Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Prediction Model for the Microstructure and Properties in Weld Heat Affected Zone: V. Prediction Model for the Phase Transformation Considering the Influence of Prior Austenite Grain Size and Cooling Rate in Weld HAZ of Low Alloyed Steel

용접 열영향부 미세조직 및 재질 예측 모델링: V. 저합금강의 초기 오스테나이트 결정립크기 및 냉각 속도의 영향을 고려한 용접 열영향부 상변태 모델

  • 김상훈 (한양대학교 신소재공학부) ;
  • 문준오 (한양대학교 신소재공학부) ;
  • 이윤기 (한양대학교 신소재공학부) ;
  • 정홍철 (POSCO 기술연구원 강재솔루션그룹) ;
  • 이창희 (한양대학교 신소재공학부)
  • Received : 2010.03.11
  • Accepted : 2010.05.03
  • Published : 2010.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, to predict the microstructure in weld HAZ of low alloyed steel, prediction model for the phase transformation considering the influence of prior austenite grain size and cooling rate was developed. For this study, six low alloyed steels were designed and the effect of alloying elements was also investigated. In order to develop the prediction model for ferrite transformation, isothermal ferrite transformation behaviors were analyzed by dilatometer system and 'Avrami equation' which was modified to consider the effect of prior austenite grain size. After that, model for ferrite phase transformation during continuous cooling was proposed based on the isothermal ferrite transformation model through applying the 'Additivity rule'. Also, start temperatures of ferrite transformation were predicted by $A_{r3}$ considering the cooling rate. CCT diagram was calculated through this model, these results were in good agreement with the experimental results. After ferrite transformation, bainite transformation was predicted using Esaka model which corresponded most closely to the experimental results among various models. The start temperatures of bainite transformation were determined using K. J. Lee model. Phase fraction of martensite was obtained according to phase fractions of ferrite and bainite.

Keywords

References

  1. K. Easterling: Introduction to the physical metallurgy of welding, Butterworths, 1983, 104
  2. Jong-Geun Ryu, Joon-Oh Moon, Chang-Hee Lee, Sang-Ho Uhm, Jong-Bong Lee and Woong-Sung Chang: Journal of KWS, 24-1 (2006), 77 (in Korean)
  3. Sang-Ho Uhm, Joon-Oh Moon, Hong-Chul Jeong, Jong-Bong Lee and Chang-Hee Lee: Journal of KWS, 24-4 (2006), 323 (in Korean)
  4. Joonoh Moon, Sanghoon Kim, Hongchul Jeong, Jongbong Lee and Changhee Lee: Journal of KWJS, 25-2 (2007), 164 (in Korean)
  5. W. A. Johnson and R. F. Mehl: Trans. AIME, 125 (1939), 416
  6. M. Avrami: J. Chem. Phy., 7 (1939), 1103 https://doi.org/10.1063/1.1750380
  7. F. S. Lepera: Metallography, 12 (1979), 263 https://doi.org/10.1016/0026-0800(79)90041-7
  8. E. Girault, P. Jacques, Ph. Harlet, K. Mols, J. Van Humbeeck, E. Aernoudt and F. Delannay: Materials Characterization, 40 (1998), 111 https://doi.org/10.1016/S1044-5803(97)00154-X
  9. A. Saha Podder, A. S. Pandit, A. Murugaiyan, D. Bhattacharjee and R. K. Ray: Ironmaking and Steelmaking, 34 (2007), 83 https://doi.org/10.1179/174328106X149860
  10. B. Debray, P. Teracher and J. J. Jonas: Metall. Trans. A, 26A (1995), 99
  11. C. Lee, S. Uhm, K. Kim, K. Lee and C. Lee: ISIJ international, 41 (2001), 1383 https://doi.org/10.2355/isijinternational.41.1383
  12. P. C. Campbell, E. B. Hawbolt and J. K. Brimacombe: Metall. Trans. A, 22A (1991), 279
  13. I.V. Samarasekera, D.Q. Jin and J.K. Brimacombe: 38th MWSP Conference Proceedings, ISS, XXXIV (1997), 313
  14. M. Umemoto, K. Horiuch and I. Tamura: Trans. ISIJ, 22 (1982), 854 https://doi.org/10.2355/isijinternational1966.22.854
  15. A. Matsuzaki and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 15 (1999), 519
  16. L. W. Graham and H. J. Axon: J. Iron Steel Inst., 191 (1959), 361
  17. R. M. Dey: Trans. of the Indian Inst. of Metals, 39 (1986), 169
  18. E. V. Konopleva and H. J. Mcqueen: CIM Bulletin, 90 (1997), 82
  19. E. B. Hawbolt, B. Chau and J. K. Brimacombe: Metall. Trans. A, 16A (1985), 565
  20. O. Kwon, K. J. Lee, K. B. Kang, J. K. Lee, P. J. Lee, Y. S. Park, E. K. Ro, K. J. Min, J. D. Lee and K. C. Yoo: J. of the Korean Inst. of Met. & Mater., 30-11 (1992), 1335 (in Korean)
  21. P. C. Campbell, E. B. Hawbolt and J. K. Brimacombe: Metall. Trans. A, 22A (1991), 279
  22. E. Esaka, J. Wakida, M. Takahashi, O. Katano and S. Harada: Seitetsu-Kenkyu, 32 (1986), 92
  23. R. A. Grange : Met. Prog., 4 (1961), 73
  24. K. W. Andrews : JISI, 7 (1965), 721
  25. W. Steven and A. G. Haynes : JISI, 183 (1956), 349
  26. T. Kunitake and Y. Okada : Tetsu-to-Hagane, 84 (1998), 137 https://doi.org/10.2355/tetsutohagane1955.84.2_137
  27. S. H. Lee, J. M. Choi, Y. R. Cho and K. J. Lee : Proceedings of ICASS, Aug. 22-24, (2006), 857