한국농공학회논문집 (Journal of The Korean Society of Agricultural Engineers)

  • 제52권5호
  • /
  • Pages.19-26
  • /
  • 2010
  • /
  • 1738-3692(pISSN)
  • /
  • 2093-7709(eISSN)
한국농공학회 (The Korean Society of Agricultural Engineers)
권호 표지
DOI QR코드

DOI QR Code

농업용 철근콘크리트 구조물의 합리적인 최적설계 -수로교 상부구조물-

Reasonable Optimum Design of Agricultural Reinforced Concrete Structure - Superstructures of Aqueduct -

  • 김종옥 (공주대학교 산업과학대학 지역건설공학과) ;
  • 박찬기 (공주대학교 산업과학대학 지역건설공학과) ;
  • 차상선 (공주대학교 산업과학대학 지역건설공학과)
  • 투고 : 2010.06.09
  • 심사 : 2010.08.10
  • 발행 : 2010.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study was conducted to find out the reasonable optimum design method of agricultural reinforced concrete structures. Selected design variables are the dimension of concrete section, reinforced steel area, and objective function is formulated by cost function. To test the reliability, efficiency, possibility of application and reasonability of optimum design method, both continuous optimization method and mixed-discrete optimization method were applied to the design of reinforced concrete superstructure of aqueduct and application results were discussed. It is proved that mixed-discrete optimization method is more reliable, efficient and reasonable than continuous optimization method for the optimum design of reinforced concrete agricultural structures.

키워드

참고문헌

  1. Adamu, A., and B. L. Kalihaloo, 1995a, Minimum cost design of RC beams with segmentation using continuumtype optimality criteria, Structural Optimization 9: 220-235. https://doi.org/10.1007/BF01743974
  2. Adamu, A., and B. L. Kalihaloo, 1995b, Minimum cost design of RC frames using the DCOC method, Part I: Columns under uniaxial bending action, Structural Optimization 10: 16-32. https://doi.org/10.1007/BF01743691
  3. Adamu, A., and B. L. Kalihaloo, 1995c, Minimum cost design of RC frames using the DCOC method, Part II: Columns under biaxial bending action, Structural Optimization 10: 33-39. https://doi.org/10.1007/BF01743692
  4. Al-Harthy, A. S., and D, M. Frangopol, 1994, Reliabilitybased design of prestressed concrete beams, Journal of Structural Engineering, ASCE 120(11): 3156-3177. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:11(3156)
  5. Chon, M. Z., and Dinovitzer, 1994, Application of structural optimization, Journal of Structural Engineering, ASCE 120(2): 617-650. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:2(617)
  6. Chon, M. Z., and Lounis, Z., 1993, Optimum limit design of continuous prestressed concrete beams, J. Struct. Eng., ASCE 119(12) : 3551-3569. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:12(3551)
  7. Chon, M. Z. and Lounis, Z.,1994, Optimal design of structural concrete bridge systems, Journal of Structural Engineering, ASCE 120(9): 2653-2674. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:9(2653)
  8. Fang, H. Azarm, S. and Bernold, L., 1994, Multilevel multiobjective optimization in precast concrete well panel design, Engineering Optimization 22: 291-322.
  9. Kalihaloo, B. L., 993, Most efficient NLP techniques in optimum structural frame design, Engineering Optimization 20(4): 261-272. https://doi.org/10.1080/03052159308941284
  10. Kim, J. O., 1997, Efficient optimum design of reinforced concrete structures using mixed-discrete optimization method, Journal of the Korea Society of Agricultural Engineers 39(2): 32-43.
  11. Lourenco, P. B. and Figueiras, J. A., 1995, Solution for the design of reinforced concrete plates and shells, Journal of Structural Engineering, ASCE 121(5): 815- 823. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:5(815)
  12. Min-Wey Huang and Jasbir S. A., 1995, Engineering optimization with discrete variables, Proceedings of the 36th AIAA/ASME/ASCE/AHS/ASC: 1475-1485.
  13. Moharrami, H. and Grierson, D. E., 1993, Computerautomated design of reinforced concrete frameworks, Journal of Structural Engineering, ASCE 119(7): 2036 -2058. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:7(2036)
  14. Schmit, L. A., 1960, Structural design by systematic synthesis, Proc. 2nd Conference on Electronic Computation, ASCE, New York: 105-122.
  15. Sepulveda A. E., 1995, Optimal material selection using branch and bound techniques, A1AA Journal 33(2): 340-347. https://doi.org/10.2514/3.12366
  16. Shui-Shun Lin, Chun AZhang and Hsu-Pin Wang, 1995, On mixed-discrete nonlinear optimization problems,; A comparative study, Engineering Optimization 23: 287-300. https://doi.org/10.1080/03052159508941359
  17. Vanderplaats R&D, 2008, VisualDOC User's Manual, Vanderplaats Research & Development, Inc.
  18. Vanderplaats, G. N., 1982, Structural optimization, past, present and future, AIAA Journal 22(7): 992-1000.
  19. Vanderplaats, G. N., 1984, Numerical Optimization Techniques for Engineering Design, McGRAW-HILL, New York.
  20. Vanderplaats, G. N., 1993, Thirty years of modern structural optimization, Advanced in Engineering Software 16: 81-88. https://doi.org/10.1016/0965-9978(93)90052-U

피인용 문헌

  1. Optimum Design of Reinforced Concrete Agricultural Aqueduct Abutment and Pier Using Continuous and Mixed-Discrete Optimization Methods vol.52, pp.6, 2010, https://doi.org/10.5389/KSAE.2010.52.6.049