there are very few of informations which are concerned with 3-D analysis of the structure. The heterogeneous distribution of droplets in inner spray affects the mixture formation of diesel spray, and also the combustion characteristics of the diesel engines. Therefore, in order to investigate 3-D structure of evaporative spray the laser beam of 2-D plane was used in this study. Liquid fuel was injected from a single-hole nozzle (l/d=5) into a constant-volume vessel under high pressure and temperature in order to visualize the spray phenomena. The incident laser beam was offset on the central axis. From the images analysis taken by offset of laser beam, we examine formation mechanism of heterogeneous distribution by vortex flow at the downstream of the diesel spray. As the experimental results, the branch-like structure formed heterogeneous distribution of the droplets consists of high concentration of vapor phase in the periphery of droplets and spray tip of branch-like structure. Also the 3-D spatial structure of the evaporative diesel spray can be verified by images obtained from 2-D measurement methods.

키워드

참고문헌

  1. Jang Y. J. and Kamimoto T., 1988, "A Study on the Diesel Spray by Means of Image Analysis of Shadow Photographs", Trans. of the KSME(B), Vol. 12, No. 2, pp. 319-327.
  2. Jang Y. J., Park H. J. and Kamimoto T., 1990, "A Study on the Diesel Flame by Means of Image Analysis of Shadow Photographs", Trans. of the KSME(B), Vol. 14, No. 5, pp. 1234-1243.
  3. Nishida K., Hiroyasu H. and Suzuki M., 1988, "Analysis of Fuel Jet and Vaporizing Spray by Combined Schlieren and Computed Tomographic Technique", KSME/JSME THERMAL and FLUID Engineering Conference, Vol. 1, pp. 423-428.
  4. Lee S. W., Lee J. S. and Kuk K., 2002, "Effect of Convex Wall Curvature on Three-Dimensional Behavior of Film Cooling Jet", KSME International Journal(JMST), Vol. 16 No. 9, pp. 1121-1136. https://doi.org/10.1007/BF02984432
  5. Dan T., 1996, "Turbulent structure and formation mechanism of diesel sprays", Doshisha University Doctoral Thesis, Japan.
  6. Takahashi T., 1999, "Analysis on the vaporization, dispersion and mixing process in unsteady diesel spray", Doshisha University Master's Thesis, Japan.
  7. Azetsu A. et al., 1990, "A Study on the Structure of Diesel Spray(2-D) Visualization of the Non-Evaporating Spray", COMODIA90(in Kyoto), pp. 199-204.
  8. Yeom J. K. et al., 2007, "A Study of the Mixture Formation Process of a Diesel Spray Under Phase Change", KSME International Journal(JMST), Vol. 21, pp. 1120-1128.