References
- Arora, J. S. (2004). Introduction to Optimum Design. 2nd ed. New York: Elsevier/Academic Press.
- Arora, J. S., Huang, M. W., and Hsieh, C. C. (1994). Methods for optimization of nonlinear problems with discrete variables: A review. Structural Optimization, 8, 69-85. https://doi.org/10.1007/BF01743302
- Baker, A. A., Dutton, S., and Kelly, D. (2004). Composite Materials for Aircraft Structures. 2nd ed. Reston, VA: American Institute of Aeronautics and Astronautics.
- Chambers, A. R., Mowlem, M. C., and Dokos, L. (2007). Evaluating impact damage in CFRP using fibre optic sensors. Composites Science and Technology, 67, 1235-1242. https://doi.org/10.1016/j.compscitech.2006.05.023
- Chen, J. K., Allahdadi, F. A., and Carney, T. C. (1997). Highvelocity impact of graphite/epoxy composite laminates. Composites Science and Technology, 57, 1369-1379. https://doi.org/10.1016/S0266-3538(97)00067-5
- Chen, S. Y. (2001). An approach for impact structure optimization using the robust genetic algorithm. Finite Elements in Analysis and Design, 37, 431-446. https://doi.org/10.1016/S0168-874X(00)00056-1
- De Jong, K. A. (1975). An Analysis of the Behavior of a Class of Genetic Adaptive Systems. PhD Thesis, University of Michigan.
- Fujii, K., Aoki, M., Kiuchi, N., Yasuda, E., and Tanabe, Y. (2002). Impact perforation behavior of CFRPs using high-velocity steel sphere. International Journal of Impact Engineering, 27, 497-508. https://doi.org/10.1016/S0734-743X(01)00152-X
- Gower, H. L., Cronin, D. S., and Plumtree, A. (2008). Ballistic impact response of laminated composite panels. International Journal of Impact Engineering, 35, 1000-1008. https://doi.org/10.1016/j.ijimpeng.2007.07.007
- Kogiso, N., Watson, L. T., Gürdal, Z., and Haftka, R. T. (1994). Genetic algorithms with local improvement for composite laminate design. Structural Optimization, 7, 207-218. https://doi.org/10.1007/BF01743714
- Lin, C. C. and Lee, Y. J. (2004). Stacking sequence optimization of laminated composite structures using genetic algorithm with local improvement. Composite Structures, 63, 339-345. https://doi.org/10.1016/S0263-8223(03)00182-X
- Livermore Software Technology Corporation. (2008). LS-DYNA Keyword User’s Manual. Livermore, CA: Livermore Software Technology Corporation.
- Lopez-Puente, J., Zaera, R., and Navarro, C. (2008). Experimental and numerical analysis of normal and oblique ballistic impacts on thin carbon/epoxy woven laminates. Composites Part A: Applied Science and Manufacturing, 39, 374-387. https://doi.org/10.1016/j.compositesa.2007.10.004
- Naik, N. K. and Shrirao, P. (2004). Composite structures under ballistic impact. Composite Structures, 66, 579-590. https://doi.org/10.1016/j.compstruct.2004.05.006
- Park, I. J., Jung, S. N., Kim, D. H., and Yun, C. Y. (2009). General purpose cross-section analysis program for composite rotor blades. International Journal of Aeronautical and Space Sicences, 10, 77-85. https://doi.org/10.5139/IJASS.2009.10.2.077
- Soremekun, G., Gurdal, Z., Haftka, R. T., and Watson, L. T. (2001). Composite laminate design optimization by genetic algorithm with generalized elitist selection. Computers and Structures, 79, 131-143. https://doi.org/10.1016/S0045-7949(00)00125-5
- Stander, N., Roux, W., Goel, T., Eggleston, T., and Craig, K. (2008). LS-OPT User’s Manual. Livermore, CA: Livermore Software Technology Corporation.
- Talebi, H., Wong, S. V., and Hamouda, A. M. S. (2009). Finite element evaluation of projectile nose angle effects in ballistic perforation of high strength fabric. Composite Structures, 87, 314-320. https://doi.org/10.1016/j.compstruct.2008.02.009
- Van Hoof, J. (1999). Modelling of Impact Induced Delamination in Composite Materials. PhD Thesis, Carleton University.
- Walker, M. and Smith, R. E. (2003). A technique for the multiobjective optimisation of laminated composite structures using genetic algorithms and finite element analysis. Composite Structures, 62, 123-128. https://doi.org/10.1016/S0263-8223(03)00098-9
- Will, M. A., Franz, T., and Nurick, G. N. (2002). The effect of laminate stacking sequence of CFRP filament wound tubes subjected to projectile impact. Composite Structures, 58, 259-270. https://doi.org/10.1016/S0263-8223(02)00050-8
- Yong, M., Falzon, B. G., and Iannucci, L. (2008). On the application of genetic algorithms for optimising composites against impact loading. International Journal of Impact Engineering, 35, 1293-1302. https://doi.org/10.1016/j.ijimpeng.2007.10.004
Cited by
- NiTi SMA Wires Coupled with Kevlar Fabric: a Real Application of an Innovative Aircraft LE Slat System in SMAHC Material 2017, https://doi.org/10.1007/s10443-017-9618-4